Lynx Tips, Tricks, & Tuning Guide 

One recommendation I might make to you all, especially if you are having issues with flubs is to get a slightly larger sized nylon thumbscrew from McMaster Carr. The ones included in most kits are 1/4” in thread length, which is okay, but if you instead get the ones that are 3/8” thread length, it allows you to put a little more pressure on the barrel which also helps put more downward force on the catch bars and assembly. Those of you that have issues where you pull the trigger and it doesn’t fire, tighten your thumb screws first. Also if you upgrade to a shroud on the front, the 1/4” thumbscrews are a nightmare to insert and remove, and the 3/8” nylon thumbscrews you’ll find are the perfect length. Great basic Lynx troubleshoot video Luke!

My personal tip to pull the plunger without taking the tube apart from the turn around- remove the spring and reinstall the pump/catch, then just pull it out. Takes 30 seconds total.

Oh Luke you might also want to touch on all the places to apply Slug Slym. One that you didn’t meantion was actually the catch and you can lubricate that with the priming bars all the way forward through the catchhole. After extended periods of use, This will also help ensure if the catch is sticking on shots, that little bit of lube will help it release the catch.

Love this video and concept, very helpful! It would be great to see something like this for a skewer by you or someone. Just the basics for tuning and maintenance. Haven’t found anything like that yet.

I'm guessing these tips translate to some extent to all blasters but sure would love a sort of 101 blaster care/maintainance video. The least invasive ways to get a little better performance from a stock blaster. Both spring and if applicable also fly wheel blasters. Thanks!

I’m ordering on of these soon with a crooked cousin as an under barrel launcher

This blaster is all the way perfect.

Just built my first lynx the other day. It snags when I prime it. It is smooth kf it doesnt snag but i feel i have to angle how i hold my foregrip then pull back. Got the hardware kit from OOD, printed parts are from Kyle of Pinkdragon Tuning

Very helpful, if I got one. My only question is what is the performance of each spring listed, and what does GREY ANNODIZED bars do to the blaster?

i have a problem of my big oring in the plunger always shrinking and not sealing the air in. idk what causes it to shrink because it happens often.