10 Minute Cam Swap!

Подписаться 63 тыс.

Просмотров 904 тыс.

50% 1

can you bore a 5.3 into a 6.0?
• CAN YOU BORE A 4.8 / 5...
only what you NEED to know!
• The BEST LS Cam Swap V...
Amazon now has a budget valve spring compressor!
amzn.to/2yjyw3r
Special LS Style Harmonic Balancer Puller
amzn.to/2H2w1Es
Amazon Also sells LS3 valve springs good for .560 lift! perfect for your mild budget cam swap!
amzn.to/2Y8cBnm
LS3 Chevy SS Sedan cam swap.
• LS CAM SWAP
follow on Instagram pBm10lfhF8...
🎶 🎶 🎶 🎶
Music: After All
Artist: Sovereign Sound
Music: Run
Artist: Sovereign Sound
Link To Artist Below
open.spotify.com/artist/1VCIf...

Авто/Мото

Опубликовано:

27 фев 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,1 тыс.

@BoBuilds 4 года назад

Amazon now has a budget valve spring compressor! amzn.to/2yjyw3r Special LS Style Harmonic Balancer Puller amzn.to/2H2w1Es Amazon Also sells LS3 valve springs good for .560 lift! perfect for your mild budget cam swap! amzn.to/2Y8cBnm

@drmachinewerke1 3 года назад

Where is your shop. And how much down time with tune etc.

@FCD-dl7bk 3 года назад

Does this swap apply for a 6.2 cam swap in a Denali also.......thanks in advance for your reply and thank you for the awesome video with tools needed and specs.

@ss0073 3 года назад

@@FCD-dl7bk Yes

@twistedarrow3574 3 года назад

Takes 10 min an charge 500$ lol

@chevy4life01 3 года назад

What cam did u put in??

@chrismayes2149 3 года назад

Finally, a guy that is focused on the job and not talking throughout the whole video. This is honestly the most straight to the point no nonsense video I've found. It's also helpful to me because I want to find one an old 4.3 silverado.

@originalg6918 3 года назад

Why cam a 4.3 lol just swap it with a v8

@chrismayes2149 3 года назад

Because some people like going with the oddball engine and going against the grain instead of doing what everyone else does.

@BoBuilds 3 года назад

It's not a 4.3? Its a 4.8 V8

@jasonensley1601 3 года назад

couldnt agree more, didnt have to hear how great he thinks he is how many burnouts hes done, he fidnt show an entire photo album of himself skydiving swimming with the dolphins or advertising his daughterd girlscout sales,"granted id most likely have bought some boxes of cookies, but ya, this was one of the best tutorials ive seen.

@jasonensley1601 3 года назад

@@originalg6918 i thought it was a 4.8 v8 im pretty sure it was i could b wrong tho

@veritasvincit4178 3 года назад

10 min of professional on video= me taking two days as I refer back to this video and others on RU-vid

@chefzackkasmar6767 2 года назад

100% on point!! Lol

@tyronetripod8536 2 года назад

yeah more likely even took him a couple hours

@BoBuilds 2 года назад

Yeah its a 3 hour job if everything goes smooth. I just meant cam swap done in a 10 minute video lol

@chefzackkasmar6767 2 года назад

@@BoBuilds Great Job Man. My comment meant that When I do my Cam swap I will reference your Videos non stop, playing and pausing over and over. Thanks for taking the time to share! I am sure you have helped more than just me with this vid! At least 40 of the views on this video are from me watching it to psych myself up to have the balls to do my own swap! It worked, Im going for it! 💪💪🍻Cheers.

@jjano2320 2 года назад

It takes me 10 min. to find the right tools.

@rjack151 2 года назад

I like how homie is just over here busting out a task, and tweedle dee and tweedle fuck are in the background fiddle fucking around.

@LJimenez0185 4 года назад

Finally a complete guide, I’ve watch different videos on how to do a Cam swap but this one is the best, simple and pointing the right angle on the video, great video, thanks for sharing!!!

@BoBuilds 4 года назад

Thank you!

@justingriffith2991 2 года назад

@@BoBuilds wa t kind cam. In it

@Ka_Gg 3 года назад

Awesome video! Straight to the point. You didn't talk about some stupid story for 5 minutes about how you needed more power. You didn't spend 2 minutes struggling to find the right socket for this and that. We don't need to see you remove every single rocker arm bolt. You kept it simple. The world needs more videos like this.

@DavidToyotaHead13 9 месяцев назад

The OG RU-vid videos with minimal editing. Subbed!

@Ka_Gg 9 месяцев назад

@@DavidToyotaHead13 yep. Back when videos were to the point. Now it's about being a "content creator" and being entertaining.

@jacobnicoletti1235 3 года назад

I always thought you would have to remove basically the whole top end so you could get to the lifters. But then you used that wooden dowel. Didn’t even know that trick existed. Good work brother, you taught me a few things today.

@BoBuilds 3 года назад

That's what it's all about! Glad this video helped you!

@doctorboylerdemexicali8905 3 года назад

How many extra horses did it gain with the swap?

@SuperchiefApache 3 года назад

Yeah, I thought that was just freaking awesome!!!

@SuperchiefApache 3 года назад

@@doctorboylerdemexicali8905 Man, I have not a clue, but it sounded NASTY!!!!

@doctorboylerdemexicali8905 3 года назад

@@SuperchiefApache awesome

@kirkmcknight113 3 года назад

I am thoroughly impressed with the work you did. I'm 70 yrs. old and don't know if I would try that, but your video would be my go to on how to get it done. This was an awesome video and made a big deal seem like changing a set of plugs. Y'all do good work!!! Kirk n TX.

@SuperchiefApache 3 года назад

Super good, straight forward, no stupid stuff in between!

@gtcp85 3 года назад

Finally... A tech that is not afraid to get his hands into the job. Seen guys go through what seems like a box of gloves a day when the shop pays for them. Oh yeah.. Content is great too.. Thanks

@vincebermudez869 3 года назад

This is hands down the best cam swap video on the internet as of yet. You guys give the average Joe the confidence to take on this project and complete it from start to finish with all the details thrown in. Thank you for taking the time to show us shade trees hows it done properly and effectively. Liked and subscribed. 👍

@theredfive 2 года назад

this is the best step by step cam swap video without all the bullshit commentating, straight to the point , very informative. keep up with the great videos, thanks for the info . will be doin swap asap

@sxs4l245 3 года назад

Best no bull spit video I have seen yet! 5 stars and 2 thumbs up.

@YungJackie22 3 года назад

Came here to see a cam swap but I heard east 1999 aswell, my day has been made

@shedred1967 2 года назад

Stock is good, an aftermarket cam for your specific needs is just great. That sounded soooo much better.

@skeetermcswagger0U812 2 года назад

The best Cam swamp video for an LS motor I've ever seen in my entire life!!!!!!!

@BoBuilds 2 года назад

Thanks a lot man! I tried to be straight to the point and no Bull shi%

@skeetermcswagger0U812 2 года назад

@@BoBuilds You have successfully managed to do just that!!!👍

@rupertburrows9767 3 года назад

Wow this is definitely one of the best instructional videos i've watched. Thanks!

@BoBuilds 3 года назад

Thank you!

@Usmc913 3 года назад

You have made my cam swap so much easier. Thank you. People make it sound so much more difficult than it is.

@tanneralexander5886 2 года назад

Does the truck need to be tuned after cam and headers

@Usmc913 2 года назад

@@tanneralexander5886 yes you do

@savagesock3598 Год назад

@@Usmc913 what's do you need to do to it? Pcm reprogram?

@erickuribe9860 3 года назад

Thanks for the torque specs👍

@Nakira2000 2 года назад

Oh no, I was afraid of this. Thank you for the video its very helpful. This will be one project I cannot do physically., but gives me an understanding of what needs to be done

@ishotjustin 4 года назад

Absolutely the best step by step video! Had everything I needed to know and good audio for end result. Thank you for making a straight to the point video!!

@BoBuilds 4 года назад

Thank you so much for this comment!

@ishotjustin 4 года назад

GreaseMonkeyMods well thank you so much for such a useful video!

@King87brougham51 4 года назад

A true complete guide to ls cam and valve springs swap👍🏿👍🏿👍🏿👍🏿💪🏿💪🏿💪🏿💪🏿👌🏿👌🏿👌🏿👌🏿💯💯💯💯🔥🔥🔥video

@BoBuilds 4 года назад

Thank you man, glad you liked the vid! Hope it helps!

@King87brougham51 3 года назад

Man I love this video it helped me do my first cam swap thanks

@donellis5005 3 года назад

I get the feeling he's done this a couple of dozen times

@reed_shaw1816 Год назад

Thank you sir for actually working/showing and not talking

@coarsegrind 3 года назад

Instead of pulling the top hose off the pump, pull it off the radiator. Then use a shop vacuum to pull the remaining antifreeze out of the block. No Mess!

@josephstalin9500 2 года назад

This video gives me the confidence I needed to do it at home. I'll be back in a couple months once I have everything ready for an install

@loafoftrees7046 2 года назад

Best of luck

@davidshull8929 3 года назад

Great summary! I wish it was this easy for removing DOD. :-)

@SuperEastcoast 2 года назад

To the point video!! Thank you for the professional work and easy to follow video.

@eddieroberts6242 2 года назад

Like most, I'm very picky about who I trust to work on my 2007 Tahoe LTZ. After watching this excellent video, I'd let you get your hands on my girl any time. Meticulous and exact work demonstrated. You da man.

@BBB-ly8ro 3 года назад

Total pro video and work. I have to mention to other viewers, if your working outside and a wind blew all those pecan leaves down on the your project it would have been a preventable disaster. I’m so glad I don’t have to take my cam out at this time. Good luck all. Great video.

@brandonbennett1564 3 года назад

Awesome work man!thanks for showing this.

@jessewalz 7 месяцев назад

Most well done tutorial on RU-vid period!

@BigBootySeeker2 3 года назад

Amazing video and amazing work, what you do is an art form!

@whowho7969 3 года назад

Best cam swap video 👍 thank you

@leatherman1934 3 года назад

Idk about 10 minutes, but cool swap! Sounds sweet!

@BoBuilds 3 года назад

Just meant the video is 10 minutes lol but thanks!

@BCooper89 3 года назад

@@BoBuilds what cam and lifters did you install? And did you have to have it tuned?

@chrisjeanotte9879 3 года назад

Cam?? And did it need to be tuned

@carlosbermudez4444 3 года назад

I bite click, lol and I bit

@SlickNickanarchysyndicate 3 года назад

Of course any cam needs to be tuned

@zincyellowmach1523 2 года назад

Good straight and to the point video. I would caution everyone that the crank pulley is a one time use unless you drill and key it. Just installing the old one can result in a spun crankshaft pulley. That's muy mal

@micahmallett2989 3 года назад

I usually don't comment but this video was perfect! Step by step captions with music are nice. No talking. No bs. Thanks for throwing in the torque specs at the end. Keep it up! 🤘

@juanlanda2441 Год назад

It left me with lots of questions.

@shanefoster2367 4 года назад

Thanks, I plan on doing this to my 5.3 HO

@mygtr2021 3 года назад

That was very relaxing.. good job dude.

@BoBuilds 3 года назад

Thank you!

@cristiangarciamoreno1001 2 года назад

Yoooo what a guy, impressive!! Haven’t seen a video like this in a very long time

@TexasGTO 3 месяца назад

Learned a new trick to remove fan clutches. Thanks!

@1975ssnova 2 года назад

Thanks for the video! I’m doing a BTR stage 1 cam in a couple weeks. Along with the Diablosports i3 intune platinum tuner to compliment it. Then will get the Lew from Diablo to hook me up with a custom tune for me.

@rb1602 3 года назад

Love the vid. No bullsh!t intros. All business.

@narule2695 3 года назад

I wish all videos were like this

@ramondhunter8191 Год назад

Best video on a cam swap I have seen on YT

@fredstone3875 3 года назад

Finally a how to video for grown UPS with some Common sense excellent editing thank you.

@radomark408 3 года назад

Nice! Made that look super easy with all the right tools! If you were closer would love to take my truck to yall! Well done

@cargotoolshop5319 2 года назад

Expect the cam swap to take the better part of a day not just ten minutes

@radomark408 2 года назад

@@cargotoolshop5319 well obviously..

@migicman02 3 года назад

Only a real professional would share torque specs at the end of the video, big fan!

@tedwarne8236 2 года назад

They do make books for that

@JordanKline 7 месяцев назад

I have never found a more helpful to the point video.

@PaulysAuto 9 месяцев назад

My guy you are so talented...uninterrupted too 😂 Brilliant job of making this video, you did a great job of filming here!

@nickboucher7339 3 года назад

Great title dude!... Nice editing. I thought you were going to hole saw the grill, AC condenser, trans cooler, and radiator to put that cam in, in ten minutes......

@MadballBaby 3 года назад

Love tha sound of that lope ,want a cam in my 5.7 Tahoe,Maryland showing ❤️

@SuperchiefApache 3 года назад

Go Maryland....what part? I’m northern Fredrick County!

@MadballBaby 3 года назад

@@SuperchiefApache /Prince George’s county,ayeyyyy

@SuperchiefApache 3 года назад

@@MadballBaby Ha! My old stomping grounds! I went to Northwestern Sr High in Adelphi, and lived in Lanham, Hyattsville, Beltsville, East Pines, and Bladensburg area! PG county enough? Lol!

@STREETFIGHTER50 3 года назад

Wow it’s not as bad to do as I thought! Awesome vids!

@jerryrogers2516 2 года назад

thanks so much please keep the 5.3 coming lol I need all the info I can get. your a life saver

@mrhookups 4 года назад

BEST HOW TO VIDEO!! EVEN MY MOM CAN SWAP A CAM WITH THIS VIDEO!💯👍

@BoBuilds 4 года назад

Thank you!

@mrhookups 4 года назад

GreaseMonkeyMods Question....What’s the Specs on that Cam You Installed?

@Stingyduce 3 года назад

Man I sold my 04 Tahoe the cam was bad on a lobe causing mis fire was told it would be 2500to3k to do the job wish I knew this stuff . Great video bro!!!

@cargotoolshop5319 2 года назад

They told my parents $7500 and $500 later in my shop we had the afm/did delete done with new gaskets and bolts and new cam and lifters, new exhaust studs and oil pump o ring fix, stay strong and smart

@billyd0468 2 года назад

If you already lost a cam lobe, the metal has already went through the engine. Any repair will most likely be short term. The damage has been done. Band Aid repairs will destroy a shops reputation. The shop needed to explain this along with their quote.

@bigmexicanchurro 2 года назад

Fantastic video. Well done. Truck sounds great

@ccale03 2 года назад

I know way late to the game, and only watched 2 of your videos so far but definitely it sure why you don’t have more followers. Best how to I’ve seen on RU-vid, love that you put torque specs at the end. 👍👍

@BoBuilds 2 года назад

Thanks man that means a lot

@mr.Bowtie40 3 года назад

I like the sound of that I have a 06 chevy avalanche trying to put some extra peep to it

@mr.Bowtie40 3 года назад

I will look into it ty george

@1975ssnova 2 года назад

I’m going to be installing a bar stage one in my 04 Silverado 1500 within the next couple weeks. I just got a diablosport intune i3 platinum and was messing with it yesterday and today. I highly recommend you check it out also. You can pretty much make a custom tune yourself if you know what you are doing! Also if you buy it from doable lew you get a custom tune just for your truck.

@TC-ob9we 4 года назад

Well done! Thanks!

@BoBuilds 4 года назад

Thank you!

@raymondcbaker30 10 месяцев назад

I was literally giggling at the sound of that cam... it sounds so sick!

@Large_Sarge Год назад

A god amongst men. Thanks for the amazing guide.

@arlenecarrisalez8300 3 года назад

what part of texas are you at and what do you charge to do this on a 2011 chevy silverado with a 5.3

@james10739 3 года назад

I was confused about the changing springs 2 cylinders at a time but I see without using air just having the piston keep the valves from falling

@cargotoolshop5319 2 года назад

That is correct, I like the air method better but the piston trick is fail proof

@eddiej.2354 2 года назад

WoW if I lived close by I'd have you swap my Z71 cam for something in-between stock and what was swapped as I prefer a sleeper. But Awesome Video! Awesome Step by Step! My only thing is I would have wanted my oil pump replaced as the stock unit isn't know to last. Other than that.. Thank You! 😊 Super Appreciated 😀! Eddie J. Long Island N.Y

@mydogma7116 2 года назад

After watching this I know why my mechanic charges lots, lol.. great video

@clarksgarageofbadhabits6803 3 года назад

Can’t forget about getting it retuned tho👀👀👀

@hasve978 3 года назад

I have to say if you can do that in 10 minutes I want you as my mechanic.

@irvinterry3490 Год назад

Friggin phenomenal man!!

@Z3OffGrid 2 года назад

Wow, why can"t every video just be like this. Thanks!

@jwpranzo 3 года назад

Great vid with lots of gear tips, especially using wooden dowels to hold the lifters up instead of removing the intake and taking out the lifters. But reusing the old timing gear/chain set? Why not replace them since you have it open already?

@cerberous741 3 года назад

You can't do that on this engine. This not a 350. This is a 5.3 that is ls based. You have to remove the heads to get to the lifters. I do agree that he should have changed out the timing chain but it requires removal of the oil pump which requires the oil pan to be dropped.

@iamtheoffenderofall 2 года назад

Entire job is shade tree mechanic work.

@stephenwhite5444 2 года назад

@@iamtheoffenderofall I'm sure someone who knows just enough to think they know, would think so. Nothing shade tree about it. Its excellent work.

@acehealy6102 3 года назад

so is there a 4l60 swap video after this cam one? haha

@aarons.5523 Год назад

Great video dude. Very well laid out and edited. Make more videos broddy 😎

@brandonbressman8577 2 месяца назад

That video was perfect and simple. I hope you find an extra 10mm or two! Thanks!

@morganthechevyguy 4 года назад

What are the cam specs on this one?

@shickenchits8123 3 года назад

Step 1, Clean your engine first. You don't want to take the chance of letting Any dirt in.

@TheTexican05 2 года назад

This. I’m amazed how many techs don’t do proper engine bay prep prior to internal work. Takes very little time compared to dirt and debris falling down into the motor. Valve cover removal alone will allow dirt from hoses and harnesses above to just float right down into the heads and oil areas.

@cruisingthethaiway6881 Год назад

Very dirty unprofessional work. That would not be tolerated in my shop. He would either learn very quickly how to to correctly or be fired.

@zachariahmagallan5738 Год назад

I see your pissed he is helping people save money

@shickenchits8123 Год назад

@@zachariahmagallan5738Go away troll

@JORGE4757S Год назад

@@cruisingthethaiway6881 RU-vid videos and profesional don't go in the same sentence Don't look for that here

@joedavis4389 2 года назад

10 minute cam swap, now that's some funny shit!! I watched it anyway knowing that way BS!! Good job!!

@1willubhave 3 года назад

this a great video, I seen others take the the intake out, I guess they need more room or they are just going to clean the carbon build up inside the intake, seen them take the heads off too, guess they gonna port and polish...again dunno. But this video is great-straight forward...Now just needs a tune to pair the cam to the computer...Excellant

@Cameron78998 4 года назад

I'm going to use the 5/16th wooden dowel method! But how can I be sure the lifters are all the way up? Will the dowels get stuck if one is down? Thanks

@loganterry9826 3 года назад

Yessir, if they don’t go all the way back you still have a lifter down

@streetscutlass5155 3 года назад

Wow kept it all the way professional if I was to ever do a video book you would be my number 1 tech of choice 😂

@RyGuy98_ 5 месяцев назад

The best video on this subject 👌🏼👌🏼

@OMGITSAAAJ 2 года назад

This video gets an A grade from me! (Would’ve been an A+ if you had thrown in the tiniest eensey weensey REDLINE REV!

@coreyalvarado666 3 года назад

What was the point of doing a before rev up? I really wanted to hear the difference after of the new cam besides an idle.

@patricktisdale9603 3 года назад

Great job, very good video. Top Notch!

@BoBuilds 3 года назад

Thanks man!

@generationxgarage Год назад

Mad respect doing it the truck.

@MrJAV418 3 года назад

what cam is this?

@louiscardenas6637 4 года назад

So I'm thinking of doin my 5.3. My question is the front cover, how do you make sure it's perfectly centered over the crank? Do you use the centering tool I've seen on the net? Also, is there a front main seal on the crank pulley? I need to do my rear main seal and seen vids where they use a tool to align the rear plate and get it centered. That's why I ask about the front. I've never done a cam swap but the more vids I watch,its boosting the confidence!💪 Thanks!

@johnsimun6533 2 года назад

LS or Vortex? I have the LS4, and along with this, need the dod delete.

@BoBuilds 2 года назад

The crank pulley seal would be considered the "front main seal" ive never had an issue just torquing the cover down and install pulley through seal. A quick way to center is to wait on tightening the timing cover until the crank pulled is installed through the seal then torque timing cover. Some bolts may be tricky to reach tho

@BoBuilds 2 года назад

Yeah ls4 is essentially a gen 4 aluminum 5.3

@johnsimun6533 2 года назад

Just got me a ‘06 Impala. Every once in a while, when she switches to V4 mode. I hear the dreaded tick tick tick. So I am searching for a temporary fix till the DODD. The transmission is a little rough, and suspension is a little banging, but as smooth as a impala running across the savanna full speed. Is there anything else that I need to do while I’m in there?

@rambosaurusrex449 3 года назад

You know what I originally complained about the 10 min title then I decided that was stupid. Cool video man, keep it up

@larrywilson6555 3 года назад

Dude makes it look easy

@fbrtube 3 года назад

Hey great video, I’m about to swap just about everything mentioned at 150k miles... I have a few questions just double checking here. 1: which way did you rotate cam sprocket when you were doing 45* turns? 2. Would you follow the same turning process on valve springs if you’re replacing lifters as well? Or just pull the whole cylinder? 3. Did you mean to say torque valve cover bolts to 106 lb in or 106 lb ft? Thanks for the great video - really awesome stuff.

@blueridermg 2 года назад

Something I had in mind as well. If you look at the marks he made with his fingers on sprocket you can tell which way he turned it. Hope this helps

@westcoast2797 4 года назад

A Pro tip for the future ..clean all derby before working on an engine shop vac or blow some air around the area your going to work in. Keep up the work otherwise.