Lowrance GHOST 360 INSTALL | HOW TO Software Update & Display Setup

Подписаться 12 тыс.

Просмотров 11 тыс.

50% 1

*WATCH THE VIDEO WITH NO MUSIC: • *NO MUSIC* Lowrance GH...
I'm going to install the new Lowrance Trolling Motor Transducer with Active Imaging 3-in-1 nosecone. Then we'll update the software with the new 360 feature. Afterwards, we'll go through the setup to enable the Ghost 360.
The software update introduces the new Ghost 360 feature and compatibility for NAC-2 and NAC-3 autopilots. Ghost 360 offers anglers a high resolution 360-degree detailed image around their boats, allowing anglers to view both standing and laying structures. To utilize the nosecone, you need to have a Ghost Trolling Motor as well as an Elite FS, HDS Carbon or HDS LIVE unit.
Perfect for pinpointing fish-holding areas like rockpiles, standing timber, weedbeds, ditches and drop-offs, the Active Imaging 3-in-1 Nosecone transducer delivers superior clarity and the highest resolution images of fish and structure at a longer range than any other structure imaging technology.
The new autopilot compatibility introduces support for NAC-2 and NAC-3 autopilots on HDS LIVE products, making navigation easier with waypoint and route navigation right from the HDS LIVE unit. Key features include intuitive autopilot interface on the MFD, automated turn patterns, easy setup with auto tuning and calibration, and continuum steering, an autopilot algorithm technology based on decades of development, refining countless hours of real world onwater experience into a system you can trust to take the helm.
NAC-2 autopilots are perfect for boats up to 35-feet and are suitable for low-current hydraulic steering pumps, mechanical drive units, or solenoid valves, while NAC-3 autopilots are ideal for boats 35-feet or greater and are rated to operate high-current pumps, mechanical drive units, and solenoid valves. Industry-standard NMEA 2000® networking and NMEA 0183® input allow for simple connectivity to heading sensors, rudder feedback units, autopilot controllers, and multi-function displays located anywhere on the boat.
Software Download: downloads.lowrance.com
(1) Ghost Trolling Motor version 1.2.00.00
(2) Update depends on type of unit - Elite FS, HDS Carbon or HDS LIVE.
_____
* PLEASE CHECK BACK FOR LIST OF RECOMMENDED GEAR *
Please like and comment on my RU-vid video - would love to hear your thoughts!
SUBSCRIBE to learn more about fishing and hunting: www.youtube.co...
THANKS FOR WATCHING!
_____
Music Credit:
Sappheiros
Stream/Download: fanlink.to/sappheiros-simple-things
License creativecommons.org/licenses/by/3.0/us/
_____
#ghost360 #lowrance #nosecone #bass #stripers #trout #salmon #steelhead #sturgeon #elitefs #carbon #activetarget #3in1 #livescope #livetarget #downscan #sidescan #delta #lowrance #humminbird #garmin #fishing #bassfishing #hdslive #bassboat #fishfinder #electronics #fishingelectronics #lowranceghost #trollingmotor #ghostmotor #fishing #bassfishing #hdslive #hds12 #NMEA #NMEA2000 #transducer

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@nfgassmann8518 2 года назад

Hi Mr. Fong. I really like the teaching videos. After seeing you step through the installation process, and put it through its paces, I'm tempted to stop by and purchase some new tech from your store. I live in Los Gatos and Valley Springs but might make a trip to Sacramento soon. One small suggestion, I'm old and a little hard of hearing. One thing I've noticed about many RU-vid channels, the music in the background is hip and cool, but... a little loud for trying to discern and understand the conversation. Please keep up the good work. I'm sure I'm not the only Wanna-Be fisherman that has followed you and Warren over the years and appreciates it.

@AlanFong 2 года назад

I talked to my producer and on my technical videos were going to leave the music off for now on thanks for the comment

@royseiler6011 2 года назад

Love the new show. I watch on roku One suggestion, the music makes it harder to hear you, better no music.

@AlanFong 2 года назад

Yes on the instructional videos were not going to put music in background

@chasinthedreamwithericdani2411 2 года назад

You just saved me from pulling my hair out!!! I couldn’t figure out how to enable 360 into my page!! Thank You!!!!!!!!

@AlanFong 2 года назад

No problem and if you don't know or have questions about Lowrance units just shoot me a comment! Been with them since the paper graphs & flashers lol

@IRLfishing 2 года назад

Great video I did the install and ghost never popped up so I kept doing update then I watched the whole video and went to advance and turned ghost 👻 on .. thanks Allen..

@AlanFong 2 года назад

Glad it helped always watch til the end lol

@rayvanacore4889 2 года назад

Alan, Another great how to do it video.

@AlanFong 2 года назад

Thanks 👍

@austinmbf 2 года назад

Super video!! Thank you for posting

@AlanFong 2 года назад

Glad you enjoyed it and hope it was helpful if your installing a ghost

@Rollin-With-Kirk 2 года назад

yeh the music is nice but pretty distracting!

@AlanFong 2 года назад

ok lol

@philipekdahl4881 Год назад

Great info thank you

@AlanFong Год назад

Thanks for watching!

@gnfishn1 9 месяцев назад

Where and What SD card are you using? Does it come with the Ghost ? or the New 3n1 nose cone ???????

@AlanFong 9 месяцев назад

You have to get the mini SD card and get the smallest one you can find. Then go to Lowrance web site and find your unit and download the software to your SD card. Then put in unit and let it update the unit.

@lyrics-music1372 2 года назад

Great

@AlanFong 2 года назад

thanks

@williamstuck3066 Год назад

❤

@johnnyng3017 Год назад

Hi Alan, Can the speed control be adjusted so it's easier to adjust, like with my foot?

@AlanFong Год назад

Yes you can! If your talking about the ghost? The dial on the right side pedal is the speed control.

@eddiewilson5518 2 года назад

Great video Alan, when using the 360 can you still do anchor lock or you have to be moving slow for the 360 image

@AlanFong 2 года назад

No can't use anchor lock on the 360 lowrance

@gerlor9425 2 года назад

Hi Allan, please help... I'm new to this... hooked up everything myself. Currently have the ghost and hds 7 live with 3 in 1 nose cone. I hooked up everything without using NMEA 2000. My problem is the HDS live is not recognizing the trolling motor. When I go to update the ghost software, it doesn't list it as an option to select and upgrade. Also my Autopilot option on menu bar shows nothing, it doesnt give me the options to select how which way I want the propeller to face when stowing the ghost. I've already purchased active target and would like such features. Is my wiring wrong? Side scan, down image, 2d work. Just learned how to trurn on 360 from your video so havent test to see if that works. I just updated the latest software with my wifi. Suggestions? Thanks.

@AlanFong 2 года назад

you need to hook up the NMEA 2000 for the ghost to talk to the live. You need the starter kit and power the line.

@larrychastain6830 Год назад

I have ghost trolling motor and elite fs tied into a nema2000 network. I have the nose cone and ghost 360 turned on and activated on me elite. When i access 360 and push the scan button i keep getting a notice that says active pilot is engaged. Disengage and try again. What is this and how do you fix it? Ive got lots of opinions and cant seem to be able to solve the problem. Please help if you can,it would be greatly appreciated appreciated !!!!

@AlanFong Год назад

First I would update your Elite to current software to 23.3 and then upgrade your ghost trolling motor. Then when you turn them on restore defaults on your Elite FS. I work at the Sacramento Fisherman's Warehouse and we can update these if you bring your boat over. But call first and make sure I'm there.