High Quality LS3 Swapped 3rd Gen Camaro. 

Very nice you and Matt have two of the best 3rd gens I've seen.

This is hands down one of the cleanest builds I’ve ever seen

proof that money can and does buy happiness. Id love to put $30,000 into my $5,000 1986 z28. But, you know. Priorities......

I love the clean stock look you went for and that red sets it off perfectly loving the Camaro fam

LOVE THE TRAC SPEC HOOD VENTS...

That is a nice clean install! I like the subtly behind the build. Its not over the top like some builds and it sounds and looks like something you can enjoy daily driving.

About 9 years ago when I became homeowner I had to give up my 91 Z28 LT1 swap. Shout out to caligeneralz cc. Couldn't handle both. Clean IROC man. Beautiful 😍

I searched for a 3 Gen Z or a ‘92 Firebird with the TPI 5.O. ……with a stick. Damn near impossible. I like your approach. Clean and powerful.

saving up for one now, definitely one of my dream builds

definitely one of the cleanest ls swaps ive seen for a 3rd gen, planning on doing the same to mine, I hope it looks half as good as yours, If you could do a vid on your gage setup and how you did it I would love that. the stock ones in my car are very faulty and I want to make my interior look like its from a new age such as yours. also what type of seats do you have?

Now that is how a 3rd gen should look these days. Amazing! This was my first car ever and i would love to do this in a few years. Incredible build.

Very nice I had an 87 purchased brand new boy do I wish I'd kept it,especially after seeing you and LX MATS Camaro both very nice 👍🏾

Oh snap im in mpls. I always get excited when I hear car guys live in minnesota. Would love to see this car around.

Definitely very nice. Can't wait to finish mine

Beautiful car, the under-hood is perfection, just found you. I have been watching LSXMAtt for some time as well. I am starting my swap / upgrade this year finally on 83 Z28. yours and Matt's etc. videos, are a huge help. Cheers!

Awesome content, POV Startup and Inside Camera is 🔥

Absolutely Beautiful

Nice I have a 85 Iroc Z28 t-top I have to restore. Hopefully I be able to start on next year.

Nice getting ls3 in my 89 iroc right now probably will be done in 2 weeks

This car looks and sounds amazing!!

I can never do this Sick build on my 89' Camaro RS. Currently restoring my 70' Firebird.

engine bay looks fantastic, better than factory. Super clean. Bravo

Very nice, I love the wheels too. I used to have a 91 Z28 5.7 back in the day, couple of 5.0 IROCs too, but I really want another black 91-92 Z28 with a LS7/T56, but any LS really would be fine even a 6.0 or 5.3

Wow and you picked the only color a third gen should be🔥

Nice build. Bought a new third Gen, same color, same rattle tops. Was kind of disappointed in that car. This is what I always wanted in mine. Good job.

Your Third Gen turn out real nice, Thanks for sharing

That engine bay is divine

Not sure if I'll swap with this engine. However, I am working on acquiring a junk 3rd Gen Camaro for cheap so that I can flip it. The fact that you can put a newer engine in an old car is proof that it's upgradeable.

Beautiful 3rd gen Camaro very very clean engine bay

Man, this really helps give me motivation to try and finish mine.

A perfect upgreat for the iroc, red just match up with iroc, very good video,keep it up, take a good care the iroc, iroc it's a icon

Sweet ride! Cheers from one MN 3rd gen owner to another!

Man, that thing is getting it. Super clean build 👌

One awesome build man,I love it,I wish I could find a big glossy I would frame it and hang it I'm the man cave I'm getting ready to build again one awesome job

Fantastic work!!

Fellow IROC owner of a 89 keep up the good work man.

Beautiful beautiful

Beautiful car and awesome build!

Great Build love it

I like it. You did great work.

Beautifully done

Nice 3rd gen, very clean. I have a 84 Z/28 with just 19k on the odometer. I have a all aluminum Ls1 waiting in the wings, just need the time to start working on it. Keep up the good work and videos.

Excellent build!!!

AWESOME BUILD !!!!!!!!!

Quality lifters and noise will go away. I had that same issue in my 4th gen. 229/244 duaration 630/615 lift. Quality lifters made a world of difference!!

Love the build bro🤝 Probably the best I’ve seen🏁

Very Nice lookin Iroc man, you did a really good job!

Is that an all after market instrument cluster? That was a job.

Great looking car love the swap when done on the right cars!

Every iroc needs iroc z wheels it’s a have too

If I were to build a third gen I would build one just like that awesome Camaro

Nasty build I love it I love it I love it. Clean

sweet ride!

I love this car! I have a 91 Z28 and its nice enough to win 1st place at the only car show I entered it in (just under 300 cars), but this thing is a dream with that engine bay, brakes, new seats and those wheels. I need to buy another Camaro and do this. Mine has a 350 with a Comp XFI cam 218/224 570 lift on a 113. Promaxx 183 heads, stainless long tubes, TPIS Miniram, TPIS 58mm throttle body on the stock bottom end (40,000) miles. Its black with red 92 heritage stripes. I kinda hate to undo all that's been done. I just love the 3rd gens. Whoa! I just looked at your cold star video and found out you're from Minnesota. I'm in Grand Rapids, MN. Any events left you would recommend. We just had our two cars shows July 24-25th. that's it up here for the year. Let me know. Maybe I can attend and check this car out in person.

Yeah top shelf, great job!

Hell yeah that’s awesome 😎

👍🏾👊🏽🔥🔥🔥🔥🔥 engine bay looks amazing

Sick camaro looks great looking for my swap to look the same

Nice 3rd gen I like these way more than the new camaros

I had an 85 z-28 that I built a 350 for, I built it to 394 c.i. vortec heads Slight work,rpm airgap slight cam stock slightly altered rocker arms, quick fuel technology race specific 750 cfm manual secondaries, 5 speed stock & 323 posi. Sold it and regret it still.

Noise is from the GM lifters. Morel makes the best bang for the buck hydraulic lifters that are far better than Ls7 lifters.

Great build brother! Very well detailed and clean. Keep up the good work, it has paid off. This was my plans for my ‘86 Iroc but, ended up selling it to a friend. At least is still know where it is. Lol

Looking good man! Keep up the good work

Love this car, I love the tail lights and the engine bay is awesome, so clean. I have a 2014 Camaro SS that I would like the engine bay to look as clean as yours. nice job 👍

Just one supercharger is the big bomb sure

Looks awesome. Looking forward to seeing some more videos. Love to see what it does on a dyno.

Very nice!!!

I like the car...But the factory Iroc rims look so much better than any aftermarket rim anyone can put on these cars..

Nice Car I had an 85 for 20 years that I raced. Should have kept it. If It had a/c she would be perfect

I have a red iroc that I recently put a zz6 efi crate 350. Its been a nightmare. I have a tick on the driver side of the engine. I dont know if it's a bad lifter, or a loud fuel injector. The tapping is causing me a ton of stress after spending all that money. I also thought maybe it could be low oil pressure. I had a Mechanic adjust the valve train and bring it down to zero leash and then a turn. That didn't help either. I could have bought a blueprint engine for half the money and probably not have all these problems. Last time I buy some junk gm puts their name on.

Nice, third gen is best looking Camaro I had 83 and 86 berlinettas cousin had 87 iroc

Looks great! Gives me ideas for my 87 transam.

Sick build dude

Looks great!

My favorite build . Love it all. Especially the wheels. Is it for sale. Why are mist of the iroc for sale on East coast? I'm in Houston and can't find one for a normal price. Send me a link of wheels.

Y love it the cars is m'y favorite camaro z28

Very nice car. I love the 3rd gen camaros. I had a 91 Z28 in the early 2000's. I totally regret getting rid of that car now. One little thing about the car and it is totally my opinion alone. But the corvette engine covers should be taken off. The look of a good ls engine is awesome. 👍👍👍

Beautiful beast 👌🏽

I'm too third gen IROC Z owner. I was impress with your car, very nice. Especially, the LS3 motor, wow. I notice you upgraded to new rims. Are selling the IROC rims? What size are they? Thanks

Bad ass car! I wanna see some more videos of it on the road! I’d like to put an LS in my ‘92 Camaro, but I’m not a mechanic by any means. I’m guessing the cost of the labor for someone to do the install would be a lot.

Wish thats what they originally had, very nice car. Id lose that LSX emblem on the back, thats a dead giveaway, you need to make people think its a crossfire 305

Absolutely love it 👍🏾👍🏾

Nice ride!

I love this car so much! I have a 89 rs I bought for a dollar. Is there anything you would say to do first. I would love mine to look like this over time.

Clean affff 😍

Beautiful Clean .. Look What’s up Brandon .. I just bought an 86 Iroc looking into an LS swap overall what was the total cost engine / Tranny / Suspension

What are the part numbers for the radiator hoses and the size for the hoses going to heater core? Awsome build

One bad ride ❤

In France y love it the cars yeee brother

Love your build beautiful car 💯 I’m doing the same swap don’t know how or where to hide the pcm where did you put yours at ?

Love the car! Looks so clean

I had an 87 IROC that was the same red as yours. Mine had the tan interior with the "gold" factory wheels and decals. Kick myself in the ass for selling it back in 2000. Now they are worth good money. Back in the day, you could get a nice one for like 5 grand. These days shitty ones are like 10k.

I need to look up what year the master and booster are. Way better looking than the stock unit

Any videos on the wiper motor install ?

Thank you for fast reply, 18 is the size wanted too. Well I'll keep searching. Another question concerning your radiator: how many rows and what brand do you recommend?

Pretty nice Camaro you have there, you want to sell it yet? You are in Minnesota to like me.

Next time, cut the music and queue only the engine noise. I wanna hear raw undisturbed audio ;)

Nice build. I got a 91convertible with a ls3 I was wondering what transmission did u go with

Clean!

Man i got a 84” z28 i wanna drop a ls3 in it 😎