MAD OFFSET - Flipping the center on Steel wheels 

I did something similar today with a set of wheels. 2 things: this is labor intensive. And this guy knows what he’s doing.

Did this 60 years ago when wheels had rivets in them, nice job !

that's pretty good , been doing it for 32 years now . nice to see someone still pick it up.

This is one of the coolest mods you can do on a cheap car IMO. So inexpensive, but makes a huge difference :D

your the man! I'm taking 2008 17" dodge ram steel wheels and doing the same thing for my 1965 ford f100. you made this look as simple as it gets.

Holly shit!!!much easier than widening....so much easy! I will do it myself next week!thanks man

Amazing what the offset does , it looks so much better . Pretty cool

alot of effort and time into those wheels nice work love the idea

Very impressive ❤

I really like that look 🔨👍

WoW Never New That People Still Do This I've Heard Of It But Never Seen Anyone Do It

Amazing, never thought of this , great video and thanks for sharing..

Superb job

I have 6 lug chev 16 hole rims need a little bit more lip was thinking about it two days ago and came on to this video thks

Beautiful :)

That looks mint

Started doing this on a set of 16" Ford C-Max/Focus/Mondeo Steels. Doing two for the rear of a '71 Beetle (modifying all four Hubs for Discs, all Drums at the moment). They're the Riveted/Spot-Welded type, so no cutting/grinding involved, and the holes drilled aren't large enough to need inserts welding in. I'll be able to just offset the holes, and weld inside each one onto the surface underneath. Got one separated, but managed to partly flatten a section of the Rim edge when pressing the Centre out with a Hydraulic Press, must have drilled one of the welds slightly off-centre. Luckily I have a set of four to get two good Wheels from. Fronts will be matching 'Space-Savers'.

Pretty cool

Super. The valve hole still needs to be turned to the other side ...

Creamtube, this was few years ago now. Are you still widening wheels for Volvo 740? I've seen alot of the new Ford Cars now come in 5x108, I think the Ford Fusion wheels with flipped barrels would be perfect look. Maybe widen to x10, as I think factory is x7

Nice

Cool!!

My father told me about doing this when he was a teenager 60+ years ago.. They were rivited vs. Welded back then.

very nice man! how did you balance the rims?

Dam.... that’s awesome lol

Hey don't get me wrong bro, looks like a lot of hard work and its actually impressive for sure. I didn't realize you were welding lol i thought you just pounded those in and called it a day haha my bad bro

Wow cool idea. I would have liked to see the welding and finished product in the video, but excellent work none the less.

My question is what tire did you put on it did you go low profile on it? And great video.

Land Rover rims next 😎

How do you air it up? did you drill a new whole for the air stem?

How much further do the wheels come out then when they were stock?

great video

I done this once years ago I just couldn’t get my center part center the wheel had a little wobble in it quess I bent the center trying to get it out

Thnka mate

nice

This vid is awesome. Not having luck getting steel rims tho.

How did you get the face leveled for it to be welded back on? Did you mark it?

amigo yo estoy intentando hacer el aro así como ese que usted está haciendo pero usa como dos potones en cada lado de los cuatro y no me deja quitarlo

I have rims for my F250 with no centers. I want to have centers cut and weld them in. How accurate does runout have to be and how do you align the centers with the rim when you weld them up so they don't wobble? Thanks

Ficou Bem legal Chuck

doing this on mine right now but how the hell did you get the center back in lol having zero luck getting it back into the barrel

Interesting valve stem location.

So many people in here just mind-blown that the valve stem is now on the inside LMAO. Here's a thought if you're concerned - DRILL A NEW HOLE!! I know crazy right? Who'd have thought! 🤯🤯🤯

👍

when u drive did u feel any discomfort by the way nice look

Är det 850 eller V70 fälg du jobbar med? Håller själv på med 940 fälgar på de visset du gör men dom går inte att göra så med för hårt pressade

How did you welded it?

What AC rods would you use for this ?

Cómo te aseguras de que queda bien centrado?

Valve stem hole was welded shut and redrilled in correct location.

I have a question, Does it matter if the airvalve is on the inside of the rim or do i need to have it on the outside? I see in the video that you got it on the inside Love the vido btw!

Wery nice. What numbers did you gen on the alignment machine?

When you did this did the back spacing change

Wouldn't it be similar to run the wheels backwards?

And what about the valve? is he going to be on the back side all the time and one will have to take the wheel off or lift whole car to check tire pressure?

I may be wrong but isn't the tyre valve now on the inside? Looking at the end of the video it is. That's gonna be a nightmare if needs to be pumped up

What-s the tire dimension before and after? Thx, great job!!

Looks like the valve stem are now on the inside side of your wheels.

can it redrill for valve stem then old spot put valve stem and just refill air on new spot valve stem ??

Im on the west coast America 150 miles north of L.A

Te białe skarpetki super 😂🤣

That's an awesome job.

should have applied minimal even heat too wheel outer and centre would have dropped out, nice work...

Im looking for somebody to change 14x6 to 15x8 using the same centers.

This called the old switcheroo is it not does any one have any more info on the cultural aspect

how the f do u fill your tires with air? the valve stem ended up inside...

Can this be done on a 2010 gmc sierra 6 lug?

Sorry i dont know what e.t. is

Will a car be able to turn after this?

rodas massa mano

Yup, but does it clear the brake callipers?

doing this to my bicycle

how long did this take to do?

1:34 hubcaps, anybody?

The hard part has been carefully edited out.

usted no me puede ayudar en poderme dar una idea que poderlo quitar

wait do you have to weld it? I know its a stupid question

well, I guess I don't need to spend money to get diamond steelies

did you have to weld it back on again?

trying to make some to sell need these in 5x108

How did your guarantee it was true?

Nice, now you fill up the air from the inside lol

Can you do a more detailed video? this looks pretty cool but I didn't understand what you did

only issue is now you have to fill up the tire from the inside, no? so it wouldnt be practical for a daily :v

Wheres the video on the car and driving?

I would use them inside out, budget diamond steelies.. lol

they used to call them reverse wheels. Too bad you didn't show welding them back together.

Were these wheels off a front wheel drive car?

Looks great.. i only see one issue!.. checking the air once wheel is fitted 😔

So good?

Thank you for this video. Are they strong enough for off-road my friend? I will use your method on a set of shitty suzuki vitara steelies. Ha! For a mean look!

Is this bad for your car? Any dangers to it?

by the look of it you need to pump the tire from the other side

Is this safe?

i cut the welding but the center don't want to fell. i cut the weld like you.

Mera bhi kam yehi hai bhai ji rim banana ka hai

where's the wire wheel when you need it

How do you add air ??????

Pumping it up may be a bother 🤓

Hi, is there any way to contact you... I think someone could be using your video as theirs... Search this video called "como invertir plato llanta chapa MUY FACIL"... Is the same video as this one except that it has Spanish subtitles...