Тёмный

LS Turbo Comparison Borg Warner S480 sxe vs S366 sxe 

Gap Sauce
Подписаться 4,6 тыс.
Просмотров 24 тыс.
50% 1

Today we compare the infamous Borg Warner S480SX-E to the much smaller S300SX-E.
Turbo Specs-
S480
Compressor- 80/113mm
Turbine - 83/74mm
T4 A/R 1.10
S366
Compressor - 66/91mm
Turbine - 80-73
T4 A/R 0.91
There were no other changes to the car between turbo swaps. The car actually made the same power but was seeing knock, so timing was reduced to a safe level leaving the result you see in the video.
Which turbo suits you best?
Thanks for watching,
Don't forget to like, comment and subscribe for more of this!
Special thanks to Josh for providing some killer data for the car community!
Cheers,
Blake.

Авто/Мото

Опубликовано:

 

2 май 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 151   
@TorqHub
@TorqHub 3 года назад
Josh has spoken with me a bunch over a few months. That 80mm huffer was totally wrong for his application and goals! Our turbo tonner build series showed him that he could easily achieve his power goals and have WAYYY more power under the curve with a much more modest turbo. Bigger isn't always better boys! Match your turbo kit to your application! Glad Josh has finally got the combo sorted 👌🏻 Well done showcasing it mate.
@ThatGuy_21
@ThatGuy_21 3 года назад
You boyz did a great job on that tunna and great job getting Josh on the right track
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Nice, we had been discussing it too and I think he made the right decision. He actually made a few more numbernon the same timing too, but was seeing knock. Ended up 20hp down up top.
@GapSauceYoutube
@GapSauceYoutube 3 года назад
The GT will be out for roll racing this Sunday guys, stay tuned for some footage 🙂
@kljperformance7372
@kljperformance7372 3 года назад
Keen!
@ThatGuy_21
@ThatGuy_21 3 года назад
V8, manual, and turbo with almost no lag. Perfect street combo 😍
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Yeah it was real nice to drive, just a shame I couldn't give it too much on the street 😅.
@samigirlxoxo1456
@samigirlxoxo1456 3 года назад
Hahahaha that hell quick pic of drift king 🤣 love this vid 👌 good work Gap and Josh 😝
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Hahaha thats actually a pic of Josh... Thanks Sami 🤣
@forestjump3r516
@forestjump3r516 Год назад
Man this thing is so sick
@change_your_oil_regularly4287
@change_your_oil_regularly4287 2 года назад
Love the factory/executive look 👍
@GapSauceYoutube
@GapSauceYoutube 2 года назад
It's a real sleeper!
@needmoreboost6369
@needmoreboost6369 Год назад
Sweet! I’ve been looking for some testing on these turbo’s I’m thinking of bw as a good upgrade to my eBay gtx for my Ecotec
@driftorcircuit
@driftorcircuit 3 года назад
Liking the sleeper, the technical discussion, and the content overall. Keep it up bud.
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Thanks mate, hopefully it helps a few people in optimising their setup 🙂
@ebaxter7
@ebaxter7 Год назад
Great content
@AlexCVPI
@AlexCVPI 2 года назад
That’s a sweet VX. Just needs the VX Series 2 Executive hubcaps to make it official
@PM_Anthony_Albanese
@PM_Anthony_Albanese 3 года назад
I think you're correct to say that the exhaust restriction applied to turning the larger rear wheel is forcing the wastegate open prematurely on the larger turbo. I have seen that weird phenomenon before once but on a 3 rotor Mazda.
@GapSauceYoutube
@GapSauceYoutube 3 года назад
It's a weird one, I would have thought the larger A/R would cause less pressure within the turbine section.. Could it be that the compressor requires much more energy to spin, causing more backpressure too?? Id love a bunch of sensors to know for sure!
@nathanmarschall901
@nathanmarschall901 3 года назад
Great video, love it. Got a s480 on my 383ci 3.9 gears, t56. Had a ton of issues with back pressure. Only had 3inch dump to twin 3inch previously, changed to 4inch dump and all good. Making 488rwkw on a run in tune 98oct. Feels good. Be interested to know what a smaller turbo is like. (Previously was a 5.3 with the same turbo, imo the turbo was too big for that combo and the street)
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Oh nice, the extra cubes would be really nice for the 80mm. 3inch is very small for those cubes 😅 The s366 was really nice to drive!
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Which turbo would perform best on e85? Same result?
@Matthew330ba
@Matthew330ba 3 года назад
I reckon it’s because it a lot harder to slow down the larger impeller in the s480 than the s366, so it goes out through the blowoff valve, & once it’s been cracked, the close point for the blowoff is less than the open, so boost pressures have to go down enough to close it, hence the loss of boost when letting off throttle in the larger turbo. Just a guess
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Ahh that's an interesting theory mate. Wish we had access to as many sensors as we could fit in the car to know for sure!
@blow0me
@blow0me 2 года назад
great test.
@GapSauceYoutube
@GapSauceYoutube 2 года назад
Thanks 🙂
@danmck8965
@danmck8965 3 года назад
Damm ur boy can drive 👌 cool car for a holden
@GapSauceYoutube
@GapSauceYoutube 3 года назад
DK ain't no Gaijin 😉. It's pretty awesome isn't it!
@andrew44484
@andrew44484 3 года назад
This guy can street and peddle! I was on the track with him a few times watching him in the review mirror and infront of me 🤣
@GapSauceYoutube
@GapSauceYoutube 3 года назад
He's a beast!
@JoshJ285
@JoshJ285 3 года назад
Thanks man!
@user-ev1sz6kg1t
@user-ev1sz6kg1t 2 года назад
Yes some sick driving at the end
@6.liter-beater
@6.liter-beater 2 месяца назад
Would love to see rear end setup!
@thomaspappinphotography2593
@thomaspappinphotography2593 3 года назад
Wooooo let’s go!!!
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Yeah buddy!!
@davidbailey1721
@davidbailey1721 2 года назад
The VCM710 may have a bit too much valve overlap to be fully efficient in boosted applications due to bleed off. He’d more than likely make more power with a cam that has a larger LSA/smaller overlap. However, the chop of the VCM710 is undeniable.
@GapSauceYoutube
@GapSauceYoutube 2 года назад
It's very dependent on the pressure ratio of the turbine and the fuel used. I believe improvements could be made also.
@OZZYxcon_GTSR1000hp
@OZZYxcon_GTSR1000hp 3 года назад
Love the sleeper 🤤👌👌
@GapSauceYoutube
@GapSauceYoutube 3 года назад
It was really nice to drive too, most people wouldn't look twice at it 😅
@OZZYxcon_GTSR1000hp
@OZZYxcon_GTSR1000hp 3 года назад
@@GapSauceRU-vid 👌😎 and like ya videos mate gave u a subscribe 👌😎 keep a eye out on mine I’m just about to get my GTSR back with a fully built DART427 with a Kong 2650 on it running E85+meth hopping to hit a 1000+hp 🤞🤞🤞
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Thanks mate, appreciate it! That sounds amazing! The GTSR's are such a cool car and they don't take alot of power to really move either.
@FredAllenBurge
@FredAllenBurge 3 года назад
What size turbine wheel was on the s480? If it was the standard 96x88 wheel you'd never have a back pressure issue until over 900rwhp. Did it have some small turbine wheel?
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Hey mate, the full specs of the turbos in in the description of the video. It's not that it had a backpressure issue, just that there was more backpressure as the gate needed the duty cycle adjusted (adding more pressure to the other side of the gate to keep the boost up) The s366 actually made a couple numbers more that the s480 on the same boost which backs the theory up. I'm not 100% on it though, so I'd love to hear everyone's thoughts. Is the larger compressor taking more backpressure to turn?
@gavwilldo
@gavwilldo 2 года назад
I guess cam and individual setup makes a big difference, I originally turbo’d my vx commodore with a t51r with a 1.15ar t4 rear housing, I put a small cam in and valve springs on an otherwise stock engine before I drove it boosted, it easily made 15psi before 3000rpm and made 702rwhp on 98 fuel, there was so much back pressure that I needed 15psi spring in the wastegate to make 7psi without a boost controller, the turbo felt way to small, I now have a gtx55, 88mm turbo with a 402 stroker ls and it’s makes its 20psi on the converter at 4000rpm like it’s nothing and feels awesome to drive. There’s obviously more ways to make something more responsive than putting a tiny turbo on there and restricting top end power, all depends what you’re after I guess.
@GapSauceYoutube
@GapSauceYoutube 2 года назад
Auto is a completely different ball game though. The S480 was taking several seconds from a 60 roll to even make usable boost. Crossover piping size and merge design would play a huge part in the spool too. This particular setup was night and day difference. There's only so much you can feed a stock bottom end LS1 for drifting. In this case the smaller s366 actually had less backpressure as it didn't have the larger compressor wheel to turn. Diameter is leverage and on the same timing, it actually made slightly more power on the s366. On an optimal setup with an auto, you could definitely afford to go larger without suffering driveability. I'm glad you're happy with yours 🙂 Also, we talked about advancing the cam a few degrees to bring it up again but it's responsive enough as it is. 🙂
@7_au
@7_au Год назад
Went for a pulsar 3584. Spools great, full boost just a tad over 3-3.5k rpm on a Barra. 400kw on low boost which is a measly 15 pound. Plan to turn it up, was limited by a boost control issue.
@GapSauceYoutube
@GapSauceYoutube 7 месяцев назад
Great power for 15psi mate. Most 98 cars with 3582 make an honest 320rwkw and run 117-121mph.
@reeceewing721
@reeceewing721 2 года назад
whats the radiator setup? Currently getting prepared to do the turbo conversion on my vy. Looks like an inline radiator cap retaining the factory radiator ?
@JoshJ285
@JoshJ285 2 года назад
Hey mate yeah just the stock radiator with an inline cap and an overflow bottle
@ripper3925
@ripper3925 2 года назад
hopefully you can reply just wondering what a/r size you used for the vx
@GapSauceYoutube
@GapSauceYoutube 2 года назад
Hey mate, all the turbo specs should be in the video, but I believe the turbine is .91
@Chaser8280
@Chaser8280 3 года назад
whether the backpressure was due to similar exhausts? Did the exhaust change from the s480 to the s366?
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Same exhaust mate. 🤔
@braydp1818
@braydp1818 2 года назад
Hi did the rings get gapped when you put turbo on it's awesome car mate
@JoshJ285
@JoshJ285 2 года назад
Nah just cam, pushrods and valve springs.
@rorycollett3744
@rorycollett3744 3 года назад
In a few tests the s4080 hates the t4 housing and small turbine wheel it actually makes it lagier
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Really? I wonder if they used a t6 manifold with t4 adapter or something.. from a physics standpoint, that should make sense but you never know!
@lodeo001
@lodeo001 3 года назад
Make small turbos great again 😁 area under the curve makes all the difference in a manual car that gets driven! Can steer!
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Yeah buddy! I think it was perfect for the street. Would make even more on e85 too, can't argue with a 4000rpm powerband if not more!
@JoshJ285
@JoshJ285 3 года назад
It is a much better car to drive now, especially as a manual.
@RedDuster
@RedDuster 3 года назад
Go-kart track @ Raliegh Raceway NSW at the end 👍
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Looks fun doesn't it!
@RedDuster
@RedDuster 3 года назад
@@GapSauceRU-vid great venue for supermotard also. Haven’t been there for years but hear that it’s a little run down these days
@GapSauceYoutube
@GapSauceYoutube 3 года назад
@@RedDuster yeah that looks like it would be fun! Maybe a bit sketchy for me though on two wheels 😅
@dilsher12
@dilsher12 2 года назад
I have a t4 S475 1.10 on a 5.3 full boost by 3000rpm and will make 800rwhp . The exhuast side is a little small would like to try the T6 s475 .
@GapSauceYoutube
@GapSauceYoutube 2 года назад
Nice, auto trans? E85? I'd be interested in seeing you pressure ratio.
@dilsher12
@dilsher12 2 года назад
@@GapSauceRU-vid Yes 4l80e, triple disk lockup , it's a tight converter 3000-3200 stall. I switch between pump e85 usually e50-55 and pump gas with water meth. The e85 definitely helps a lot with making power . The pressure ratio is through the roof I can tell lol definitely 2:1 . I have a wide LSA LS9 factory cam minimal overlap might help with high pressure ratio.
@davidprasad290
@davidprasad290 2 года назад
What's the Fuel system, injectors etc?
@JoshJ285
@JoshJ285 2 года назад
Walbro 525 intank pump with upgraded wiring to the pump and bosch 1000's
@Fuaarrkk
@Fuaarrkk 3 года назад
“Oh….that’s not an Ecotec” hahahah idk why but that was funny as 😂 And fuck me that thing would get down and boogie. Love how it’s just a full blown sleeper 💪🏼
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Haha, it would definitely catch a lot of people off guard. The car is super clean too!
@RedsProjects
@RedsProjects Год назад
When I first seen the thumbnail for this video I though you were comparing a t6 s480 to twin s366s as some people do for drag setups. I would not have thought a single 66/73 would have been too small for a ls1, but it appears to work really well for a manual street car. Is the ls1 still alive and kicking?
@GapSauceYoutube
@GapSauceYoutube Год назад
The turbines are very similar between the two and the compressor ended up moving enough air for 610whp on e85 but was left there for the stock bottom end. The car did alot of drifting sessions at the track at up to 7000rpm and plenty of street use, unfortunately we just saw the bore split just recently and a rebuild is in order.
@RedsProjects
@RedsProjects Год назад
Yeah cool, just check the specs and yeah pretty much same on exhaust side. How much boost does it run? Looked like about 10-12 ish? The response looks great, I would be worried about having too much boost down low and having a manual you can really load it up down low and fold a rod in a sbe
@GapSauceYoutube
@GapSauceYoutube Год назад
@@RedsProjects You can bring it in softly with the timing but from memory it was around 13-14psi for 610whp and survived alot of abuse. 550hp@11-12ish
@RedsProjects
@RedsProjects Год назад
@GapSauceRU-vid yeah it looked like the car loved the abuse from the last part of the video. I see a lot of sbe drag cars are doing their best to keep the boost and torque in low rpm down to keep them alive at high power figures. Have you watched any videos from squirrel tuned?
@andrewvassallo3444
@andrewvassallo3444 Год назад
Hi did you change the valve springs
@JoshJ285
@JoshJ285 Год назад
Yes when doing the cam kit. It has dual springs.
@drzorderz470
@drzorderz470 3 года назад
Old mate knows how to work the wheel!!!
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Haha, I heard he was the stunt driver for DK in Tokyo drift 🤫
@danielbullock445
@danielbullock445 2 года назад
What size turbine housing did you use on the S366?
@GapSauceYoutube
@GapSauceYoutube 2 года назад
Hi mate, it may be in the video description. If not I'll find out for you 🙂
@danielbullock445
@danielbullock445 2 года назад
@@GapSauceRU-vid shit it is there youre dead right!
@GapSauceYoutube
@GapSauceYoutube 2 года назад
@@danielbullock445 It drove really nice on the street, I was Impressed at the response.
@thatguyben3128
@thatguyben3128 3 года назад
Most important technical detail was left out ... GMH couldn’t do it stock standard so how the hell does Josh keep those *hubcaps* from coming off with a *turbo LS1* 💡
@GapSauceYoutube
@GapSauceYoutube 3 года назад
🤣🤣🤣🤣 Some sort of Wizardy..
@JoshJ285
@JoshJ285 3 года назад
Haha! I have lost two over the years but apart from that they have been fine even with being swapped over many times. Nothing else holding them on either.
@thatguyben3128
@thatguyben3128 3 года назад
@@JoshJ285 impressive, I was sure it was going to be cable ties even though i couldnt see them. Respect the sleeper look dude, 100%.
@JoshJ285
@JoshJ285 3 года назад
@@thatguyben3128 Nah that would be a good idea but i would be too concerned about how shit it would look haha. Thanks man.
@300kwv6
@300kwv6 2 года назад
Zip ties 🙂
@floydharrington5672
@floydharrington5672 2 года назад
What Cam was you running ?
@JoshJ285
@JoshJ285 Год назад
Vcm 710 232/234 110 LSA
@MrLincoln87
@MrLincoln87 3 года назад
Cool comparison. Alternatively however, you could have gone for a big money motor build to match the ol S480
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Definitely could, but we thought this represented the majority of street cars here, stock bottom end on pump fuel. The car did make 300rwkw n/a as well 🙂
@MrLincoln87
@MrLincoln87 3 года назад
@@GapSauceRU-vid No no I liked this very much. Like you said, majority street cars/people would just go big turbo bigger is better mentality. Very little loses up top, big gains down low
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Thanks for watching mate 🙂 I'm keen to get some more testing done! The s366 actually made a couple numbers more before timing was pulled for safety. Cool hey 🙂
@or-ian6973
@or-ian6973 Год назад
I made 572/583tq on 92oct dyno jet. s366sx .91 housing. 14 psi 14 degrees timing. Small turbo runs a little hot but she lights up quick. Solid choice for a street car if you want to keep it under 600 on pump gas. Could have made more torque...all in the tune. 5.3l 862 heads, 218/220 cam. Curious what a bigger turbine housing would do or the s369. If the IAT's would come down run a little less boost for the same power the s369 sounds better. Especially if you want 600whp on pump gas.
@GapSauceYoutube
@GapSauceYoutube Год назад
Josh ended up running e85 on this combo and made a touch over 600hp, I believe it was 14psi. S369 would be a good upgrade if you wanted a nice 650.
@or-ian6973
@or-ian6973 2 месяца назад
@@GapSauceRU-vid Just wanted to add to this. I ended up going to a 1.0 AR housing. No change in the tune. The only difference I can really tell is the turbo spools slower. I'd imagine there's less back pressure thus helping hold boost later in the rpm range. I didnt mention before this on a 5spd truck. It's kind of a give and take situation. I miss how easy it was to make it spool when just cruising around. But the point of it was to gain some top end at the drag strip. Not sure if ill stick with it or not. I'm really not sure if its better or the same. Regardless the s366 is small for a 5.3l and it chokes bad up top. I have to ramp boost up just to hold 14psi. I've never been able to hit and hold 16psi. But if you want to make under 600hp its a solid choice for the street but not the drag strip. I've never ran it with open exhaust. I run a 3.5DP to 3" that exits in front of the back tire. This could be part of the issue. Very curious how the 74mm turbine version would do. Maybe a 69/74. Best of both worlds?
@GapSauceYoutube
@GapSauceYoutube 2 месяца назад
@@or-ian6973 Interesting, you could add a couple of degrees advance to the cam, or go a custom one. (Happy to help there). Spend some time on the injection angle and timing as boost is ramping. Wrapping the headers will help somewhat as well for spool. You can make over 600 on an LS1 so you should be able to do a little more on the 5.3.
@mun33y
@mun33y Год назад
What gearbox spec and how much boost you running ?
@JoshJ285
@JoshJ285 Год назад
Stock T56 and 12-13 psi
@change_your_oil_regularly4287
@change_your_oil_regularly4287 2 года назад
I had the vcm number 7 cam (NA) im my VX SS along with a lot of other stuff. 7000rpm on stock bottom end & 290rwkw. Should have kept that car 😔 as well as my hz 308 th400 😔 and my vb 253 m21 touring car kitted 😔 and my LX Sunbird 173ci trimatic 😔 and..... I'm sure a lot of people feel the same about some of the cars they've let go.
@GapSauceYoutube
@GapSauceYoutube 2 года назад
Nice list of cars there mate! I have a few that I will always miss, My Cammed T2 TE50 manual is at the top of that list though.
@vongdong10
@vongdong10 9 месяцев назад
I need a smaller turbo for my monaro. I went with a 1000hp turbo and totally regret it for street driving. Good result with the smaller turbo, makes the same power as mine. Im looking for a new turbo and pulsar recommended their equivalent of a g42-1450 with a 1.15. Way too large of a turbo imo.
@GapSauceYoutube
@GapSauceYoutube 9 месяцев назад
I'm likely going to run the g42-1450 on this 5.4 but it's more for roll racing and drag application with n20 for spool if required. You could go for an sxe s372 as a middle ground if it's a 5.7/6L?
@vongdong10
@vongdong10 9 месяцев назад
@@GapSauceRU-vid I was thinking of going with a g40-900 or g40-1150 since its primarily a street car. Stock 5.7, 98 only as I can't get e85 where I am.
@JoshJ285
@JoshJ285 8 месяцев назад
​@@vongdong10If i had enough time and money i would love to throw a g40 1150 on it and compare to the s366
@Barrydick186
@Barrydick186 3 года назад
Just need to test an S475 now
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Thats Definitely something I'd love to do!
@johnm4393
@johnm4393 2 года назад
Correct, and maybe let it feed, Say to 15-17psi.
@melvinkaran5934
@melvinkaran5934 Год назад
What size exhaust mate?
@JoshJ285
@JoshJ285 Год назад
3.5 inch dump into twin 3 inch into twin 2.5 inch cat back.
@KreatorOfDeath1985
@KreatorOfDeath1985 3 года назад
Maann... I just mounted and set up an s480 on my 6.0... you guys think I'll be ok?
@GapSauceYoutube
@GapSauceYoutube 3 года назад
You have a few extra cubes which will help, it would work alot nicer with e85 and an auto trans with an appropriate stall. It all depends on personal preference, everyone likes to defend their choice. There's a big difference between what "lag" is acceptable at the strip vs on the street. Josh's vx would take several seconds to hit usable boost from a 60roll in 2nd which meant he had a hard time roll racing at powercruise.
@GapSauceYoutube
@GapSauceYoutube 3 года назад
I'd your intent is to keep the s480, fab the largest dump you can fit in there, ensure the crossover pipe isn't excessively large and I'd exhaust wrap anything pre-turbo (Inc dump) this will all work towards better spool and a reasonable boost threshold.
@KreatorOfDeath1985
@KreatorOfDeath1985 3 года назад
@@GapSauceRU-vid its a 6 speed , I'm too far into the build to quit now. I have 2.25 inch crossover into a 3 inch flange. We'll see what happens man!
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Keep the 6speed, loads more fun!
@doingitwronggarage9651
@doingitwronggarage9651 Год назад
The S366SX-E seems to be a very good match for this engine / set up. Converting KW to hp and converting boost to MAP and dividing the two gives us 314 hp at the hubs from "The theoretical NA engine". (314 hp / 350 CID = ;) ) This is about 32 lb/min airflow in the compressormap, right? 1 BAR boost doubles this to 64 lb/min. A X mark at 64 x 2.0 in the S366SXE compressormap is just within the 70% line = this turbo is not too small = S480 is overly large for THIS particular engine. We have seen 420 hp at the hubs from "the theoretical NA engine" from budget 5.3 L engine running up to 20 psi boost on petrol fuel, not E85. :)
@GapSauceYoutube
@GapSauceYoutube 7 месяцев назад
I like the thinking, this particular car made 385rwhp n/a. 620hp on 13psi from memory on e85 before it split a bore.
@ReiniGrauer
@ReiniGrauer 3 года назад
No surprise that at 550hp a s480 is the wrong turbo. Also, an S480 with a t4 and a small turbine wheel like that is just about never the right call. Why was this combo ever even chosen?
@GapSauceYoutube
@GapSauceYoutube 3 года назад
It's a surprise to alot of people who were told it's the best turbo for the application, I believe this was sold as a kit with the recommendation for the s480. Josh decided he could do better and made the swap and he's stoked. You would be surprised how many people have told us swear that their s480 still spools like the s366 in the video. 🤷‍♂️
@erichill5660
@erichill5660 2 года назад
Am I reading that right? Is my math jacked up? 409kw=548hp 967nm=713ft/lbs?
@GapSauceYoutube
@GapSauceYoutube 2 года назад
Sounds about right mate.
@funcraig
@funcraig 3 года назад
I would be curious how the back pressure and lag would compare to the s366 if the slightly bigger s369 or s372 were used but killer results on that car congrats
@GapSauceYoutube
@GapSauceYoutube 3 года назад
I'd love to find out! Josh is about to make the swap to e85 and share his results with us in regards to backpressure and cooling etc.
@hereinmissoula11
@hereinmissoula11 2 года назад
@@GapSauceRU-vid the older sx s366's will go farther than the new sxe.... you will see on the dyno if you try it. sxe does NOT have a "clipped" exhaust wheel. Older s366 will go 50-100 hp farther depending on displacment of engine its on.
@toneabet6252
@toneabet6252 3 года назад
So why is everyone putting the s480 in?
@GapSauceYoutube
@GapSauceYoutube 3 года назад
In this case, it was sold with the kit. But Josh wanted a more refined setup, and I think he got it!
@toneabet6252
@toneabet6252 3 года назад
@@GapSauceRU-vid sweet as. What cam and diff gears?
@JoshJ285
@JoshJ285 3 года назад
@@toneabet6252 Hey mate vcm 710 cam ans stock 3.46 diff gears
@toneabet6252
@toneabet6252 3 года назад
@@JoshJ285 awesome. Nice work
@yotaismygame
@yotaismygame 3 года назад
Old version or SXE s366?
@GapSauceYoutube
@GapSauceYoutube 3 года назад
SXE
@yotaismygame
@yotaismygame 3 года назад
@@GapSauceRU-vid dang I just ordered the sx for my 5.3
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Hell yeah! Both turbos in our test were SXE. What's the 5.3 setup? Those things are really nice.
@yotaismygame
@yotaismygame 3 года назад
@@GapSauceRU-vid just stock 5.3 with a 216/220 cam. Planned to run a s366 since I started the build. Nice to finally see someone post some good footage of one. Hard to find much info on them on a LS on YT.
@yotaismygame
@yotaismygame 3 года назад
Hopefully the old style sx is somewhat similar to the sxe. Not looking for much power so I’m not worried about that.
@skynet36
@skynet36 6 месяцев назад
you can be my wheelman anytime
@abdullahalaraimi6087
@abdullahalaraimi6087 3 года назад
Stock engine?
@GapSauceYoutube
@GapSauceYoutube 3 года назад
Stock bottom end, cam. Made 300rwkw n/a
@abdullahalaraimi6087
@abdullahalaraimi6087 3 года назад
@@GapSauceRU-vid do you know how much ls2 can handle with boost application and stock bottom end? I mean maximum hp without harming the engine
@GapSauceYoutube
@GapSauceYoutube 3 года назад
@@abdullahalaraimi6087 Guys have been 8s with stock bottom end LS2's. I'd consider upgrading the rod bolts if I was going to spin any rpm/power though, and stay away from the limiter
@rubberbandman2540
@rubberbandman2540 Год назад
hey mate what fuel system is this vehicle running and what fuel type also would love to know how you guys setup the fuel system in it
@GapSauceYoutube
@GapSauceYoutube Год назад
At the time of this video it was running 98. Later upgraded to e85 and made a touch over 600hp. I believe he just upgraded the fuel system in it actually recently. I'll have a really nice video about building a hard line fuel system in the next month or two, surge/fuel cooler etc too.
@rubberbandman2540
@rubberbandman2540 Год назад
@@GapSauceRU-vid true that's pretty cool I'm interested in seeing how he kept the dead head rail on this car and if he mounted the reg under the vehicle or if he kept the dead head reg in the tank
@JoshJ285
@JoshJ285 8 месяцев назад
​@@rubberbandman2540Hey mate at the time of this video it was just the stock reg in the tank and a walbro 525 with upgraded wiring to it. Ended up making 610hp on e85 with that set up. It has since been upgraded to a surge and manifold referenced fuel pressure reg
@rubberbandman2540
@rubberbandman2540 8 месяцев назад
@@JoshJ285 cheers bro for the reply I'm about to use a $366 turbo on my cammed ls1 so you information is very handy cheers
@JoshJ285
@JoshJ285 8 месяцев назад
@@rubberbandman2540 No worries
Далее
1300hp street Holden SS | fullBOOST
6:22
Просмотров 68 тыс.
Поём вместе с CLEXXD🥵 | WICSUR #shorts
01:00
G42-1200 turbo, the original or the Pulsar copy.
10:06
LS1 turbo street dyno ~ C&A Auto Fashion
1:40
Просмотров 39 тыс.