LOUDER BASS in The Speaker Towers w/ 4 10" Subwoofers | Wiring Up "BIGGER" & BETTER Home Audio Subs! 

The WHOLE HOUSE is shaking!!! Time to build a bass bunker 🤣

Tinsel leads smacking the cone, my favorite flavor

Sweet u know its a good day when exo uploads

I love that little cast iron stove.

It’s amazing when you update with a better built driver it just shows you that quality counts in every form with all kinds of audio.

Those are great subs

Those Dayton Audio HO 10's are sleeper gems. I built a ported enclosure for one of them with Bash 300 watt plate amplifier for my living room. It hits slo clean and gets low with no effort. They sound way bigger than they are.

Inspiration at its finest. My new home deserves a new sound.

EXO, first time comment after years of watching... You, your content, and editing skills are addicting brother, keep doin what you're doin 👍

I just know at some point EXO is jumping into a full on home cinema build, can't wait!

30 sec into the vid and i already know that its gonna be a great video! those dayton reference drivers are really nice

Amazing to see exo still has these, even during Frankenstein episodes. Cant believe its been 10 years already.

That HK receiver has always been my favorite looking

OMG dude no way ! those speakers ,when u build them first that was why i followed u and now u bring them up again amazing to see them still bussing!!!!! i love that !

I think if I remember right this may have been the intro to my affiliation to exo wayyy back in the day. I like to say I’m a day 1er but I came in a little bit in. But still feels good to be a part of the community after all these years!

Absolutely incredible! Made a huge difference. Big fan of home audio as well. Such a great setup!

Can you make a video on the amps and how you got the low frequency crossover?

Love that your dropping consistent video's again...

Man's still using a jigsaw EVEN THOUGH HE HAS A ROUTER 😂

You are Legend.I watching you many years

A tip to keep the surrounds on the speakers from dry rotting use tire dressing it will also make them look great. I've had the same home speakers for 30 years and still look new

These speakers are what made me subscribe to your channel WAAAAY back.

I admire your professionalism and ability to make quality videos. Thank you for your hard work!👓🐥💿

What are you using to drive these bad boys? Equipment list please. Great video!

Heck yea exoooo! I actually got started into this whole audio game with a super cheap garage sale speaker setup! 4 speakers for 4 dollars. We was rattling the walls at our moms house in middle school. Love the vids exo! Keep it up🔥🔥

Nice choice. I have one of these in my truck. It's in a sealed box with about 750rms on it. Sounds really good.

I love how you think outside the box. Awesome job

Dayton Audio is my go-to brand for home audio and car audio. Love all their products. Nice work with the new subs EXO!! 💪🔥

Exo, the hotspot for base is not because of the corner but because of the further. The tower is across the living room, so it fits the next lower wavelength (we can google tables for hz vs ft). And I just loved those Daytons. Regards from Mexico.

omg i remember watching the original build video for these towers when it was just out

The paintings need sound deadening!!😂😂

You should really consider switching all your wood screws to torx drive. I've never had a torx driver cam out and stab anything.

Will someone PLEASE get this man a jasper jig ffs!!

I remember you building that tower. One thing that can be happening is the cancelation effect of the waves bouncing off walls and meeting and lower volume. I was running 2 15s and 4 12s in my loving room. And I ended up turning off the 4 12s and it was louder with just the 2 15s going. I also put the powered subs in the corners of the room

I only have 2 Dayton Audio references 10’s on 1000 watts with 4 Dayton Audio Bookshelf speakers in my bedroom. Could only imagine 4!!! lol well done Brother.

Great 👍 I really need to make my own

I've been watching your videos for a while now. I've always been curious about what Amp you use to power your home audio speakers 🔊!!!

🔥 Nice! Love your videos man

Much love, respect and appreciation for you brother

I love your videos, I never get tired of them. Keep up the great work

My guess is the glass on the door making it more extreme in that corner. I have the same situation with the home theater system I built in my house. Right by the glass door is the best spot in the house. I love it man keep it up!

@exo you need to make yourself a work bench with your routor mounted in it. youll have a whole new world of ease been watching you for years still love seeing the notification when a new videos out 😁😁

Toller Lautsprecher!👍

So happy Dayton audio got their heads in the game.

Awesome project Bruce 😊

I’ve not looked yet? But do you have a suggestion on power supply to push these in house?

Love it! Can I ask how are you powering the towers????

I had made some quality speaker pods for a motorcycle I use to have. I took out the cheap paper cone speakers and upgraded to Daytons. Sound quality went way up and could turn it up a little more. Was worth the trouble

Nice one :) How much ohms is the complete box and what amp do you use?

😁😂🤣 EXO IS THE TRUTH!!!

I just bought four of the 12" versions for my basement home theater. Should destroy everything upstairs.😂😂😂😂

With the last video you had with these there was one test song you danced to THAT I COULD NOT FOR THE LIFE OF ME TRACK DOWN!!!!!!!!

Damn those subs are really good!

Great update yo! glad to see another video on these ! I did this same trick on my boat . used Parts Express 10" max-x. Built rings just like this . went from BarleyBumpin to FiberglassShakin LOL

Pretty aweaome there Exo. Gives an idea on how to do mine here lol.

Nice choice -> I Build a 4x dual 10Inch subs with the same drivers (no car subs) And they work like a charm and I love the sound :).

Love it keep up good work watching from Indiana

Great job on content 🎉

I love the intro so much 😂😂👍👍👍👍👍

yeah a room can do that to certain frequencies. Always nice to have a reverse phase switch on both pairs. I use a digital mixer and can delay and/or flip phase on any mix output. Can always bump up the canceling frequency too. but slightly delaying one side or flipping phase will definitely change the character of how the bass is perceived in the ideal listening location. The most obvious way to change the bass characteristics is positioning, but since it it tied to your tops the position makes sense for everything above 80hz. Another option for a future design could be to mount the subs on the sides of cabinet 90º off phase or literally behind and out of phase 180º with front firing speakers and a switch to flip to 0º. Bass in big rooms is hard. I do this for a living with PA systems for concerts and all types of events. There is also simulated visualizing software for visualizing the evenness of all frequencies with realtime RTA. Look up SMAART by Rational Acoustics. Cheers bro!

Well done 😎👍

Feels good man

Nice work ❤

much love man love the vids.

Cool job every Time 👍👏👍👏👍

hey exo, fun fact making your own unique ai covers of songs using your voice or someone elses with permission will not void the copyright claims issue. therefor u can use just about anything

WOOOW IS AMAZING

The angle from the dangle still looking for my t-shirt✌️

5:27 I quote that "knockin knick knacks" line all the damn time lmaooo

What amp are you using to power those?

Dayton audio is a great brand ! my cousin had 4 12's in his car for so many years and that woofer dose a great bang for the buck i think it is the best way to go for home audio!

Dayton audio is no bullshit brand, love it 🤙

Great video

The bass is loudest there in the corner cause of loading and wave sizes. Same principles as your van build. If you want the loudest bass put your woofers where you sit for movies. Then run the meter around the room to find the peak pressure zone. Where it’s loudest is where your subs go for optimal efficiency and sound. A lot of science in home audio. My towers are more bass heavy than my subwoofer itself. Go klipsh lol. We need a doggie video!!!!

I love it!😆

Awesome. I have always been a vega 3 way . 12s and 15s for home audio.

Looks like an investment in crazy glue will be needed soon 🤣👊🏻

You are the best!!

I had some GRS speakers that made a nice scrapy noise past a certain level of excursion. When i took them apart i found the bottom of the former had collapsed and bent a bit from bumping back plate. Coil was good

now we talking this is what i like :D

Those baskets and markets on the Dayton woofers look a lot like the old school Fosgate Power series woofers.

Wish i could build speakers like you :)

Crown XLI AMPS? Excellent choice for serious power on a lower budget! Id implore you to rethink the cabinet design however; Start with one sub on top, then 2 midbass drivers. In the middle put your MTM setup, follow that with the other 2 midbass drivers below and end with the 2nd sub on bottom. Look up Dunlavy/Duntech speakers to get a better idea of what I mean.

time to second skin the knick knacks and put some metal bars behind your drywall. Fellow home shaker here... running 1900rms into a 13cuft ported sonotube and 15" sub....

Cool swap, nicely done! The Dayton Designer Series have the exact same basket and magnet as the SKAR DDX Series, but SKAR's are cheaper.

Can’t believe it’s been 10 years bro

3:07 You should make your self some dust covers for them. I would always prefer to have them just because cleaning them are much easier and I do not have to worry about dust building up on the speakers themselves.

I miss doing stuff like this.

My "living room" setup is a couple gutted infinity Kappa 3 boxes, with 10 inch Sonys from like 1995 (SU-602 I think). Basic OSB adapters to fit the 12 inch holes. Driven off a Pyle Pro PT2000 I pulled from a college dorm dumpster. Somebody spilled coke on it; I just had to clean it and let it dry. That's just for the lows. Mids and highs are driven off a receiver I gutted to be a rock dumb amp. Mids are Klipsch KSB 3.1 with their screeching tweeters and crossovers removed. Highs are from a 1994 Buick Park Avenue with their basic high pass capacitor. PC software handles the crossover settings between lows and mids and sends those to 2 separate DACs. Voice Meeeter Banana is some useful free software.

I remember probably like 15 years ago I was 15 at the time and I had a collection of house speakers from people getting rid of them or just giving them to me. I had a bunch. I had 6 15in technics subs. 2 stacked on both sides of my tv I had another 2 15in technics by the head of my bed. 2 planet audio 10s at the foot of my bed. 2 8 inch bose under my TV and between all of the regular home audio enclosures 16+ mids and highs. And to kick it all off. A 18 inch concert speaker from a dj that was getting rid of his old equipment. I wish I still had most of it. Or a way to actually measure the dB back in those days lol. I didn't have anything that wasn't glued down in my room or it wouldn't stay in place. The popcorn from my popcorn ceiling would just snow on us if I had it up to much. I broke 2 mirrors 1 in my bathroom and one on the other side of the trailer. And countless nicnacks lol. Finally I was forced to down grade since I kept breaking stuff lol.all I have now is a cheap onn 36in soundbar and the sub that came with it I ended up accidentally breaking. So I took the Bluetooth guts out and glued them to the back of the last 15 I had so now I only use it for movies and such. Everything else is in my car. I don't have alot of money so I don't have anything fancy just a triple 8 scar audio box and a kicker comp r 12 paired with a power acoustik 2500w Amp turned on max. 2 scar loud speaker mid 6x5s in the rear deck lid. And 2 kenwood components in the front doors all powered by a tiny 600w cheap amp. I Had a 4500 watt power acoustic EG1-4500D for the 8s and 12 But I bought it second hand and it overheated and caught on fire and when I went to get it repaired my warranty was out. Waiting for the day the 2500w does but it's holding in really really strong. One day I'll do a custom box and upgrade some stuff.

I use a single ref 10 in a beefy ported box and its awesome. It hits low with authority. Powered with 950 watts. I bought 4 woofers and the single one sounds f ing great on its own and any more would be too much for the room

let's go exo!!!

Yuh issa boss🔊🔊🔊🔊🎶🎶🎶💥💥💥🔥🔥🔥💯💯💯💯🇹🇹🇹🇹🇹🇹🇹🇹

I need those old 12” woofers man

Hey exo, I remember when you made these a while back I got a buddy getting into hifi audio do you have a build plan for these still? Any changes you would have made had you done it again? Keep it up buddy

When you are measuring the db, what weighting are you measuring in, a, b, or c weighting. Also it’s normal for a lot of rooms to get slot more bass in a corner like that.

When making deep or through-cuts with the router, do it in a few passes, rather than one pass to prevent dulling bits and burning the wood.

I like using car audio subs for home audio :) Great for listening to music and playing video games that have a lot of music.

Hey exo, I've been watching your videos for quite a few years now. Absolutely love your channel and your enthusiasm about everything you do. I've been doing custom enclosures "professionally" for a few months now, and am struggling to get enough information together about series ported 6th order designs to know how to design one on paper, graph it out, and then build and test it. Would you have any advice or be willing to pm me and have a discussion about the acoustical physics behind coupled cavity designs?

Tip. Look how JR Research finishes the inner parts of a speaker cabinet. You wil get much beter sound.