Lq4 4l80e ls swap g body cutlass install part.1 

bro what drive shaft did you use and did you have to cut it? tryna see what I need for my regal 6.0/4180

I'm about to put a 4l80e in a monte carlo ss gbody with no lift in my driveway. Don't know if I have the power to put the sword from the stone but we she'll please send my some strength of hope I'm only 5,6 120 pounds.😧

you still in vegas homeboy? i'll be out there next month

That was not Hercules. That was kind Arthur and Excalibur

tractor supply sells a 3ton bottle jack jack Stand in one unit it has a 32" height limit 4 of them run around 400$ and they work wonders for transmission swaps

Keep up the good work fam I enjoy Tha vids.

Use a block of 4×4 wood on top of the jack to get the car up higher.

🙌😅😅😅 i.loved when he said ." This wat God looks like,(meee÷e)!!! 😥🙌😅😅😅😅🔥🔥🔥🤦‍♂️

get some 4x4 blocks to put on ur jack before lifting

Dr. GURU!!!👍🏾👍🏾👍🏾👏🏾👏🏾👏🏾👊🏾👊🏾👊🏾

That's king Arthur not Hercules bro hahahaha. You put the fluid in before or after you put the trans in?

Still making it happen. Yessuh. ✌🏾👊🏾💯

Wish i stayed by you.. im doing my 83 cutlass right now

Will a stock 4l80e hold up to a 6.0 with ported heads and cam

What other aftermarket transmission companies make good 4l80e’s besides monster transmission in your opinion?

Hahahaha hot ass heat and my fine ass lmao. Man bro u crack me up and the video berly started keep the good work up guru ooowweeeeeeeeeee

That trans gone have that Cutty dancing 💪 ☝

You the GOAT.... What's your thoughts on that AWD 1000+hp cutlass?

you could of used the motor hoist to lift the front end high enogh

See you putting your thing down as always my Brother thanks for sharing 🏁✌️✊🏴‍☠️

How do you like those monster transmissons?

What stall and gearing you going to run ?

push it on card board on the ground and use 2 rachet straps to get it up off the ground under the trans tunnel and then slide trans jack back under it

What’s the name of those cooler lines you use on the 4l60 tranny on g body swap

Did you have to cut the driveshaft down

Hahahahaha oh boy!!!! U is a damn fool man lmao btfu but u got it u tha guru ger tha paypa cuz

Is this dude a mechanic or a comedian lol. Both lol

On the 4l80e which line go to the top of radiator the one close to the starter or the one at the back

Dr. Ru is it difficult to convert DBW to DBC cause I’m having issues with the DBW too

Cracking me up! KMSL 🤣🤣 that Monster trans is a real monster. Put some blocks under your Jack, and jack the Cutty up a little more. Slide that Monster under that beast and slay that beast. DIY'er myself cuz. Lol

Good thing they came in a bag!! You’re going to lose alll that shit lol

The chosen one😂😂

Hey, I need upper hose no that you use please

This is what god looks like me😂😂😂😂😂😂😂😂

That transmission is no joke !!!!

I remember you saying drive by cable tb are getting harder to find would you be interested in buying tbs if i get them? Not tryin to get rich just make some side money,let me know i can ship no problem.

This is what good looks like.......me 🤣🤣🤣🤣🤣

What city/state are you in

yes it is a monster of a trans..if will surely fit but...unless you plan to cross the 6-700 Hp range..you are better served witha well built 200 4R ..check out what "Extreme Automatics" have to offer. the parasitic on a 80e is a lot more than many trans's and you do know you will need to 'massage' your floorboard tunnel for this to fit....and a drive shaft and a controller ..nless you dont mind shifting EVERY shift yourself.

*King

To be 100 what I'm looking at paying you to swap my whip big homie 96 caprice

Dude let me help you I stay in lost Vegas...

Noooooo