Lowered Redline Moon Eyes Bone Shaker - Custom Hot Wheels

Подписаться 26 тыс.

Просмотров 1,9 тыс.

50% 1

Hot Wheels Bone Shaker - Redline Conversion / Chassis Replacement - I really like the look of the Moon Eyes Bone Shaker, so when TimeRider released a different chassis/base for the Bone Shaker recently on Thingiverse (link below), I decided this was the perfect casting to try it out on. I added some details to the body, including a Moon Speed Equipment decal behind the cab, and then replaced the base. The base replacement changes the engine, changes the skull for a standard radiator, and lowers the overall stance. The casting also got a clear coat over the factory paint.
TimeRider’s Bone Shaker chassis used in this build is located at…
www.thingivers...
This video is NOT intended for children under 14 years old. TV 14 - the video includes language, topics, and involves equipment and chemicals not for children.
If you would like to help support the channel, Patreon memberships are available at / silvadiecastcustoms
…and some merch is available at silva-diecast-...
If you’re looking for some of the items I used in this video, please check out my Amazon storefront located at www.amazon.com...
Check out my other social media accounts at: allmylinks.com/...

Опубликовано:

10 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 87

@neilcummings9939 2 года назад

can never go wrong with a shaker. love what you did to er

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Neil!

@diecastsheriff817 2 года назад

It looks pretty sharp, your ability to show restraint from major alteration gave this project an awesome result!👍👊

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Chip! It's not easy to keep some castings from going under the knife, but I managed it this time lololol

@MapleLeafCustoms 2 года назад

No jeweller's saw. No JB Weld. No Gauzy. And still a fine looking custom! That's a neat little chassis by TimeRider. Sometimes less is more, Jim. Like in this case. Very nice result! 🍁👍

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Andrew! The chassis really made it easy to have some fun with the casting.

@geoffersongeofferies477 2 года назад

A Jim-Silva-sans-Gauzy build?! I never thought I’d live to see that. I guess it took a windowless casting to pull off that feat. Nice job! Another great video.

@JimSilva-SilvaDiecastCustoms 2 года назад

🤣🤣🤣 I was looking around for something I could Gauzy on the build and came up empty 🤣🤣🤣 Thanks so much!

@andretriplett7616 2 года назад

Redlines always look great on any car. Lee did a great job on yhe base. I like the new grill. You did a great job my friend.

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Andre!

@teee4532 2 года назад

Looks great Jim! Love the stance and grill from Timerider. The redlines are a nice touch. It is just a nice clean custom

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks so much! I really wanted a clean look to it...and I'm glad you see that in the build.

@DT99race 2 года назад

Stance is great Jim! Hard to beat that original livery, glad you used it. Black and yellow go together so well 👍😁

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Jim! I like the look too and it also made life easier by keeping it lol (of course, an identical casting I have will be heading to the stripper lol)

@TheWeakenedWarrior 2 года назад

I'm going to have to print out one of those bases. Thanks for providing the link and thanks to the designer of it.

@JimSilva-SilvaDiecastCustoms 2 года назад

You're going to have fun with it!

@ghettodiecastcustoms7988 2 года назад

Pipes are tight & wheels are banging. I think I’m alone not liking the skull on the boneshaker. Came out awesome.

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Miguel! There are a lot of people that cheer when the skull is decapitated off the casting...others see it as a sin lol.

@piston_broke_diecast_customs 2 года назад

Nice. love the idea of the bearing and use of the red line wheels. I wouldn’t mind doing the same to some of my customs.

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Lindsay! Using the bearings and redlines (I got mine from Brightvision) really makes turning castings into redlines very easy.

@TheWeakenedWarrior 2 года назад

I love your commentary and explanation. Thanks for sharing!

@JimSilva-SilvaDiecastCustoms 2 года назад

Thank you so much!

@TimeRider 2 года назад

It looks really cool, glad you had fun with it!

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Lee! You're going to make a fortune off that file...what's that...oh yeah, it's free on Thingiverse lol.

@SummerRoseRacing 2 года назад

This is the first ever lowered Bone Shaker I have seen put together, and it makes for an interesting and unique look (especially without the skull grill cover!). :) Great work on this Jim! :)

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Summer! It’s a really fun casting to work with.

@madilynramos5720 2 года назад

Yay a bone shaker! It’s been a while since you’ve done one of those bad boys. I’m glad you had fun with the build and the stance did come out great :) meaner but also cleaner 👌.

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Daughter! I really enjoy doing that casting...and I have plans for one in the not too distant future (a month-ish or so)

@timburnette5914 2 года назад

Jim wow man. It looks so much better. Great job friend!

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Tim!

@kennybacchus2629 2 года назад

Lowered. Redline boneshaker custom hot wheels. Okay ✅

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Kenny!

@paulayenkelun4349 2 года назад

Hi Jim, I think as usual you did a great job I like the lower stance of the car and that you kept the original paint I think it’s great looking

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Paula!

@charlesdiecastgarage 2 года назад

Man, that is pretty dang neat, Me. Jim!!! 🔥🔥🔥

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Charles!

@Woulda-Shoulda-Coulda-Was-HWRL 2 года назад

Vast improvement! Thank you

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Brian!

@dgs.creates 2 года назад

I'm not big on the bone shakers, can't see past the T1000 grill lol, I really liked how this one came out though. 👏🏻👏🏻👏🏻👏🏻

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks! I think Bone Shakers are that way - either people really love them...or they really hate them 🤣🤣🤣

@jimmyzwheelz 2 года назад

Hi Jim! You know how much I love Bone Shakers, so am really delighted with this build! The stance is fantastic...thank you for the link to chassis. I’m going to give it a try. And the redlines are wheels I’ve been dying to try on a Shaker custom. I assume the sizes you used are large rear and medium fronts? Again, fantastic build...thank you for the inspiration!

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks so much Jimmy! The file Lee created really makes the stance easy to achieve. Yes, I used large rear and medium front wheels from Brightvision on the build. I can't wait to see what you build because your work is exceptional!

@cjdchrissjunkyarddesigns5004 2 года назад

Really like that looks great thanks for sharing

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Chris!

@RedlineGarageHW 2 года назад

That makes two of us this week keeping the original paint lol. I may just have to do one of these sometime 🤔🤔

@JimSilva-SilvaDiecastCustoms 2 года назад

You must do one Don! I'm sure there's some law out there, written or otherwise, that requires you to put some spin on a Bone Shaker 🤣🤣🤣

@kamikaze337 2 года назад

Nicely done Jim

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Anthony!

@SoMoDiecast 2 года назад

Love the build Jim!

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Ron!

@Matt-md5yt 2 года назад

awesome job on this one my friend

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Matt!

@lotharrenz4621 2 года назад

bone shaker turned to road shaver. :) love the result, the new grille looks way better than that skull IMO. :)

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Lothar!

@markrobinson8865 2 года назад

Great job Jim 👍

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Mark!

@markrobinson8865 2 года назад

@@JimSilva-SilvaDiecastCustoms you're welcome 😊

@diecastflashback3331 2 года назад

Nice job Mr. Silva✌️

@JimSilva-SilvaDiecastCustoms 2 года назад

Thank you!

@bsdiecastfantasyland2320 2 года назад

Love it!! Looks super mean! 😎😎👊👊

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks!

@nascargas 2 года назад

Redline conversions are almost always welcome on Hotwheels. It's one of the greatest callbacks to the legendary toymakers heritage legacy. Unfortunately for me....the concept sorta fails for me on this build. I am a purist and love redlines. Dont get me wrong. But being a purist I also look at the idea Hot Wheels was going for when they made this particular livery. That means they utilized A newer wheel in their parts bin to supplement the Mooneyes feel. it really captures the "Moon Disc" wheel covers MoonEyes is known for. Something they created in 2018. But that's me. There is absolutely nothing wrong with your build. It is perfectly executed. On Lee's design..... I sorts wish the radiator was a tad larger. Maybe it's because it is black? I dunno. Seems to me it should be flush with the top of the hood. The side pipes tho. Now that is pure Hot Wheels nostalgia. Remember the small pips that curved up like this on the early models? What a great look this is. Makes the stock version look stupid! Also funny to call a rat rod "stock". Just my 2 cents. Your mileage may vary.

@JimSilva-SilvaDiecastCustoms 2 года назад

While I understand your feeling that the original casting captured the Moon feel better than the redlines, given the number of Moon livery issues they're released with wheels other than the new design, I didn't even blink before changing them out lol. Maybe that's because I often find myself seeing a Hot Wheels casting with anything other than redlines as not quite a "true" Hot Wheels car. Everything I played with as a kid had redlines lol. About the base - if I remember correctly, Lee based his design on early Hot Wheels cars (I can't remember the exact casting off the top of my head, but I think the engine was one he created originally for a car he was restoring) so it truly is a throwback to the original HW designs, and the pipes really are fantastic!

@TimeRider 2 года назад

@@JimSilva-SilvaDiecastCustoms The engine was created for the Demon and size adjusted for the chassis.

@bigcharliesmodelgarage296 2 года назад

😃😃😃😃. Looks great Jim

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Charlie!

@danschopshop7939 2 года назад

Hey as long as that skull is gone, i am happy....LOL...... looks way better buddy

@JimSilva-SilvaDiecastCustoms 2 года назад

LOLOLOL you're not the only one that feels that way Dan lol. Thanks!

@briansdiecastthailandstoth6747 2 года назад

Nice..

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks

@rudygarcia7981 2 года назад

Looks awesome!! This is one of my favorite castings and it's cool to see it as a redline. Always looking forward to your builds. How do you apply the Minwax?

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Rudy! I should have described it a little better - the Minwax clear I use is a rattlecan spray - in this case, I tried something a little different that they make - a Polycrylic clear gloss that is water based that was recommended by another builder (Southpaw Diecast). I'm pretty happy with the results and will have to try it again because it's said not to yellow like their Polyurethane that I usually use.

@rudygarcia7981 2 года назад

@@JimSilva-SilvaDiecastCustoms Thank you. I'm definitely going to look into trying that.

@DevilsCustomsandCreatures 2 года назад

Looks cool Jim, although you have been spoiling us lately with some more involved builds, so I feel jipped.....lol. Nice to do an easy one now and then.

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Jamie! I'm old so I need to rest up before the more involved builds lol The next one up is a redline restomod that was also a little more relaxing/less stressful than the complex builds. No chopping involved lol

@daneself858 2 года назад

Sweet👍🔥🔥🔥👊✌

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks Dane!

@smiles4miles208 2 года назад

Nice 🔥🔥

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks!

@MidIslandCustomDiecast 2 года назад

Makes me want to figure out my 3db printer, lol

@JimSilva-SilvaDiecastCustoms 2 года назад

LOL you should Evan! I just took the stl file that Lee has on Thingverse, tapped the button to have the software add supports, and it printed like a charm. The design file is free and it probably used less than 25 cents of resin lol

@beltfed4624 2 года назад

Lowering that Boneshaker... Now it's a Nutshaker! Sorry! 🤣

@JimSilva-SilvaDiecastCustoms 2 года назад

🤣🤣🤣🤣🤣

@mortenhenningsen940 2 года назад

Looks mean. Wonder how big difference it would make gi collour match the grillshell...

@JimSilva-SilvaDiecastCustoms 2 года назад

Thanks! I think it would be interesting to fully detail the front end. Because of where I was going with the coloring of this build, I wanted it to be primarily black...but if the grill, lights and bezels, and so on were painted to bring out the detail, it could be really interesting.