LSX 3rd Gen Camaro Fitech Ultimate LS First Drive LS3 with 600 lift Cam!!! 

Lol man I know that feel brotha finishing a fresh build and having it do exactly what you hoped and prayed it would, beautiful car keep it shiny, loud, and fast.

Bro your excitement is so joyous to watch!

Bro when you where spinning on the interstate I was hype right with you haha! Good shit I just purchased my 87 iroc last Sunday!

Outstanding brother!!!! I've had 3 IROC Z cars!!!! Seeing this is going to make me get number 4!!! Thanks so much for sharing this!!!!

Glad u got it going man, felt bad when the first motor crapped out. Minor setback for a major comeback! 💯💯

I felt that excitement @ 8:42!! Happy for you!

Awsome video, glad that you finaly got to enjoy the car on the road, nice work and a truly awsome lookin camaro

Nice job! Looks really good. Can’t wait to see some videos when you can get on it.

I love it and your reactions are priceless great build!

“I can’t get on it too hard.” *does 2nd gear burnout* lol

bro thats sick. I applaud you on the build. i hope soon someday to do my own build. thats one sweet ride!!!!

That is so damn clean, wow! Looks and sounds amazing 👍

I noticed the service engine light was on. I have a 89 iroc I just had the engine completely gone thru with bigger cam, headers and higher psi injectors and all emission junk that killed the muscle cars in the 80's and had the chip done by a company out of Mooresville NC. And my service engine light stays on. Runs good thou. Rally nice ride u have and great engine build. 👍

Very nice happy for you .I have a 89 red IROC with a texas speed perf.LS3 , Cam lift is 629 / 615 4L80E fully built 2800 stall and a 9" with 410 gears with sticky NITTOs It`s a blast every day driver.

Bad ass build. These 3rd gens are coming back into style and a build like this just makes them that much cooler. Just gonna point out that duration of a cam makes it "big" not the lift a 224 duration is smaller that a 232 duration even though the 224 could have 600 lift and the 232 can have 550 lift the 232 would still be a "bigger" can based on amount of vacuum the engine is pulling during idle and power range.

Your reaction when you get on it a little is amazing!

Great build you were very exited woo hoo hoo.

the engine looks beautiful in that engine bay. nicely done

I have a red 91 formula. With t56. It has a 383 12.5 comp megasquirted. I feel you pride. Nothing better then doing it yourself. Your car looks and sound beautiful. I also live in Minnesota. Get it out and enjoy it before winter comes.

Congrats. I love 3rd gens

This gets me so pumped to start my own build

Love the Car, I literally just found an 89 Iroc today while I was on Route at work. Gonna go make an offer this weekend

Great job, rightfully proud of your self.

Love this! My crate ls3 is getting cammed ,heads ported and rings gapped for the LSA charger. My car should of been done years ago but glad I took my time and got and did everything the way I wanted. Thirdgens Rule 🤙

Beautiful car nice job!

This is a sick gen 3!! Great job man! I just picked up a sweet 83 Z28 HO in great condition that had already been swapped with a small block 350. Working on fixing it up with the 350 for now, but want to LS swap it down the road. Hope mine turns out as good as yours looks and sounds in the end!

Got my 91 RS .. just doing a lifter,header,cam on the 305 .. for now .. love it man ... Hope to have the feeling like you on that interstate entrance .. keep ripping man 👍👍

Very clean looking IROC.

I love the 80s themed music!

Yaaaaa maan!!!! I got an 89iroc z justvthe exactly same colors as yours and very clean too I'm about to be ready to install ls3 in it 😜😜😜😜 from Pennsylvania

Beautiful car and build bro! Major props, but please level out the stance lol it’s soooo high in the front end lord have mercy lol

Nice!!! Very clean I’m doing genV swap right now to my third gen

Glad to see it back on the road he’ll yeah

Sounds good! Thing has some power!!

Chingon ese tercerita con corazon nuevo..nada como esa carroceria con potencia moderna.

Nice ride that's tough

I hope that fitech system works well still. I'm fixing to use one for my 3rd gen build

Nice work. I had a 89 iroc back in 1990 I put a 456 rear auburn posi with a bow tie 450hp roller motor aluminum ported polished heads 632 lift cam tci 3 speed trans with 3500 stall speed converter with the lock switch to act as overdrive, roll bar lowered the car custom true dual exhaust flo-masters with headers rebuilt dash with all auto meter gauges car ran low 11's but my biggest mistake was not installing new wiring harness and dealt with electrical issues msd box worked well but overall going to do this again but as an older guy got my brain wired better LOL and will do a complete resto-mod and design a monster. I was 20yrs old when I did my first car and have owned well over 150 ars since and right now driving 17 c7 zo6 and its a blast so far but loved the Iroc platform, great car, and you have done an awesome job so far. Keep at it man looks Great.

With a ls roller lift cam there is no "break in" period. As soon as I first start the motor the rings are bedded in and you can run it hard as u want.

Gave me goosebumps lol ,just got my 6.0 I'm putting in my 86

Great looking and great sounding car.

Good job bro!!

It looks sooooo good

Recently tracked down my old high school car, from Iowa to its current owner in California. An 87 trans am I owned from 93 til 99. It's a f'n disaster. I wanted to buy it back and LS swap it but though I decent with body and paint I am no good under the hood and wouldnt even know where to start. Can't find anyone in my small Iowa town to even talk about it. I wish I had learned more mechanic skills when I was younger!

Good shit!!! Im planning on throwing a ls1 into my 89 camaro

Very nice rock and hell of job on build and install couldn't have done it better my damn self

Hell yeah!!! 💪🏽

I know exactly how you feel when your car accelerates like that. It's those little moments that make life worth living. I hope to make a similar video with my car soon!

That’s really really nice

BADASS!!! Anybody else notice how low the gas and diesel was back then?

She's beautiful, 3rd Gens aremy preference as well. I sold my 92 rs in 2022 to start on the 5.3 LS swap in my 06 rt magnum wagon with a dead hemi . My 92 was clean and ran like new and all stock except her chrome 20 irocs so she didn't need her 305 swapped for an LS . I'm looking for another black 91 or 92 rs hardtop and may get a proj to use my other 5.3 swap I have . I love the 5.3 motors and all 3 of my burbans I have and drive are 5.3s (03,07 & 2010). I don't understand why I see more fox body stangs with LS swaps than 3rd Gen camaro ls swaps but there are 10k stangs of every body style with LS swaps rolling around or at strips

Speed density uses map sensor and rpm sensor.. the vehicle speed sensor will not be effected... awesome car btw.. well done.. just got done rebuilding my ls3 aswell.

Did you have to use sub frame connectors since the car is a T-Top ??

Sweet! gotta love it, my time is coming, 83 Z28 LS swap. ENJOY

bad ass video brother

You need to get some red fuzzy dice for your rear view.

You had me laughing at 8:33. I got a 84 z28. Ttops, 5speed. 355, big cam, true duals. I go sideways everywhere I go. 😆 mine will have the ls t56 swap someday.... probably the day my 355 or t5 let's go... I'm betting on the t5 to shit the bed first.

Very nice, where did you get your LED headlights from?

great job man! it's always a good feeling on something you built. is your EFI not tied into the car obd? get rid of the SES bulb if not. and a short throw shifter will improve the driving experience. man i miss my camaro. too nervous to drive it around with all the wacko's out there.

Sweet doom soundtrack lol cars great

Awesome car man! I’m looking to sell my two camaros I have and finally get me the third gen I been wanting for years.

How long did the swap take? Did you run into any problems?

You should make a coffee table out of the old block. Clean it up first then make a garage table out of it.

What transmission are you running?

Nice Build... I can't get on it too hard because it's a brand new engine Lol.

Badass bro

This is sick man. Question is it lowered? If so how’s the exhaust clearance? Wheels what size and width front and back? Did you go with long tubes also?

Where did you get the motor mounts for the swap, im gonna start a LS swap on mine soon?

like the 4" lift kit XD

Badass !

Nice, dude.

nice car man 3rd gen classic red with polished Iroc wheels I want to get My 91 RS upgraded, the vision is Ls6, TKX 5 speed, GTA dana rearend,. I was wondering why no one uses the TPI front mount airbox? not a big fan of the straight pipe CAI, I would rather have an enclosed airbox taping air from infront of the rad with tapered intake boot for volisity

Sweet iroc. I just bought a 85 iroc and am looking to do the same thing. How much hp you think that ls3 is making? What size wheels are those?

Just got a 89Camaro RS with the 5.0 305!! Any suggestions on what to swap in? I want her as a daily so nothing too crazy lol 😆 ⛽️🙏🏾I live in California so want reliability out of everything

Love it

That is a beautiful build it’s getting me back into working on my swap I’m using the fitech as well have you messed with any of the settings iac or no?

If you ever want to go for a cruise im always willing to with other 3rd geners. We have to stick together.

Nice. Good setup. You going to lower the front end down at least an inch? That gap up front between the fender and tire is huge!!

This thing is nasty 😷 you did a amazing job

Those rings seat within 60 seconds of running.. Yo, your up in Brooklyn c somewhere eh? We will def have to meet up sometime this year. I've got a 84 z, built up nicely. Nice street car. Buddy has a 84 z also, resto, very nice cars. Be 3 mint zs lined up.

Live from BP!

Yea this video is bad ass

I heard that 4th gen seatbelts are compatible with the 3rd gen, can anyone back that up??

Bad ass car bro 🔥🔥🔥🔥 I’m in the market in buying an iroc-z what major things should I look for when purchasing one? I also want to do an Ls swap on in the near future. 💪🏼

What's the tire size on 18" Iroc Rims? 245x 40 18 or 245x 35 18? Thk

Is that the Bill's off East River Road in Champlin?

fucking badass!!! sick ,clean car

where did you get the T56 and what mods did you make to it?

Hey man did you leave the stock fuel tank in it, if so do you have in tank pump?

This car is so sweet inside and out. Did you do the work yourself? Sounds amazing too

Man fix wheel arch gap issue and it's golden.

How did you drive it with the paint still wet !! 😛 Looks awesome !! Perfect Clean Camaro

This is my dream build but in Black and an electronic dash

What headers did you use and is it true dual exhaust?

daaamn brother, got that lift kit on the 'maro?

What k member did u use and did you remplaced the panel oil?

Love the car... what cam in the LS3 ?

Hey how does the unibody handle the torque with t tops and no roll bar??

Would love to send some pics but I do not know how.. LOL

Man I want to go T56 in my 88 Monte Carlo SS so bad lol