Magnetic and Dielectric fields of the Bifilar Coil Visualized 

I have always wanted to understand it but no one has explained it like you do thanks so so much

I love the way you explain things Master Ivo, you always start from the basic principle and it's very important not to miss any information in passing, to understand the two-wire coil before you tackle the electrical circuits and how to use it. :) You are the best I thank you for all the quality of your work and all the personal time you invest for those who want to discover this unique type of energy.

3D visualization!! Amazing addition Master Ivo 🙏

This was brilliant! Very well explained. I feel like I understand how the coils work now!

If I may inject a slightly different understanding of my friend Nicola Tesla. In his explanation of the actions of electrons and coils, he sometimes often uses the term capacity and capacitance interchangeable with more general terms we call amperage and voltage impresses, and not distinctly with the modern term of capacitance as in a device we call a capacitor. Often here his meaning in general understanding is simply the activity of the coil has the capacity to increase the flux potential of power, i.e., voltage and or amperage.

Excellent work. This is the first lecture I have experienced using VR. Thank you!

I really appreciate your lecture, l went through school in 1970. After my degree, I taught in a local college. I have forgotten most of my education in electronics. I'm still interested in learning more, [ha ha] is good for me. Thank you!

Interesting. I read a few times this patent, however, the fact that you have put coils side by side, it's really easy to see the capacitor. Thanks for that!

In my Tesla research, I discovered that Tesla purposely left key elements out of his patents after realizing they could be used against Humanity.

Thanks brother, you make it easy to share with those whom cannot visualize. This would be a great teaching aid. Look forward to you next video. Peace and Cheers!

Another term used to express what occurs within a bifilar winding coil is “constant shear force”. The electrical shear force is constant all the way around. I have tested bifilar winding coils versus conventional winding coils, as near field antennas. The difference is stunning. Bifilar is about 10x more effective than conventional.

Wow! You explained it all very nicely. Great video.

Excellent video. Love your insight and the VR presentation. Thanks for sharing!

9:34: Hooking up the red to blue and blue to red is like an electrical Mobius strip! Wow!

Nice vid! Covered a lot of field theory there, was great to see. Looking fwd to next instalment!

By connecting the two coils he is basically making a magnet because the fields now end up being opposed in direction to one another, and not as you have described as ending up in the same direction. At the start you show the magnetic field of the single coil as being opposed to itself in direction on each side, but it should be in shown in the same direction (as steinmetz says, these are connected in reality so they are in the same direction). This is quite important because with the adition of the second coil (and shunting the wires) Tesla is essentially making a magnet out of the bifilar coil (which is now become one big wire). This means the fields are now coherent and in reverse phase to one another this is what makes the dielectric manifest stronger

Wow I appreciate your newest video display skills. Great job sir.

Nice work. Great VR display.

Great insight. what's the resonance frequency if that sorta LC created by the bifilar pancake coil?

Amazing. You continue to blow my mind

you have simplified what Tesla said in his patent. its a great work. i understand it better.

Thank you! that's how educational videos should be, clear explanations with drawings, just donated!

This are principles of step up energy via manipulation of flow and compression of voltage through a series of more friction to produce more resistivity. The mangetic forces should fallow the ideal concept of plutonic symmetrical shapes, and shapes should be made according to the desired directions and interactions of the magnetic fields. The key is all about having the right shape and symmetry to modulate and control energy both in the form of vibration/sound and electricity/voltage. Interestingly enough, none of this science is new about fractal and plutonic shapes and assemytry is energy manipulation. Ancient texts, temples, display such knowledge of cymatics and energy manipulation through shapes and proper elements.

Nice explanation Ivo :) I like the way this is going.

Awesome information you have given us. You are very appreciated. Thank you!

Master Ivo you da man!

You are amazing. I'm a new fan. I'm bog on Voltage and Dielectric Fields.

6:14 there are still videos of Schawberger's vortex geometry models available on youtube. 13:52 Schawberger used 2 counter rotating copper plates to create the same effect in the middle, I think.

Thanks Master Ivo. Please go ahead... nice VR visualization. Waiting for the next class. May God bless you!

Congratulations this is top notch stuff.

Love the CG on what looks like Oculus?!? Great video as always and very glad you are educating people about these things

Good explanation of a typically hard to interpret Tesla patent. Good job. 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

The Tesla bifilar coil is better understood by stretching it out from a spiral pancake into a cylinder. Then you can see that it is just a centre tapped bifilar coil and behaves like a close-coupled auto-transformer, which would normally have the two windings end-to-end, but in the bifilar version the windings form a double helix, with close coupling, just like the Tesla coil.

Build it and you'll see! The patent is for a novel component, a "Coil-pacitor," a resonant coil with immense capacitance. Boring? Simple? Not exactly. Any Tesla secondary-coil can do the same as this invention. But this one is VERY SMALL. It's a miniaturized version ...low frequency without meters-wide secondary coils. High stored joules, but in a tiny package. A novel discovery. If it also has any weird physics hidden inside, that's a bonus. But that's not needed. The trouble with VLF-band high-power devices is that they're HUGE. Put them under oil, for high megavolts, and they still must be large in order to attain low-freq resonance. How do radio companies do the same? Make the VLF resonators physically small? They add an external HV capacitor, which introduces all sorts of problems, as well as being a large added component. Tesla does it differently: distributing the added capacitor all through the inside of his secondary pancake-coil. (Note that we could build a cylinder-version too.) These are power-processing devices, intended for pulses at high rep-rate, for high average wattage in a very small package. If Tesla was inventing 100HP systems to go inside aircraft, or in vehicles and trains, or even human-carried, then SMALL WEIGHT IS EVERYTHING. (Note that 100HP is roughly 100 kilowatts. Can you build a 100KW tesla coil that's the size of a car engine? This patent shows us how.) On the other hand, this device really needs to be submerged under oil, to attain immense voltage. After all, the first HV end is being placed next to the low-volt terminal, before spiralling back in as the second half of the winding. Build a copper-foil pancake TC, with close-spaced turns, in a small box under Tesla's "boiled linseed oil."

Thank you for explaining the vortex

i love you man watched one video and subscribed, you explain break it down then expand. wish some of my school teachers would take the time. cheers!

Very interesting idea, higher voltage increacing capacitance,. no wonder he used them to drive the secodnary and terceriary winign of his tesla coils, to allow greater spikes and discharges, vs expensive regular capacitors. especially as the field collapses itd help give the shove to the top of the tesla coil and electron bank, /dome at the top to radiate out

It seems that this is a thermopile/condenser in one. Tesla worked a lot with steam and I'm thinking this was probably his way of recycling some of the lost heat energy. By passing steam through one coil and any heat-conducting liquid through the other, and the two being made of different metals, you can pull current out by the process of transferring heat from the steam to the coolant. Or you could probably achieve better results with no coolant at all and just a solid metal drawing the heat off. Copper tubing and aluminum, for example, with two metals shaped to touch with the greatest amount of area, flat bar and tube flattened on one side, for example. And water and steam flow would increase current. I'm not sure if my idea would even work however, as a thermocouple requires a heat differential between two connections. But that may also be the magic of this coil, perhaps he found a way to turn such a connection into a very long thermocouple that produces like a thermopile. Or, perhaps it is a capacitor fed by a special thermocouple. Another possibility is steam through one and the condensed fluid through the other in the opposite direction. Thus the temperature difference as well as opposing fluid directions would generate current and with an electric insulator but heat conducting layer between, build a voltage to be drained off. But I'm just throwing mush to see what sticks for someone else. I don't know enough to speak with authority. It seems to me, a mere capacitor could not be what this is, but since he mentioned replacing a condenser, I'm thinking a thermocouple/capacitor charged by steam since it is also to replace a condenser.

i from brasil, amazing video, the best.

Love the VR guide. Thanks. What is the craziest thing you think we could do harnessing the power of the dielectric field?

Thank You Master Ivo your teaching method is excellent you made me understand the bifilar coil I get it

Bifilar windings are used to minimise coil inductance. For example in wire wound resisters

Great video! Two questions. 1) what impact does the insulation of the wire play in terms of capacitance (and so, energy) and 2) at what point does the energy overcome the insulation of the bifilar coils? Does it lead to arcing?

Is there a "tuning" aspect to optimizing these coils based on the wavelength as well?

If I understand your explanation correctly, the dielectric energy of the bifilar coil increases with each volt we apply to it Earlier in your video you measure the capacity of your coil at 697 Picofarads and at that moment the measurement is taken while the serial connection is open, this was in order to demonstrate that the coil is a capacitor already without even the closed serial connection. Can't you measure the capacity of the coil if it's in serial connection? If the dielectric energy increases to the square of the potential applied in series connection under any speculation this may be an indication why Tesla explained a way to transport energy that could be sent anywhere on earth with very little loss because the more we increase the input potential, the greater the distance to the square of it. The distance of the dielectric field is very large, much larger than that of Hertz which is limited by the distance. So in summary if we have a quadrafilar coil of the same number of convolutions applying 100 Volt of potential as a bifilar coil with the same characteristics we will have a dielectric energy 2X greater than the bifilar coil . If this is true to increase the energy of the dielectric field we can either increase the size of the coil by having 4 wires instead of 2 or we can simply increase its voltage at its terminals the most economical way is to increase the number of volts however both paths are possible. Thank you Master Ivo

Master. I know this is an old video yet a very good video ⚡🙏⚡ I wonder what your thoughts are regarding the Rodin Coils? Although Marco Rodin Employs Tesla's Vortex Math I am extremely sceptical as he never mentions an associated frequency nor Inductance.

Very good. Thanks 😊

Would a spherical coil work? Or do they have to be disc like?

Very cool... but the phase of the dielectric and magnetic as they change... and how external fields interact is where the real magic is... can you animate the 3D? For example, as using this as an electromagnet in a motor, a changing magnetic field does not produce the standard Lenz law effect. And as changing electric current flows through the flux-capacitor, it acts as a series LC circuit with the C dominating with it dumping first into the wire, then the current flowing and producing the magnetic field... which sustains the C... net effect, resistance... with the potential for resonance, or negative resistance... Or do I have this wrong?

There are references to Walter Russell being a close and a long time friend of Nikola. After getting lost with Walter, I reread some Nikola stuff and ... wow! Much recommend looking at both: Walter AND Nikola. Super vid.

I think why Tesla didnt specify usage of some of his patents is because it might be that his patents are part of his whole system. In other words its applicable to his other patents. What people dont uderstand is that Tesla was talking about effects that come onto play on high potentials (and high frequencies). They can not use logic of low voltages. Coils can be used as resistors or capacitors in domain of AC currents. Tesla seems found a way to exclude need for external components to the circuit by this method and made it safe for use even with extremely high potentials. By distributing capacitance evenly that makes sense as use of external component could be dangerous to store all that energy into separate capacitor. Great video.

Tesla discovered methods of utilizing the aether and creating longitudinal waves which they themselves [the aether] create a much great potential. The DC pulse of high potential does the work. Very nice graphics. I'll say again what a different world we would live in if Nikola Tesla had been allowed to succeed.

try placing two of these coils about two inches apart and ensure that the produce N to N in the middle. fields will then be crushed with an open space between them filled with uncharged Ether. No use coils plates in the middle area and see what you can get for energy. The flux and Ether start there flows from each side of the dipole outward then back to the opposite side.

Just want to add about Tesla bifilar coil Health benefits.If you make from two pieces 12 meter 0.4 mm magnet wire bifilar coil but not on plastic just use tiny wood board.Don't do joint between end of first with the beginning of second.Take signal generator with output 0.3amp 0-30v conect one probe on edge wire and another probe in center of another wire bifilar coil. Use sine signal with amplitude 20-30volts and find resonant frequency it's gonna be between 250-300 khz this is the treatment range.And need keep on the chest around 30 min.It gives an incredible effect.

Thanks,nice explanation.

The coil is related to [Tesla's Occult Space Propulsion Technology] and was central to the development of his flying machines that could stand perfectly still in the air, in the middle of a raging storm, and travel pole to pole in 15 minutes. The other book to read is [Pentagon Aliens].

Thanks Master Ivo, it's the perfect class room! Thanks Tesla too!👏🏻👏🏻👏🏻👏🏻

Nice start...your ready to roll grasshopper...

Hey Master Ivo I've been learning electronics for the past few months and you're videos are awesome for that. I was wondering the other day, could the dielectric force actually be an absence of electromagnetic force? Like creating a vacuum or void that is no longer holding the emf back and so it rushes in. Kind of like if you dip a dry cloth in water, the voids will become saturated through capillary action.

🇧🇷 Friend, admirable your work in this video, thank you very much for your excellent explanation. 🙏🏼 Note: I remembered the Joules thief, it would be possible a video of you explaining this circuit, Joules thief and see what you could have in common with Tesla's bifilar coil.👍

Excellent explanation!

Hi Master Ivo, your concise videos rank at the top of most others that I have come across. Thank you very much. Please, I am still struggling with how to build a bifilar coil with two different wire gauges. Specifically, at what point during winding one gauge wire does one begin to wind the other gauge wire?

What effect would this have in a generator? As in if the coils of the stator or rotor were Bifilar like this?

Great way of viewing the relationships. Have tried animating them, as all is on the move. Did Tesla try a Mobius like relationship? The system are elliptical, through a directional bias.

At 13:05 the capacitance of the wire itself is 679pF but earlier at 08:33 the coil was connected serially to itself thus its plates are connected I can clearly see them connected at 13:25 so the stored energy must be different.

Hello Ivo, does a coil wound from two wires A-A1 and B-B1, but on a spool with core dimensions of 32mm diameter, 35mm length, and an outer diameter of 75mm, with connected ends A - B1 and free ends A1 - B, have the characteristics of a bifilar coil?

True internal power of Capacitor in short -we could discharge capacitor inward instead of outward, and inward voltage is higher then outward, by a lot. When tiny wire ascend to plane between "+" and "-" plates of capacitor, its concentration of charge would increase(therefore voltage on them). And when charge reaching midst plane between "+" and "-" it could effortlessly leave capacitor through (within) its plane (because distance to "+" and "-" equal in this plane) ====== What if charge on capacitor plates could leave capacitor effortless and unleash its true power. Which usually foreshadowed by nearby opposite charge (push mines pull(outward force)) But inward force dont foreshadowed and have all of its true tremendous strength(as if its solitary charge) And its strength isn't a joke , at all! If we could remain it intact and go outside with it it would be a great output power(output voltage), could we? And we do have such a place for charge on a way inward(from capacitor plate) , or better to say such a plane And it right amidst "+" and "-" plates. Charge could move within this plane effortless (because distance to "+" and "-" is equal for any point in this plane) So charge could maintain all of its true power and leave capacitor within(through) mid-plane (as far of capacitor as it want) Its mean we might obtain great power then Because we pull in low voltage and it push out high voltage (with the same quantity of charge) How it might be done :) Just tiny wire which descend from "+" or "-" to midst (between them) and wend aside through mid-plane through with all true voltage. Concentration of charge when it reached amidst would be great , meanwhile there no force to hinder it within mid-plane:) Therefore we may see that voltage actually rise in a way inward and lowered in the way outward Its just mind-blowing (really unexpectedly) ===== 2) ===== HOW MIGHT WE OBTAIN ENERGY from SURROUNDING TEMPERAUTRE MAY WE? Might we built thermal motor with 100% efficiency? This model SAID yes , how? Read below and enjoy the journej (and therefore have possibility to obtain energy from the surroundings without consuming some fuel though in theory) (let it be in the vacuum ) Shocking but fact - this motors already convert 100% heat energy into pover BUT!!! (how it might be without it) in the First Stage when it expand to the point where temperature equal environment temperature (simple machine which consist of piston , cylinder, gas inside it) In the Second stage we should compress volum emiting heat to the environment with the same temperature what environment has and therefore waste energy (even nothing to contain thermodynamic allows us contain overheat without effort but in this case we dont have overheat) So if we can avoid second stage we can save efficiency(and it might remain 100%) And solution how to avoid waste power of compressing gas is... :) Dont use GAS ! we might USE LIQUID heated to the boiling temperature (boiling temperature depends on pressure on piston, let it be atmosphere pressure 1 Bar/100 kPa) So we boil water, expand volume with 1BAR pressure, supply heat 212 F/ 100 C in the process, then we store remain warm(overheat if compare it to the environment temperature) And - without effort return piston to the start position(thats it, all what for all of it, this key component, we got it) In the next stage we return stored warm into system and supply additional heat intto the system And repeat it again and again never emit any heat to the surroundings All warm eventually would become power. We heated water, we get what we want(power) we store remain overheat to the storage with 0 effort in order to use it in the next stage, and repeat we use heat in storage , then supply additional heat and repeat it again and again without waste of energy therefore all warm energy will become power even though not at once (thi is idea) if we talking about water , temperature of boiling water is 212 F/100 C Coefficient of efficiency may be something around 4 (0.25 points input power to obtain 1 point warm energy) And all iof it as we could see , might be converted to power another words input 1, output 4 , difference would obtained from surroundings warm (another words it may be little bit colder if then) === 3 === And let's see another one oportunity What if magnet field(force what affect the straight section of wire per miter(not coil)) might be almost constant, as weight force per kilogram near earth surface. So to obtain interaction similar to straight section of current we should stretch opposit current away from us. (we dont deal with this bullish... North and Sourth mythicale poles, its just interaction between parallel currents in plain) If source of force far enough and its force enough powerful we may obtain almost constant force per 1 weight/current/charge But what means dB =0, it literally mean that opposite Voltage U=dB/dt = 0 as well, But its only concerns motor without magnet in this case because F*L still the same and we don't elaborate some method to turn off magnetic domains yet :) Additionally if that "far away current" wasn't a permanent magnet rotation of our motor stil would be induce some very tiny Voltage, which means it should require Voltage for insane amount of current. But luckily we may use permanent magnets. ------- Another similar model is model which consist of battery, resistance (R=1) and electric transformator but not like letter O but like I , lust straight piece of ferrite. Type of signals "quadrupol" U =1 I(current) =1 So we have battery 10 volts, 10 amps, consequently attached resistor and transformator But transformation would be afeccted by the current, thats why we were include cylindric magnet around transformator to compensate 10 amps current. ----------- So without input supply input power to the trunsformator we have 10 Amps 10 Volts = 100 watt When we turn on transformator input will be then 11 amps 10 volt from battery, and 1 amps 1 volts from transformator = 110+1=111 Output heat power in resistor 11 volts, 11 Amps =121 watt 121 >111 , we get 10 wats more BUT! lets see what would happen when we replace permanent magnet to coil wit 10 Amps, 0 Volts We should maintain current when transformator turn on , and therefore our Voltage will be 10 Volts. HERE IT IS -this 10 wats waste Therefore we see that permanent magnet could gain power into system by just remaining CURRENT the same Nowhere saw describe like this, though idea quiat simple It might be good if in the world be more pure minded volition people

Thank you, very interesting and well explained

3 One is the SG3525A which is a ‘all in one’ astable chip that has both frequency and PWM control, for PWM read about the comparator, it seems straight forward but also look into it. The next ic is a fav of mine at the moment, it’s called the CD4047B a dedicated astable chip that is more simple and old sckool. But does not have ‘dead time’ built in. The only problem ive had with dead time is people trying to make me dead in a timely manner and discovering in various painful and horrific ways that it’s not achievable, I know what you’re thinking ‘how horrible’ I use to think this way, but now I see it more like a zombie game, I mean you would burn a billion zombies without a blink in a zombie game no? Anyhow the point of these ICs are your missing link, you need an astable output, that is to say two alternate pulses, then on one of your inductors create or wind it in two halves so you have a center tap then low side switch each side so that you have alternate pulses. This creates a rotational polarity inertia in the core and and b] inductor At resonance you don’t need to worry about dead time. {in my experience } So with these things , more inertia, and a actual rotating polarity of that inertia, I think you and others can take the game to the next level. Sending my warmest regards AtarLC

There is such an idea. Instead of a conventional dielectric, use a piezoelectric. Then, when the capacitor is charged, due to the Coulomb forces of attraction, the plates will be attracted to each other and compress the dielectric, which will generate an additional charge due to external pressure. Thanks

Remember this is the combination of a Coil and a Capacitor. it is not together to make it a Dielectric device. This is the illusion of the patent to fool those and go into the wrong direction. The field created in the coil is special, and radiates Torsion fields similar to Viktor Grav. It creates a anti-gravitation field in the metals it is attaches and becomes part of the circuit. The Torsion field is a bubble of timeless lack of gravity zone, hence time is at a stand still the zone. This is the time when Tesla was introducing time travel into his world of scientist up to the Philadelphia experiment in the 1930's that initially fail, but then was corrected and lead to the Montauk experiment interconnected in 1980's and the looking glass project of time viewing. So please be aware of why he did not include this in the patent as it is military info at the time. good luck and do your research to have all the info at hand when you do a video.

Love for more advancement for practical energy usage

What about a bifilar toroid construction? Definitely more difficult, but perhaps more effective.

Très belle video je vais la visionner encore pour bien la comprendre Merci

It's a resonant coil, This coil is what's used in cordless phone chargers today... also much like a split ring resonator in reverse.

Very amusing.

At the beginning, sounds like magnetic induction. V=BvL? Series resonant. Can't wait.

Do you have any idea at what the resonant frequency was he worked with? One question, it appears that when the center tap field collapse it will in phase with lower half of the coil and 180 out of phase with the top end using center tap as reference point. I feel the CEMF plays a big role in the inductive kick. Thanks great videos.

The 1/2V at 12:00 on the capacitor symbol should be V. As labelled on the spiral version, the open connection on the blue is at potential V. Half way between the red and blue plates it should be 1/2V as shown on the spirals.

Cool video. Nice explanation. What is the 3D program you are using? Looks nice

Try a trifilar coil connecting the outside coils and measuring the inner coil. This should give a power change .

This is currently my favorite channel on RU-vid. Absolutely fantastic work, Ivo. We would love to have you chat with us, at one of our @aethercosmology round tables, if you would have any interest in sharing your work with a group of aether nerds and flat earthers.

Really Awesome!

2 Now I want to focus on your own experiments I like you have done much labored work in this regard, So let’s translate part 1 to an inductor, most of what we see as ‘magnetic force’ is a type of inertia, but it can not exist without the tractor force. So to focus and to be direct, you have in a pancake inductor a inductor with not much inertia as it does not have much mass, this I understand is because you have been focused on the tractor force , but I have just explained it as and aspect of two primary forces and the tractor force acts to offset mass under inertia. So my suggestion to move to the next phase is get yourself a nice sized ferrite ring or two or 3 Now , when I wind inductors I experimented with T4 T6 and T8 , theses are 4 6 and 8 wires wound simultaneously then alternate connected , I’m sure you’ll work it out just keep connecting the non continuous wire. This as you correctly stated kind of ‘widens the plates’ of the tractor device that is part of the inductor, which will lower the self resonate frequency. Now the other thing you might want to explore that I noticed you haven’t got is the rotating. I could be wrong but I don’t think you have a rotational polarity field, this was a Tesla Key if you know his quote. So what you could do is get one of two ICs and familiarize yourself with them.

So, I stumbled across this researching for a new electric guitar build.. From what I read in the comments and understood from the video this is supposed to be a capacitor that doesnt open the cirquit.. Capacitors in E-Guitars are mostly used in Tone knobs by "sending" higher frequencys to ground making it sound darker.. I'm wondering if one could install such a tesla-capacitor in place of other capacitors, (Im pretty sure thats possible) or if there would be other practical aplications for electric instruments...? If you have any Ideas let me know

Check out theoria apophia, I think that's how it's spelled. He uses a phero fluid mixture in combination with LEDs to show the field at work.

maakt clockwise or anti clockwise rotatie uit?Verder super goed uitgelegd met beelden.

Hi, I have an odd question, and maybe hard to imagin, i am trying to visualize what a magnetic field would look like if I have two bifiar coils wound together into one coil , and they have apossing charges through them, will they cancel each other out , how will the magnetic field interact with each other, thanks

I'd say Earth ground connected on one side, big HARRP like antenna on the other, steel, maybe graphite plates on both sides of the coil connected to maybe an adjustable oscillator of some sort to light a bulb or power something.

can't I just put both ends of the speaker wire to the hot side of the dc voltage and the end of the coil to the ground side or vice versa? Would that mean that the capacitance is between the winds instead of between the top coil and bottom coil?

good job

But capacitor has a dialectic layer so does it imply the plastic of the wire make dielectric equivalent?

is the dielectric field a coulomb force or something else, such as radial motional electric field (see hooper and kyle kicker)?

​@Master Ivo in 14:48 please correct, as I understand, it is always half of the exponential increased in dielectric energy as in equation E=0.5*C*V^2 so: 100^2 /2 = 10 000 /2 = 5 000; 200^2 /2= 40 000 /2 = 20 000 so the statement is correct we get four times more but the calculation is not fully correct related

Nice explained, what can it be used for ?

And what happen if we have a magnet moving over the pancake coul will it induce unipolar energ as farsdsy ecplain with the water of the tsmise while he crossed a bridge wich mean generating little voltage but lots of amperage?

Sorry if this is off the topic but, how much would it cost for humans to build a magnifying transmitter, one big enough that could cover the earth. Time and energy and resources.

HOW would I be able to see magnetic fields in 3D visualization ???? Thanks

I think the coil should be made big, with many turns, using flat strips of aluminum, like a capacitor. Or ideally, a superconductor. Many turns will increase the voltage between the bifilar windings. If the coil is designed so that the resonant frequency is the same as its equivalent L/C circuit, it will maximize the voltage, current, and thus the resonant-energy storage. What good is resonant energy? It produces power for the required time to maximize longitudinal impulse.

The planet earth is also equivalent to a capacitor pole opposite the clouds. Kapanadze's solid state generator extracts electrons from the ground 😊