Low Cost Siglent Oscilloscopes SDS1104X-E vs SDS1202X

Подписаться 31 тыс.

Просмотров 22 тыс.

50% 1

In this video 'Low Cost Siglent Oscilloscopes SDS1104X-E vs SDS1202X', I'll compare the SDS1104X-E 4 channel scope next to the SDS1202X 2 channel scope. The X-E series replaced the X series, but you might still find good deals on the X series, so I wanted to show the differences side by side.
Siglent 1104X-E shown in this video: amzn.to/3y53MQz
Siglent 1202X-E (200 MHz 2 Ch version - lower cost): amzn.to/3vbGBlK
Link to T-Shirts and more: www.redbubble.com/people/kissa...
Please use links that cost nothing extra but will help support the channel:
TPA3255 Power Amplifier board: amzn.to/3LgRZTl
GW Instek 4 channel MDO Oscilloscope: amzn.to/3rvY7PK
MicSig Oscilloscope: amzn.to/3B4DcXe
MicSig Differential Scope Probe: amzn.to/3HvRG4A
Pico Oscilloscope: amzn.to/35UytvC
IR Thermal Camera: amzn.to/3J92LJu
Silicone Blue work mat: amzn.to/37a9txL
Kaiweets Store (using this link will help support this channel): kaiweets.com/collections/hot-...
Other videos that might be of interest:
EEVblog Comments on Fluke Rant: • Capacitor Types in SPI...
Fluke Rant - Are they over priced? • Fluke Rant - are they ...
Fluke Rant - Better Test Leads Please; • Fluke Rant - Better Te...
Fluke TPAK Hanging meter Kit $42 or $10; magnetic hanger comparison: • Fluke TPAK Hanging met...
EEVblog is Santa Claus - Thanks Dave!!: • EEVblog is Santa Claus...
EEVblog comments;) Fluke Rant - are they Over Priced?: • EEVblog comments;) Fl...
The Iconic Fluke 87V: • The Iconic FLUKE 87 wi...
Fluke 27 Exposed and giveaway: • Fluke 27 Exposed and G...
Please support this channel that will not cost anything extra by using my link to Borbede BD-99, this meter is around $47 which is low cost for a high count meter with high accuracy:
amzn.to/3DRgUbZ
Links to support this channel that cost nothing extra;)
Fluke 87V link: amzn.to/3l4QUCq
Hioki 4256 multimeter: amzn.to/3idmexS
Hioki 4282 multimeter (my favorite meter): amzn.to/3xjwGYN
Testo 760-2 Multimeter (on Sale): amzn.to/38PQE4H
Amazon Commercial 90DM610 Multimeter: amzn.to/2XOO4pf
Redfish Clamp-on Power meter: redfishinstruments.com/produc...
Kaiweets: kaiweets.com?sca_ref=1269738.glN6S8aePH
TDA8954 Class D amplifier: amzn.to/2LBqvxF
100Picoscope 4444 (differential scope kit): amzn.to/2V4sRK0
GW Instek MDO-2204EX (has Generator, Power Supply, and Multimeter):amzn.to/3xmCQYa
Micsig Differential Probe: amzn.to/3oUDtVu
Micsig Current Probe: amzn.to/3nRso6v
Hantek Current Probe (low cost): amzn.to/3qrbVHH
PinTek Differential Probe: amzn.to/39SWqlt
Uni-T 2-Channel ARB Generator: amzn.to/3iibBs5
_________________________________________________________________________________________
You can support this channel with this link to Patreon - I really do appreciate your support? This support helps me purchase the equipment I use for testing a reviews.
Patreon.com/KissAnalog
Or you can support this channel with a one time donation on PayPal at: KissAnalog@gmail.com
__________________________________________________________________________________________

Наука

Опубликовано:

22 апр 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 75

@sparkyskinner4729 2 года назад

Great review. Nice to see the options compared apples for apples. You hit on an important aspect of these firm ware driven scopes dealing with the updates and bug corrections. Thanks Kiss Analog

@KissAnalog 2 года назад

Thanks so much Sparky;)

@charlesbonkley Год назад

Thank you for the quality demonstration and video. Every year, when the sales come around, I waffle back and forth, on whether I not I want/need one of these scopes to "replace" my bad ass yet old school Fluke Combiscope PM3370A mainly for the desktop savings. Because of that I'm leaning towards the 1202X-E because it seems like a SOLID upgrade for a 2-channel scope. Even in the limited troubleshooting of digital circuits I occasionally find myself in, I don't know if I'd ever need the 4 channels, though I think about it! I'd hate to retire the old gal; the Combiscope does allow me to relive the nostalgia of my old college lab days!

@raindropsrising7662 Год назад

Watched this for the 5th time. Just received my SDS1104X-E. Truly appreciate your review. Extremely helpful.

@KissAnalog Год назад

Thank you for your feedback!

@charlesbonkley Год назад

What made you go with the 1104? Do you find yourself needing 4 channels at once for what you do?

@RicardoPenders 2 года назад

Always worth watching your videos Eddie

@KissAnalog 2 года назад

Thanks so much! I appreciate you!

@versace885 2 года назад

Hi Eddie, thank you for the informative video.

@KissAnalog 2 года назад

Thanks so much!

@doglucky1709 2 года назад

There is CRT [cathode-ray tube] to LCD monitor since where significant things, so I wish buying to have, too. Great review, thank you!

@KissAnalog 2 года назад

Thanks so much! I appreciate you!

@mrpetit2 2 года назад

To use the bode plot function on the SDS1104X-E you don't need the specific little awg/signal generator (SAG1021I) that you control with the scope, but you can use any siglent signal generator that starts with the letters 'SDG'. Extra software options are also not needed. You used to have a Siglent SDG810 on your bench I believe. I don't know if you still have it, but if you do, you could make a short video about it; it works really nice and it's a method to have a system that can do bode plots for about under $800 which is always a good deal. (with programming and a computer inbetween people have made the bode plot feature working with other signal generators) I also believe the SDS1202X doesn't have a web interface. Of course you can control it from software, but the SDS1104X-E you can control from your browser. Handy for people that don't use windows or don't want to install large software packeages.

@KissAnalog 2 года назад

Thanks so much for the great feedback! That is a low cost option for running Bode Plots;) I did give my Siglent AWG to a viewer/friend of the channel;) I appreciate the valuable information!

@erikas6874 2 года назад

Yes. My SDG1010 works fine with the SDS1104X-E (well, now SDS1204X-E as these models have exactly the same hardware. It's an easy fix to "upgrade" SDS1104X-E to SDS1204X-E, all options enabled, via just a web browser and the internal webserver, and a special python script). If considering buying a new scope, the 4 channel has a lot more features in the recent released firmware than the two channel. Also with respect to FFT. It's looks like that Siglent has abandoned the 1202X-E, as it very well could have the same FFT performance and logging features as the 4 channel versions.

@DaSmik101 Год назад

@@erikas6874 can you point me in the right direction on how I could do that please? I am looking to get the 100MHz one and upgrade it to 200MHz

@erikas6874 Год назад

@@DaSmik101 Yes I can. First of all connect your scope via Ethernet and connect to it via a browser. Then on the start page (of your scope's webserver), there is a SCPI option, where you can enter the following command: SCOPEID? Then comment here with the answer from the scope, as well as the scope's serial number. And I can help you out with keys to enter manually.

@anticapitalize Год назад

The firmware is different because the 02 and 04 scopes run completely different operating systems underneath as revealed on the Siglent firmware updates page.

@KissAnalog Год назад

Thanks for that feedback! It is too bad that the X-E didn't follow some of the operation features.

@tomaszwota1465 2 года назад

I don't use it in any professional manner, but I really enjoy my 1104x-e. Of course I also enjoy my analog scope. ;)

@KissAnalog 2 года назад

Thanks for the feedback! It is all about having fun - and sometimes getting work done;) Which analog scope do you have?

@tomaszwota1465 2 года назад

@@KissAnalog Fluke PM3370B 60MHz 2ch combiscope, which is pretty nice because UI is done through soft pushbuttons and rotary encoders and it's an analog + digital scope. And (Rohde & Schwarz? It says so on the top of it) Telequipment D67, which is a 25MHz 2ch dual timebase full analog with this awesome old school (hardware) UI, coaxial knobs that you can pull out for free running mode, fine tuning or x5 gain, big rotary switches with Vernier controls, hardware switches and all. Both weigh a ton, but they are fun to use. Rotary encoder handling in that Fluke is really nice, at times I think better than Siglent (they nailed the speed/acceleration algorithm IMO, and the whole onscreen UI feels _really_ snappy). Bbbbbut truly, having a heavy, clicky, rotary switch and those coaxial knobs... Can't beat that feeling of operating an actual machine!

@KissAnalog 2 года назад

I know what you mean. The mechanical switches and rotary knobs in nice equipment does add a nice feel;)

@rdormer 2 года назад

Just got the 1104X-E myself. This video is giving me just a little bit of buyer's remose now that I know I could have gotten a bigger screen. Not giving me buyer's remorse - four channel, dual ADCs, and "upgradable" bandwidth. The biggest fail with the firmware is that they won't let you make the bloody menu space go away. It would be absolutely delightful if you could just hit a button and have the reticle / graph cover the entire screen. It would certainly make up for the smaller size. That said, I still consider it money well spent, Siglent makes a quality scope.

@KissAnalog 2 года назад

Great feedback! And your made a great choice. I totally agree about the option to make the screen bigger getting rid of the buttons below;) This scope will be fun to use and very powerful! I’ve done some videos showing how to use the FFT although the options on this one is a bit different - the power of the FFT is amazing!

@baguettebaguetteneverforge1758 Год назад

@@KissAnalog would you rather get the GW Instek GDS-1054B over the 1104X-E? I am looking for a scope as a ee student was wondering if I could get some advice

@340dave Год назад

Question: I want to do testing on various battery chargers, measuring amperage, voltage, frequency, while they are hooked up to a battery, and monitor the progress over a period of time, say a week. What should I look for in a oscillscope? I don't have much more application other than I am a ham radio nut. Any recommendations? Thanks

@anticapitalize Год назад

It sounds like you just need a simple data logging multimeter or two, not an oscope.

@340dave Год назад

@@anticapitalize Thanks for responding to me. More specifically, monitor the pulse of several battery chargers used to 'desulfate' 12vdc batteries (intensity, frequency ((both timeline and in Hz))) If that could done with a data logging meter and a laptop, that would be great.

@johnnyshinnichi1785 5 месяцев назад

How could anyone who would have the selection moving from button to button like that ever get a job in programming? And what about the person overseeing the project, or the testers, didn't they pick up on this?

@KissAnalog 5 месяцев назад

I agree - this should have been caught - especially when the better firmware in the earlier series (SDS1202X) had already been designed. It is strange that they started over and went backwards. The FFT window is also a step backwards.

@JasonLeaman 2 года назад

Eddie, are you going to install the 1104 unlock to get it to 200mhz ?

@KissAnalog 2 года назад

The 1104 isn’t my scope;). The 1202x is my scope - and I wish I could turn on the generator;)

@JasonsLabVideos 2 года назад

@@KissAnalog I've been thinking about selling all my Siglent stuff Scope Function gen Bench meter etc etc..

@BeefIngot 7 месяцев назад

I bet there is a chance that the complaint about not auto selecting on timeout could be fixed if complained about.

@KissAnalog 7 месяцев назад

Thanks for bring this up. My scope no - there is no more support or updates - even though I asked to correct a bug. Scopes that are still being sold - I would hope so...;)

@PetrSedlacek Год назад

OK, so a discontinued older scope has better firmware than the new and "improved" one :/ I'm most probably going to pick up the SDS1104X-E anyway as there isn't anything better around this price.

@KissAnalog Год назад

They are both great scopes! I like mine better, and I think the reason the firmware is different is that they had different designers. Very similar but different;) I think you will be happy with it. The SDS1104X-E is on sale at a fantastic price: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EynJiLZVeR4.html

@jstro-hobbytech 2 года назад

I'm gonna go for the x-e 4 chan. Just over 700 on Amazon. What do ya say man?

@KissAnalog 2 года назад

It sounds like you got a good deal! Let us know how you like it;)

@jstro-hobbytech 2 года назад

@@KissAnalog I got the 2gsa 2 chan but all is well haha

@arfer1470 2 года назад

Sounds like Pico wins, I am thinking about the Picoscope 4444 for its diff inputs and higher res, just concerned about having a PC in the test set up as I have had problems before using a PC with my HP8903 distortion analyser and having it introduce noise. Have you seen any noise issues like this? I suppose it is dependant on the PC to some extent, probably better with a laptop on battery!

@KissAnalog 2 года назад

Pico is more expensive, but it does offer a lot and compares more to the very expensive brand names. I don't thin the PC adds any noise. I do use a laptop and the Pico can be powered by just the USB, or by the aux power input.

@snabelsvin1 2 года назад

I’m of course biased too since i have the 1104X-E, but I would choose it any day over the 1202X. I’ll give you my two cents where i disagree. 6:16 The date of calibration and the equipment used is listed on the calibration certificate. Mine was calibrated by Yan Wang on 15/12-21. 13:43 Do you have the newest firmware installed? Mine shows the illustration of how the trigger works when you press the type button first time. and why would one care in the first place. Don’t you press to change the type anyway? 16:50 In the upper right corner it shows you the slope. I think it’s nice all the important settings shows together and you don’t need to go through all the menus to see them. And if in doubt you just hold down the buttons and it’l even tell you what the given function does. 17:30 The display isn’t small. It’s the size of most scopes in this class and price range. 21:00 I have poor eye sight and i have no problem reading anything on the screen. 28:30 The only reason to get the SDS1104X-E? No! For about 120$ more (prices found on tequipment) you get double the channels, double ADC’s at 1Gs/s and 14Mpts, you can easily hack it to 200Mhz and all the options (AWG and bode plot functionality, MSO capability, WIFI capability). It has 1Mpt FFT vs only 16kpts. It has free serial decode. Two USB ports. The playback function is very useful - you don’t have to endlessly turn the multifunction knob to get to the point on the wave you want to see. 30:47 You complain that you have to press to many buttons to navigate the menus in the 1104X-E, but as you show the utility menus, the 1202x has a parameter missing where the “hole” to the right of the “do self test” is missing. They could move one from the second page there. only two pages is needed, but you have three. My 1104X-E utilises every space on all 4 pages. I don’t think you have the latest firmware, because yours doesn’t. Either way, the 1104X-E is not discontinued, and and they will continue improving the software. I might even write them about the probe divider issue and only because you mentioned it.

@KissAnalog 2 года назад

Thanks for the great feedback! I don't think we disagree - I didn't mean to sound like I don't like the SDS1104X-E. Let me respond to each of your comments here. Calibration - I know they are both calibrated, but it just didn’t show up on the back of the unit as mine did. No big deal:) I do like these Siglent scopes. I just wanted to show these side by side in case someone has the option to buy. Mine does have the latest and last, but I don’t know about the SDS104X-E. I did show what version it had on the screen. Since the X-E model came after, I don’t know why the firmware would be less or not as complete. I just like how mine (the X) model shows the icons for the trigger next to the word without having to hit another button. The X-E display is larger than the older scopes as I said - but the 8” on my model is just that much easier to see. I don’t know why they would go back to the smaller 7” except that they were trying to cut costs. That’s also why they took away the 50 ohm input impedance option. When I said the only reason to get the X-E was for the w1Mpt FFT, you are right - I did forget about the 4 channel option. You might be able to hack it to get the 200MHz and MSO capability - but neither scope can get the AWG to work. It is simply not available as it was first expected to. That’s why they came out with the external AWG to work with the Bode analyzer. Also, I don’t think the WiFi can be made to work either. They came up with a WiFi stick to do this. The free serial decode has always worked on both series. The Playback is available on both in soft buttons that I showed in the video. As I mentioned before, the version of the X-E I used in the video did take extra button pushes that the X did not. Again I don’t know why the newer scope wouldn’t start off with the same firmware and improve form there. Maybe they were in a rush to get it to market. I would test every function as I didn’t find the bugs in mine until it was too late. Once they discontinue it they stop supporting it, so no more software updates :(

@NeverTalkToCops1 2 года назад

1104: $500 1204: $775 Your math is way off. Plus why mention calibration and who did it? Eff Yan Wang.

@dwmorris Год назад

@@KissAnalog Yes the WiFi in the 1104X-E does work once enabled via purchase or hack. It requires a $15 USB WiFI dongle, I use one from TP-Link. It works great for viewing and controlling the scope from a web browser. Also, as someone else mentioned, these scopes have different base operating systems, so the firmware would have had to be ported and/or rewritten. I imagine a lot of the code was reusable, but some not, and they likely make some concessions for things like screen real estate too. They also release firmware updates for this series fairly frequently, around 2-3 times per year, but seem to have slowed down now that it has matured. Last update was in May 2022.

@TheBionicbone Год назад

@@dwmorris looks like there's a new update Jan 23, but no release notes 😮

@jstro-hobbytech 2 года назад

You can still get that on Amazon I think. Amazon is turning into eBay before there were rules though lol Eddie I think the wave gen add on comes in a little usb box that you plug into the newer one. Kensington lock my friend and you're right. They've been around for god knows how long because in high-school 25 years (ugh) ago we had them in our computer lab attached to the desk on a key chain. Makes no sense lol I can understand your nitpicking. A scope to you is like a guitar to me.

@KissAnalog 2 года назад

Thanks for the great feedback Joey! Great to have you here!

@XtianApi 11 месяцев назад

Not sure what the 1202x with no e is, but now they are all e's. Mine is the 1204x-e

@KissAnalog 11 месяцев назад

Yes you are correct, the -E has taken the place of the non-E. I like the non-E better, but that is the one I have. The firmware is a bit janky compared to the non-E, but then if you have an E version than you wouldn't know the difference. I am not happy that Siglent does not support their older equipment.

@andrewverran3498 8 месяцев назад

E has SBus

@XtianApi 8 месяцев назад

@@KissAnalog yeah, cost of affordability I suppose. Thank you sir. Love the channel

@XtianApi 8 месяцев назад

@@andrewverran3498 nice. Which matters for me with the occasional racing drone repair. Thank you!

@jstro-hobbytech 2 года назад

Looks like you're in a school hallway using a lunch table.

@KissAnalog 2 года назад

LOL I was in a lab where I had access to this other Siglent scope.

@jstro-hobbytech 2 года назад

@@KissAnalog haha I figured that. Some place with cool gear and the only things decorating the walls is ohs bs. Lol

@ahmedsaid-nk7os Год назад

Can you give me any osc pls im live in more poor countre i need this to study and work pls give me any osc🙏

@frankl1955 2 года назад

I would never buy another siglent scope again after they sold scopes for almost a year after knowing they had defective compensation circuits

@KissAnalog 2 года назад

Thanks Frank! Are you referring to the issue I had, or was there something else? I am disappointed that they wont consider putting out a firmware update to correct defects.

@NeverTalkToCops1 2 года назад

Why even mention "hacking" these scopes? Tons of people say you can. They can't prove it conclusively. All of the "hacking" info on the web is years old.

@KissAnalog 2 года назад

Thanks for the great question. I don’t like to show how to hack a scope - I feel like I’m showing how to cheat the system. If an owner of a scope does, then all the power to them but I don’t think I should advertise how to do that.

@paul_gd 2 года назад

Still works as of now.

@sneedmyseedsnogger 2 года назад

@@KissAnalog >how to cheat the system isnt that what life is all about?

@dwmorris Год назад

What do you mean "can't prove it?" Everyone is hacking these things. These scope mfgs know people do it -- the company reps hang out on the same forums (e.g. eevBlog) that people discuss how to do it openly and in depth. They don't care -- if they did they'd have encrypted or otherwise made it impossible years ago, and they just don't. Most of these digital scopes from within a single family can be hacked, certainly Siglent and Rigol. The day I got them I upgraded my 1104X-E to a 1204X-E with WiFi, decoding, and MSO enabled (ofc MSO requires a $600 adapter to use it, so meh). Likewise my 3303X-E bench power supply was upgraded to a 3303X for the increased precision.

@stevengreen9263 Год назад

You definitely still can, I just installed all the options for my new 1104X-E. The keygen algorithm was reverse engineered, so you don't even really need to "hack" it. You just need to use a script to generate your keys and input them the same way you would if you had bought them.

@ernestb.2377 11 месяцев назад

These reviews are just waste of time. Full 40+ minutes filled with almost nothing at all. "This scope has button here and this scope has button here...." OMG. I wander what are you using these scopes for anyway? Does not sound like an EE. Sorry for the "trash talk" but I am just frustrated that these day everybody is exposing themselves on the media... and yeah... okay.

@KissAnalog 11 месяцев назад

Sorry you didn't like it. There are a lot of people that want to know the difference between these two models - as they differ only by an 'E' in their part number. Also, there are a lot of people that are trying to learn how to use an oscilloscope. What is it that you want to see? You appologize for 'trash talk' but you do not provide any useful information in what you are looking for. So why apologize if you are only here to 'trash talk'? Don't expose yourself if you don't want to. Have you seen my videos on Deep memory and/or FFT? I have a number of them on those topics. I can teach about any level of Scope use - so you only have to provide positive feedback and ask. Simple as that. Here's one on deep memory. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cZijqSDTLJw.html

@ernestb.2377 11 месяцев назад

@KissAnalog Once again sorry. And why I am sorry? Nobody force me to watch your videos. It was a moment of frustration where I see that a lot of video content makers just have a very superficial knowledge and are not able to do a real review of a product beyond talking about the color of the buttons. Once again if you have enough people to watch enjoy. People who want to know more will look elsewhere or review the d..n thing at home. Good luck.

@KissAnalog 10 месяцев назад

Thanks - again - this was not a review but a comparison between two models. As I pointed out I have many more more in depth videos as the one I provided the link. I challenge you to find a review that goes as in depth as my other videos. Keep looking and let me know when you find one.

@ernestb.2377 10 месяцев назад

@@KissAnalog Thanks but no thanks. This channel is not for me. Good luck.