Magnum Power For @RobbyLayton Tow Truck! How-to build An NP 205 Transfer Case.

Подписаться 52 тыс.

Просмотров 87 тыс.

50% 1

In this video I build a NP205 and Offroad Design Magnum Doubler Transfercase. I will bring this down to ‪@trailmater‬ for Robby Layton's Tow Truck. This is a great How To for anyone getting ready to put dual cases in their rig or anyone looking to rebuild a NP 205 t-case. Side Note: The website www.coltbuildsit.com website is up and running for anyone looking to join the CBI team!! Thanks for all your support.
Like this video, maybe try these:
Chevy vs Ford: • We Invade Utah's Large...
Pacer Fail: • My 1976 Pacer Doesn't ...
Ghost Rider Offroad: • 3 Major Issues With Ma...
Axle gears on a Bus?: • How To Install Ring an...
How I Weld to Cast Steel: • How-To Weld To Cast St...
Partner Discounts to help get you on the trail:
20% OFF OnX Offroad Discount code: Coltbuildsit
10% OFF Yankum Ropes Discount code: Colt10
10% OFF EZFlate Discount code: COLT10
10% OFF Barnes4wd code: COLT10
5% OFF Affordable Bender code: COLT5
5% OFF Behemoth Drivetrain code: COLT
10% OFF Vantrue Dash cams: COLTBUILDSIT
Health/weight loss - ROOT: therootbrands....
Could you help me out and follow these too:
Need Swag? - www.coltbuildsit.com
Facebook: / coltbuildsit
Instagram: / coltbuildsit
Patreon: / coltbuildsit
Tiktok: / coltbuildsit

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 334

@Westerntraveler 5 месяцев назад

I am glad you got your own channel. I watched the whole S-10 build you do a great job of explaining the process.

@coltbuildsit 5 месяцев назад

Awesome! Thank you!

@wallygreer4931 3 месяца назад

You are a good instructor, you show not only how but why, so its easy to follow along if someone wanted to do the same! Great show, shows you really care for your viewers! ⭐⭐⭐⭐⭐

@coltbuildsit 3 месяца назад

I appreciate that!

@thisisatest2576 5 месяцев назад

@ 1:32 - I think you simply misspoke stating that one rotation of the transfer case input creates 2 rotations at the transfer case outputs for low range operation. It's the other way around - It takes 2 rotations of the transfer case input gear to get 1 rotation of the transfer case output yokes in low range. Great channel and great video!

@jeremywolfe5483 5 месяцев назад

I was thinking this too 😂

@CharlieB195 5 месяцев назад

Yeah, got the reduction backerds!

@isomer13 5 месяцев назад

Nice DIY. Can't wait to see the Pacer build. Thanks, Colt.

@555byron 5 месяцев назад

Colt, you do a great job in your build series. The S10 was an amazing budget build, I love that it performs so well on simple leaf springs. Can't wait to see the Pacer build

@555byron 5 месяцев назад

I also meant to add that this video is in that same category. The t-case doubler build on the S10 was exceptionally explained and interesting as well.

@bulletproofpepper2 5 месяцев назад

Rattle can paint on the drivetrain is the best for quick touch ups. Thanks for all the tips and tricks, great information and very helpful.

@richis65 5 месяцев назад

Love seeing how things come apart and come together. Robby should be happy.

@craigclark3279 5 месяцев назад

Many, many thanks for the class and your knowledge on this part. I sent this to my off-road friend. It made his day. He is now looking to gather all the parts he needs. Thank you again.

@coltbuildsit 5 месяцев назад

Glad it helped!

@JasonSmith-xo9qr 5 месяцев назад

Rad explanatory teardown and rebuild. Made it look as easy as a black n white coloring book.

@Ddabig40mac 5 месяцев назад

I know that coloring book, my favorite page is the Killer Whale.

@johnnykirkland611 5 месяцев назад

Good morning Colt keep'em coming 👍👍

@byers704 5 месяцев назад

Nice walkthrough.

@dougalexander7204 5 месяцев назад

Much respect.

@patrickjohnson4975 5 месяцев назад

Great explanation on the gears and installing the doublers. How about some more explanation while in use.

@ShaneEstabrooks 5 месяцев назад

Totally awesome 😎

@richardashley6312 5 месяцев назад

GreT stuff Colt⭐️⭐️⭐️⭐️⭐️

@douglasnsubuga7962 5 месяцев назад

You do an excellent job explaining what you're working on.

@taurota1554 5 месяцев назад

Awesome and outstanding.Thanks for sharing and taking us along

@mikemassey1405 5 месяцев назад

Colt , your doing well . Thank you for the great content .😊

@gregb76 5 месяцев назад

Come on Colt you are a man's man that can't be that heavy.

@danhambrick6331 5 месяцев назад

Nice job Colt.👍👍

@SmokedogsCreativeFlows 5 месяцев назад

as always A-class step by step DIY video for the 205. Great job. Keep it coming!

@waynehutcheson6479 5 месяцев назад

Glad you got your own channel co.Keep it up

@musky629 5 месяцев назад

Great video ! Keep up the content!

@Heeman5 5 месяцев назад

Awesome vid Colt. Keep them coming!👍🏼🤙🏼💪🏼

@jimmyjenkins9240 5 месяцев назад

Robbie is in good hands with you and Rory.

@mrfunnylookinhayes9088 5 месяцев назад

Good Shit. Thank you Colt. You are a true Superstar. I pray your channel continue to grow. Because you know your shit. Thank you for another amazing video. God Bless.

@steveclark4291 5 месяцев назад

Colt , sir , you're suppose to use your legs when lifting not your back ! Otherwise when you get my age your back will remind you what you did when you was young ! Oh I'm 69 and have done all kinds of work since I was about 10 ! From farming , construction , oil field , Aerospace Ground Equipment Specialist in the military , landscaping , railroad and much more !

@skyepilotte11 5 месяцев назад

Nice show and tell Colt...looks real stout Just subbed your channel...wish you well...

@coltbuildsit 5 месяцев назад

Thanks for the sub!

@raystevens687 5 месяцев назад

Hay Colt I'm wondering if you have a air Chisel I'm wondering if you could be really careful you could make fast work of getting all that baked grease really fast.

@danielross3635 5 месяцев назад

I have an F350 that I’ve owned for years with a 205 and I want to do a 203 double or in front of it I think I’m gonna use this as a how to video

@TwistedOff 5 месяцев назад

👍

@mikesmith-bt6um 5 месяцев назад

That looks like the old shop... you still working on you move or did build a replica?

@apexedmedia 5 месяцев назад

Hey colt any tips or tricks on adjusting a trip stick 205 and strong box I struggle to get the doubler to shift and stay in gear

@coltbuildsit 5 месяцев назад

I'd try a stronger detent spring.

@lewisland3695 5 месяцев назад

do you mean roll pin rather than crush sleeve?

@jacobwhittaker2790 5 месяцев назад

Love the content but Barnes 4wd code seems invalid

@andyturner9715 5 месяцев назад

What’s the part you have to remove or install that the little bearings fall out?

@andyturner9715 5 месяцев назад

You answered my question before the video was over 👍

@frankhage1734 5 месяцев назад

Please comment on the 12.5... sized bolt head. WTF?

@martintaylor984 5 месяцев назад

Algorithm comment

@jake1021 5 месяцев назад

Roll Pin Colt, Roll Pin, Not crush sleeve.

@glenludwig5135 5 месяцев назад

You’re a great teacher Colt. Wish I was younger every time I watch you so I could make use of your talents.

@coltbuildsit 5 месяцев назад

You can do it😎👍 thanks

@davedean1571 5 месяцев назад

You got it friend!!! We can do all things in Christ Who strengthens us!! Blessings Ang Shalom Aleichem.

@jessepitt 5 месяцев назад

@@davedean1571. Leave your religious BS out of this.

@timoy4988 5 месяцев назад

@jessepitt thank you 😀👍

@MarkoMygun 5 месяцев назад

Free Country Free Speech First Ammendment I guess you dont belive in this. Don't like it don't read it pal. @jessepitt

@oldschoolmoto 5 месяцев назад

👍

@GP54 5 месяцев назад

Its good to see someone teaching, showing, and explaining again. Even if i think I know how to do something its always good to watch someone else show how they do it. Keep up the great content!

@xxBlazinBobxx 5 месяцев назад

You're a natural at explaining things on camera, Colt! That wrecker Rory is putting together for Robby is one cool project!

@GEORGEFIRE777 5 месяцев назад

crush sleeve ?? In California its known as a roll pin ,i was scratching my brain to figure it out . still good ,keep up the good video;s

@georgenahodil23 5 месяцев назад

It's a roll pin in West Virginia too.

@markstrickland438 5 месяцев назад

Always called them roll pins in NC, too

@01XJBenjamin 5 месяцев назад

Roll pins for sure here in PA. Crush sleeve is used on an axle pinion to adjust pinion preload here in PA.

@melsjunk2645 5 месяцев назад

Even in canada I was told they were a roll pin or split pin sometimes lol

@markstrickland438 5 месяцев назад

I'm certain he knows the difference, he just misspoke. I know that I would screw up like mad if trying to make an educational video of any type.

@brendankelly3596 5 месяцев назад

You had me confused, you kept calling the roll pins, crush sleeves.

@todd7105 5 месяцев назад

i believe the actual term is spring pin.

@ge3186 5 месяцев назад

Nice video..!!! Never heard them called crush sleeves Weve always called them rollpins

@billlove6128 5 месяцев назад

Or spring pins

@tedz74 5 месяцев назад

Yes, roll pins. Crush sleeve is on your pinion.

@MrChrissy1r 5 месяцев назад

Hello from Englandistan, Great that your looking after Robbie, and your hands. I was not so considerate with mine for years gripping hard, hammering chiseling etc. To my cost, I have had in all 13 operations on them now, and they're still not right. Look after your hands and backs guys one spinal op down now, so no more strain for me.

@donovanlcarroll 5 месяцев назад

Here’s a comment for the algorithm, Looking forward to more great content. How cool to do these projects that help other YT fabers. This is going to be a great channel, thanks for sharing Colt!

@Wesley-uo3rn 5 месяцев назад

Some people can't explain it.. you have it figured out. Really like what u do

@terryfoust4802 5 месяцев назад

COLT, VERY informative and step by step instructions. WELL DONE SIR!!!😀

@cjm5229 5 месяцев назад

Good video! For Youse Guys, that don't understand the English language from the Dakotas, and other places north of I80, I recommend watching Derick @ Vice-Grip Garage, so you can learn to understand a Fellers proper use of English. Then you might understand that little crush pinny thing. 😂

@b.d.johnson3466 5 месяцев назад

Just a thought about a shirt logo COLTBUILT. Love your content.

@bripslag 5 месяцев назад

I know I sure couldn't lift a 175 pound t-case onto a workbench. I guess that's one of the reasons I'd rather watch you build stuff instead of building things myself. (Lack of tools, shop space, and tools are some of the other reasons, lol.)

@ramjam720 5 месяцев назад

Colt, in your Samurai buggy, how did you achieve lower transfer case gears? I live in Indonesia and have a '92 Vitara. The low range is not low enough, and I'm looking for a solution.

@HerbertMiller-n9t 5 месяцев назад

Crush sleeve???? Do you mean roll pin? Even my fancy set of punches for those are sold as roll pin punch’s. Bet he intentionally called it by the wrong name just to get comments for the algorithm.

@davidweidner1675 5 месяцев назад

Way to go, Colt. It's great 👍 to see you working with other RU-vidrs!

@DonaldMarsingill 5 месяцев назад

What you are calling a crush sleeve is actually a roll pin...

@DaveRogers583 5 месяцев назад

To complicated for me.

@steven.h0629 5 месяцев назад

Liked and Subbed .. a long time ago! 👍😎✊

@donnieburger3721 5 месяцев назад

crush sleeve is it the same as a roll pin?

@Derf1313 5 месяцев назад

Have to chuckle every time someone talks about the 205. My long time work truck (73 K30) I bought in '81, has a 205, but I've rarely used low range, the darned 4 sp creeper is really low to begin with, lol!! Great build with explanations! Thanx !

@flintlock_glockTJR 5 месяцев назад

"It's also super heavy....Oh yeah, use your back." 😂😂😂 Blow your back out. Be man.

@martintaylor984 5 месяцев назад

Algorithm comment.

@martintaylor984 5 месяцев назад

Algorithm comment

@tommynyhammer1980 5 месяцев назад

Can we still call you Bleepin Colt?

@FORCE_PBC 5 месяцев назад

You should put out a call to anyone looking to finish a project. Some people lack all the knowledge. You can swoop in and get a video and a friend out of it. There are tons of trucks at 97% that could use help but too proud to ask. Or don’t know who to trust. Just an idea.Bearded mechanic does that with motorcycles. You always help people and you are a good dude. That’s why I said it.

@justinwaite2139 5 месяцев назад

That was a great explanation as to how a Tcase actually works, I really enjoyed the commentary as you went along. Great video!

@coltbuildsit 5 месяцев назад

Glad you enjoyed it!

@hazeljustice307 5 месяцев назад

Hey Colt I've watched you for years when you was bleepanjeep I'm so proud of you going out on your own you are growing fast and nobody explains things like you thank you so much you did amazingly good job on your S-10

@daveogarf 5 месяцев назад

(*you WERE "BleepinJeep"). Ever heard of periods (full stops)?

@hazeljustice307 5 месяцев назад

I just said he was growing his own channel fast I truly didn't mean anything by that post I'm sorry

@ej9147 5 месяцев назад

Really liking the content, Colt. Good job!! If I may ask, what video editing software do you use? I am trying to make some videos and Davinici is kicking my butt....TIA for any help you can provide

@mahbriggs 5 месяцев назад

I have used an oxy-acetylene torch to burn off heavy deposits of oil, gease, and tar! Just keep the torch moving! The idea is to burn off the crud without heating up the metal underneath!

@nathannielsen8467 5 месяцев назад

Hey Colt, you misspoke when calling the roll pins "crush sleeves". And the 205 doesn't use planetary gearsets, just helical cut gears. Sorry to be the nomenclature police . Love your videos and enjoy your way of explaining everything.

@brockryan3405 5 месяцев назад

OHHH! Robby's model AA tow truck build by Rory. I thought you were helping Robby's current wrecker King Fred.

@OldManJimmy1 5 месяцев назад

12.5/16th socket? 12/16th is 3/4 I googled this and couldn't find a 12.5/16th socket.

@paulshannon4576 5 месяцев назад

I had a 74 F-100 4x4 and it had a NP-203 transfer case. I always wanted to put a NP-205 in because you could use factory parts for the change but in 30 years I just never got to it.

@joshgreen2164 5 месяцев назад

Was that a "don't tell mom the babysitter is dead" quote? Nice

@1negev1 5 месяцев назад

Colt instead of that gasket sealant your using try this next time i love it for all kinds of things Permatex 80065 High Tack Spray-A-Gasket Sealant

@jeffjones6115 5 месяцев назад

Hey Colt great timing on this, my son and I have just started to rebuild the T-case from my '72 Dodge W100 we want to add the twin stick as well as an overhaul!! Thanks for the info.

@MrBillsfishin 5 месяцев назад

A great video. So much information. Now I just have to find $2500 for that doubler. Lol

@barntech2291 5 месяцев назад

I use Indian Head gasket shellac like you silicone your paper gaskets.

@daveallmon6937 5 месяцев назад

Thank Matt and Robbie for me following you..

@stuartkcalvin 5 месяцев назад

Amazing! Now subscribed. Looking forward to Layton fitting it :) Or Rory

@Golden-69 5 месяцев назад

I would like to put a transfer case like this in my 2000 3.4 Tacoma. Mine sucks! I did destroy one already. I can feel this one ready to break.

@rightwingmanscott 5 месяцев назад

Always enjoy your how to stuff with gears and transfer cases. So foreign for me and I have tons of knowledge mechanically. Just not gears. That looked like your old shop in South Dakota.

@johnme7049 4 месяца назад

Brother, you should get you one of those rolling hydraulic lift carts from Harbor Freight and USE it. Take care of that back, it's the only one you've got. Love what you do, want to see you able to do it for a L O N G time yet.

@dennislavigne1299 5 месяцев назад

Off topic. Love a video explaining your samurai. Inc how you ended up with those brakes and what it required to put them on. Toy axles are they not?

@loydheckenlively9426 5 месяцев назад

Call Ayi wanna know why you didn't wrench your gears off before you stuck him back in that clay case, you cleaned. Can you explain it to me please? And do you have to

@russellraspier4859 4 месяца назад

They are a roll pin not a crush sleeve. NP 205 low range is 1.96:1 not 1.98.

@adamfowles1060 5 месяцев назад

I was hoping the midnight Metalworks case would have worked out... I bought one mostly from the review you did with good explanation of how these work

@madmodifier 5 месяцев назад

Interesting, I have never heard someone call a spring pin/roll pin a crush sleeve before. Its too bad that ORDs customer service is so poor. They make neat stuff for sure.

@Bobbywolf64 5 месяцев назад

Roll pin brother. Roll pin. (or retaining pin if you must). You were confusing the hell out of me until I realized you were mis-naming the part. A crush sleeve is a spacer that is deformed on installation, like on various differential pinions.

@adventuresaimless 5 месяцев назад

Don’t tell mom………..the babysitter is dead! 14:19

@thousandoaksauto1696 5 месяцев назад

Hey Colt, good video! Can that doubler be used on a NP241C, or J, or D models?

@botfoblhrp 5 месяцев назад

if its a japanese bearing , its gotta be good, imagine a piston running that gearbox at 9000 rpm , like japanese motorcycles😊

@normanpatane2417 5 месяцев назад

I love what you do. I'm glad you have your own channel. I hope all is good with you and Matt.

@noneyacabbage 5 месяцев назад

You keep saying "crush sleeve" but never really saw it, looked like a roll pin from what was shown.

@jonmcfarmer6954 5 месяцев назад

Shouldn't you have cleaned the paint off the gasket surfaces? 🤔

@bertwalts3211 5 месяцев назад

I’ve got a problem with my 300 long story short I don’t know anything about it but it seems that It’s stuck the shifter rods won’t move the body is off the frame is there anything that I should look into

@stevenwork95 3 месяца назад

i Don't have a 205 but really good info on the crush sleeve access holes...

@philip4x4guy 5 месяцев назад

I really like this kind of content, man I'd love to have this doubler in my 79!

@davidanderson3999 5 месяцев назад

Awesome video, I have thought about this swap as I have a 205 , I am running 5:13 gear in axels and she has lots of low end grunt, but it would be cool to do from end digs