LOWER YOUR M3! BMW F80 M3 BILSTEIN B16 COILOVER INSTALL, with DAMPTRONIC (F80 M3, & F82 M4)

Подписаться 305 тыс.

Просмотров 89 тыс.

50% 1

😎 ---- Get your BILSTEIN B16 COILOVERS here :
www.kiesmotors...
😎 ---- Get your SPINDLE SPREADER TOOL here :
www.kiesmotors...
Here are some helpful tools: www.amazon.com...
Hey Everyone,
In today's video, we're going to show you how to take your M3/M4 from monster truck, to race car, by adding the best suspension on the market.. Bilstein.
From the factory, the F80 and F82 are incredible cars, but for whatever reason, the front of these cars looks like it has a lift kit. By adding the Bilstein B16 coilovers, we're not only going to correct that issue, but we're also going to tigheten up the suspension to improve handling.
The kit we're installing is fully integrated into the car's electronic suspension system, so by utilizing this kit, you'll still be able to electronically switch between sport and comfort modes!
Here's a link to the Bilstein B16 Coilovers: www.kiesmotors...
Here are some helpful tools: www.amazon.com...
Please use the following torque specs at your own risk. We always encourage you to double-check everything before starting the project.
Front Suspension:
Carbon Strut Brace: 28 NM
Aluminum Brace E-Torx Bolts: 25 ft.lbs.
Aluminum Brace E-Torx Bolts (Two end ones in the round piece): 30 ft.lbs.
Aluminum Brace Cowl Bolts: 56NM + 90 degrees of rotation
Strut Hat Bolts - 30NM plus 90 degrees of rotation
Strut Spindle Nut - 30NM plus 90 degrees of rotation
Strut Pinch Bolts -60 ft.lbs.
Sway Bar End Links - 28NM
Rear Suspension:
Lower Strut Bolt: 100NM Plus 90 Degrees of Rotation
Eccentric Bolt (Camber Adjustment Bolt) 165NM
Wheel Torque: 105 FT/LB
Thanks for watching and please try everything at your own risk. If you’re interested in professional installation by Kies Motorsports, please click here: www.kiesmotors...
ALSO, Scroll Down ⬇️ for:
🏎 BRYAN’s BUILD
📬 Kies Contact Info
📽 Kies Motorsports Video Playlists
🛠 Recommended Tools, Gear, and EXCLUSIVE Kies Partner Deals!
🌎 And More!
Bryan
Bryan Kiefer
President
Kies Motorsports, LLC
Hammonton, NJ
Info@kiesmotorsports.com
www.KiesMotorsports.com
Authorized Dealers and Installers of: ProTuningFreaks BootMod3, BimmerTech, AWE Tuning, Evolution Racewerks, CSF, Pure Turbos, Fuel-it, Studio RSR Roll Cages, MST Performance, Burger Motorsports, VRSF, Bilstein, H&R, Injen, Borla, Dinan, GoFastBits, Depo, VMR Wheels, BBS, Sparco, Snow Performance, Nitrous Express, AFE, Akrapovic, Eibach, Hawk, Fifteen52, Koni, KW, Seibon, Stop Tech, Vorsteiner, Wagner Tuning, Wilwood, and many more incredible brands!
🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎
BRYAN’s BUILD 👇🏼👇🏼
Click Here to see links to EVERY PART on Bryan’s Build! 👉🏼 www.kiesmotors... 👈🏼
📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬
Contact:
Website: 🌎 www.kiesmotorsports.com 🌏
Contact: 📩 Info@kiesmotorsports.com 📩
Instagram: 📸 www.instagram.... 📸
Facebook: www.facebook.c...
DRIVETRIBE: 🚔 drivetribe.com... 🚔
Twitter 🐦 Ki... 🐦
📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽
Click below for Playlists of Kies Motorsports videos that will cover Performance, Aesthetics, Retrofits, and even Vlogs!
Click here for ALL of our Playlists!: 📽 bit.ly/KiesPlay... 📽
🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠
Click here for Tools, Camera Gear, and Exclusive Partner Deals!
Tools, Camera Gear and More! www.amazon.com...
Exclusive Partner Deals: www.kiesmotors...
🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰
Special announcement! ProAutoMotion is now a part of Kies Motorsports! Find all the ProAutoMotion products you love at www.kiesmotorsports.com

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 65

@TommyLGarage 4 года назад

Finally a proper set of real coilovers with EDC

@CHEDDARANDWAFFLES 3 года назад

@tommy would you recommend these? or the ohlins? i am at 64k miles and do track days once a quarter. 8 max per year. Or would you recommend to simply install the shocks from bilstein?

@karlxu782 3 года назад

@@CHEDDARANDWAFFLES got the same question, I am comparing Ohlins DFV vs Bilstein B16 and Nitron R1 for my m2c. also 85%daili +15%track day

@kaisarsosae 4 года назад

Excellent breakdown, can't wait to hear your review of this setup after a few twisty drives.

@trooper_f30 4 года назад

Did these coils on ur f30 make it handle better than the f80 stock?

@fabulousprofound 4 года назад

why did bmw set the stock height so high in the front?

@AngieMeadKing 3 года назад

This is the second video of yours that has been super helpful with my M4.

@rhenzlemuel09 2 года назад

How's the ride experience so far?

@millenium7307 4 года назад

It looks like it's a BILSTEIN B14. There is no stiffness adjustment.

@KiesMotorsports 4 года назад

These b16s are fully integrated with the car, so you can control them with the different modes in the car: www.kiesmotorsports.com/products/bilstein-b16-damptronic-2015-2018-bmw-m3-m4-f80-f82-front-rear-performance-suspension-system?_pos=1&_sid=ee67cfcdb&_ss=r

@peterkukolik8402 3 года назад

@@KiesMotorsports No wheel spacers needed wor the sotck rims?

@carsandcoldbrew6489 3 года назад

What other suspension parts are recommended when putting on these coilovers, or are the Bilsteins enough?

@chards82 4 года назад

Great video, any update of when part 2 will be uploaded? I would like to get these coilovers for my M4 and I am waiting for your review before I pull the trigger.

@anshus2395 4 года назад

I don't even have an F80, but I love watching your DIY's lol. When you adjust the ride height on the rears, will you have to drop the control arm all over again? On my F30 with B14's I was told you can't adjust ride height without dropping the control arm and I don't understand why.

@Kid_Ellipsis 4 года назад

Anshu S you’ll find that with adjustable spring collars the BMW rear spring upper cup just spins against the chassis when you try to turn the threaded collar. This is why it may be necessary to drop the lower control arm again to make that adjustment. Some people have found that a thin C-clamp on the upper cup gives you enough leverage to prevent it from spinning.

@chrflo 4 года назад

If you exclude the EDC (I have an M2C :P) what are your thoughts on Bilstein vs Ohlins? Thx :)

@TheBadMaskSinger 4 года назад

Do you have to disconnect the battery when your changing out a edc shock/strut. And get it reprogrammed?

@CHEDDARANDWAFFLES 3 года назад

Thank you! I have watched this 100 times to install my Kw DDC. You just saved me $1700!!!!!

@suprafan2jz 4 года назад

What was that intro song? Great video as always! Need to do some coilovers on my 335 asap!

@NewDesignVinylGraphics 4 года назад

suprafan2jz such a neat tune lol

@JakeBM4 5 месяцев назад

Quick question, doing mine next weekend. Can you do the fronts without removing the strut tops aswell? Just brace the hub and undo from the top? Also can you not reuse the front nut for the strut tops, its mentioned this is replaced? I dont have replacement 22mm nuts. Thanks

@hugocorrea8426 3 года назад

Amazing video brother! The attention to detail and meticulousness is what sets you apart from the competition. I need that torque wrench! You have gained another subscriber. Very well done 👏👏👏

@gezed 4 года назад

aren't the rear bushings(strut and outer LCA) ball joints? If they are, do they still need to be loaded before torquing down?

@raldyjimenez3319 2 года назад

Hi...will this Bilstein B16 coil-over fit my 2019 440i Grand Coupe XDrive if not what do you recommend, please.

@stevend1514 Год назад

Is there a reason for the spring compressor and removing the whole top hat? Some DIY have you remove the center nut and just drop the strut down that way

@wannagofasterz6529 4 года назад

They look good! It has been a couple of months since the installation, is there a follow up video coming? 😁

@hevendranarayansamy2793 4 года назад

That drop looks perfect. Also I like how plug and play this bilstein kit is. Well done

@lindseypearson8139 4 года назад

Is that an individual color or Imola red?

@jg_media9 4 года назад

Definitely trying this at home.. lol jk

@seank2793 4 года назад

Could you suggest me good one for my 2016 340xi? Thanks!

@medogabr9952 4 года назад

We have the same car bro ive been looking at this set and kw

@jonnellas7680 2 года назад

Any suggestions the best way to adjust lift the rear springs?

@daphoosa 4 года назад

Going to do corner balancing as well?

@josephmgomez3921 9 месяцев назад

Are these better than BC Racing Coilovers?

@brandonwatts5667 4 года назад

Hey Brian, can I use a 16mm wrench (not a pass through) and a T30 torx on a separate wrench to tighten/loosen the sway bar or do I need a pass through wrench only? I installed lowering springs and am now getting a clunking noise. I think it’s because I couldn’t tighten the sway bar 100% as I only had a t25 torx

@karlxu782 3 года назад

Could you do some review on those suspension? in term of ride quality, compare with stock and let's say, the famous kw v3. I heard this one is more like a huge improvement based on the stock feel, other than chancing the characteristic to feel "like a different car" . That sounds like a good fit for an occasionally tracked daily car. Will you recommend Ohlins DFV over this ?

@chrisd2415 2 года назад

Hi great video, do you have to lower by as much as the figures you quoted in the video, I’d love this set up but in the UK we have some nasty speed bumps Cheers

@TheBigDubovsky 3 года назад

Nice video, just wondering, did you replace any of the nuts and bolts when doing the suspension indexing? BMW parts said not all bolts have to be replaced, but a bunch of the suspension nuts do. Online it says either to replace every nut and bolt that’s loosened or no need to replace, so confused on which approach to take. Thanks!

@SickCrisp 4 года назад

Those top hats look insane!

@audioMeth 4 года назад

what's the torque specs for the e torx bolts and top nut on the rear shock? EDIT: rear e torx 28nm rear strut top nut 38nm

@tuncyucel7896 4 года назад

Need spacers ASAP

@deborahsuegraham3352 2 года назад

Can we do a transmission flush on a 535i

@waqidj 3 года назад

if you were in Texas / houston I would just bring the car to you and let you go crazy haha. thanks for the video. this just goes to show you that a good mechanic is needed.

@jaimevillalobos8777 4 года назад

When is the next video

@alfredasfour7870 4 года назад

Did you follow the measurements for the spring height adjustment specified in the instruction manual? I did the same install and my rear only dropped 1cm compared to the stock ride height.