No video :(

Magura HYMEC Hydraulic Clutch for my 2021 Yamaha YZ250FX

Подписаться 10 тыс.

Просмотров 20 тыс.

50% 1

In this video I shared some tips for installing the Magura HYMEC Hydraulic Clutch kit for my 2021 Yamaha YZ250FX.
#YZ250FX #Magura
Magura HYMEC Clutch Kit installed in this video:
Part Number 2100008
Link to the kit on the Magura website (not an affiliate link):
www.magurausa-...
Link to the kit on RockyMountainATVMC, enter your fitment (not an affiliate link):
www.rockymount...
As an Amazon Associate, I earn from qualifying purchases. It doesn't cost you any extra but it helps support the channel when you use my Amazon links. Thanks!
amzn.to/3spVqMX

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 117

@adzythepwcblokeinaustralia5467 3 года назад

I have a 2021 WR250F here in Australia , I have used a Magura hydraulic clutch on my old WR250F but after installing a Rekluse CX3 Radius auto clutch its not even neccesary to have a lever . I have a hydraulic LH master cylinder and brake lever on the LHS plumbed directly to the rear brake with brake pedal removed . It is amazing how good it is and takes the workload off the rider when racing .

@OldBrokenBastards 2 года назад

I've got one on 2019 YZ 250 and love it. It's the ultimate for the tight single track.

@THMXCO Год назад

Is the clutch pull a lot easier?

@OldBrokenBastards Год назад

@@THMXCO I can one finger it all day.

@earl6969 2 года назад

I run the gen2 hymec magura on my steely wr450f. Added the moose shorty lever and it all actuates a torque drive recluse. This turned a tractor brute into a very manageable honey badger. *Slow is smooth... Smooth is fast. 🤘🤠👍

@earl6969 2 года назад

I use the moto mountain 50% draw lever,but I'm told you can use anything that fits a 2000 and up husky 250.

@rorylah 7 месяцев назад

im thinking of doing the same mate would you be able to help me with your experience. does the gen 2 hymec feel light enough that you can pull clutch in with one finger ? is it as good as other hydraulic clutches such as ktms oem clutches ? and is the “gen 2” newer ? hence the name ? thanks Rory

@terrywilson1362 3 года назад

I have a stock clutch on my 19 YZ250FX and it is just as easy if not easier to pull than any hydraulic clutch I've pulled on I wouldn't change it for anything

@brapbuddy9660 3 года назад

I love my Magura! It makes the bike so much more enjoyable to ride. Make sure to change the fluid every once in awhile or you can blow a seal in the slave cylinder, found that one out the hard way

@DirtBikingwithDonnie 3 года назад

Thanks for the tip!

@KestrelYI 2 года назад

Great walk through and explanation of the process & benefits. Thank you for making this! Considering it for my WR.

@DirtBikingwithDonnie 2 года назад

Thanks for watching!

@Bubbleuprubberdown 3 года назад

I did the Hymec on my ‘17 YZ250FX. It was great, loved it. Just as good if not better than the cable. I put on a few good hours and then sold the bike for a smoker. Loved the FX. I recommend this thing.

@DirtBikingwithDonnie 3 года назад

Awesome, thanks for watching!

@jasonstevens4192 3 года назад

I have a buddy that put one on a 19’fx, wow, crazy how light the pull is, thinking this will be my next upgrade for my WR250F!

@rorylah 7 месяцев назад

did yiu end uo doing it ? if so how easy is the pull ? can you do with one finger ?

@jakenader2265 2 года назад

worked great on my yz450f, thanks for the help. it feels like a new bike.

@DirtBikingwithDonnie 2 года назад

Thanks for watching!

@thumbgas888 Год назад

What did you do to make it work?? Mine will not work on my 450fx😢

@markgunnison 3 года назад

That seems like a great idea. I love hydraulic clutches.

@DirtBikingwithDonnie 3 года назад

I’m enjoying it so far. Thanks for watching.

@vegasromaniac 3 года назад

Since I installed the pull reduction box on my cable clutch it feels a lot better than any ktm , so I'm not going to hidraulic anytime soon ...

@DirtBikingwithDonnie 3 года назад

I remember that video, that’s a cool option too.

@Captain250FX 3 года назад

Great video! Something to think about if I get a new FX next year!

@DirtBikingwithDonnie 3 года назад

Thanks for watching. They make a kit for your bike too.

@mrmotocross6819 3 года назад

Hey bro just found this channel i like it.

@DirtBikingwithDonnie 3 года назад

Awesome, thank you!

@BlueDawnEnduro 3 года назад

SUper cool mod. Congrats.

@DirtBikingwithDonnie 3 года назад

Thanks!

@thepatternforms859 3 года назад

Sweet!

@robertwoods2505 3 года назад

Great job brother. Enjoy!!!

@DirtBikingwithDonnie 3 года назад

Thanks for watching!

@RichardStreeterYZ450FX 3 года назад

Hey there, just purchased one of these for my 2020 450fx will have it in a week or so, I'm wondering if there's any issues with heat from the header pipe as it looks like the slave cylinder is going to be very close. Cheers Richard

@DirtBikingwithDonnie 3 года назад

It is very close, but I haven’t had any problems. I’ve done 3 races with it and no issues. The mineral oil boiling point is about 600 degrees f. The 450 may put out more heat.

@DdDten 2 года назад

If you break the lever do you have to get another magura lever or will a universal one work like asv etc?

@DirtBikingwithDonnie 2 года назад

The aftermarket levers fit. I’m running a Moose lever because it’s shorter than the original. Most husqvarna dirt bikes use the same type lever so they’re pretty easy to find. Thanks for watching!

@roo450 Год назад

nice

@DirtBikingwithDonnie Год назад

Thanks for watching!

@jake981 2 года назад

Hey do you have the link on Amazon for this kit? I'm seeing a kit from Magura with this same PN# but it has older pictures. I want to ensure it's this same kit you have. Haha.

@DirtBikingwithDonnie 2 года назад

I found the same listing as you on Amazon and wasn’t sure about it either. Rocky Mountain ATVMC might be the best bet.

@jake981 2 года назад

@@DirtBikingwithDonnie Thanks for the heads up! I ended up spending a touch more money and just ordered it from RM ATV. My bike comes in April this year so I'm itching to put these parts on her! Being from the West Coast, I'm also jealous of your tight and twisty rutted trails! Haha. Cheers!

@jpp2422 Год назад

Great video. Did you have to make an internal adjustments to make it work with the Rekluse? Thinking about adding one but run a rekluse and don’t want to go crazy adjusting it etc . Ty!

@DirtBikingwithDonnie Год назад

Check this video for info on making it work with the Rekluse. 2023 Yamaha YZ250FX - Custom Build for Harescrambles and Sprint Enduros ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mQkq1y1t1YE.html

@jpp2422 Год назад

@@DirtBikingwithDonnie thank you

@sethbarnes_2236 11 месяцев назад

Will this kit work on my 2019 yz250f. My clutch cable just snapped and my friends rhat ride husqvarnas were giving me shit about having a clutch cable.😂

@WAKO426 2 года назад

What is advantage over cable besides being easier?

@DirtBikingwithDonnie 2 года назад

I prefer the feel of the hydraulic, it's just a personal preference. I've been using this for 110 hours on this bike and I'm still enjoying it.

@intothewhite2 Год назад

Still liking it 18+ months later?

@DirtBikingwithDonnie Год назад

Yes. I put 140 hours on my 2021 bike using it and I recently moved it to my new 2023 yz250fx. I shared more info and thoughts in a recent video linked here. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mQkq1y1t1YE.html

@Dat_Sun 2 года назад

Having issues finding this part. The link doesn't work and the Part number is only partial. 2100008 (-10 or- 50?) Lots of different last digits to choose from.

@DirtBikingwithDonnie 2 года назад

It's available on Rockymountain at www.rockymountainatvmc.com/parts/magura-hydraulic-hymec-clutch-p and on the Magura site at www.magurausa-shop.com/product.htm?pid=117198 Both Rocky Mountain and Magura list the part number as 2100008 with no additional numbers.

@Dat_Sun 2 года назад

@@DirtBikingwithDonnie I wonder what the difference is when 2100008 is followed with a - 10 or - 50 (2100008-10). Thank you for confirming the correct part. I came krom a 22 tpi bike and find the yz clutch to be like a rusty boat anchor chain winch in comparison.

@DirtBikingwithDonnie 2 года назад

@@Dat_Sun Glad to help. Not sure about those other part numbers. The Magura site states the specifications for the kit with the master cylinder size, the line length and the slave cylinder size. You may be able to compare that info on the other listings you're looking at. I got spoiled to the KTM hydraulic setup too. The cable feel is completely different.

@Dat_Sun 2 года назад

@@DirtBikingwithDonnie I looked and compared. The last digits (-10 or -50 for example) includes a switch, or longer blade or different length lines.

@Dat_Sun 2 года назад

@@DirtBikingwithDonnie I installed it today, I have less than 1mm freeplay with no washers. I wonder if the freeplay will increase after I get some time on the clutch? (Brand new bike). The clutch pull is noticeably easier.

@LukasStaton 9 месяцев назад

what clutch levers can i replace onto it? can i put husqvarna levers on it? love the kit butttt the chrome ain’t gonna last for me

@DirtBikingwithDonnie 9 месяцев назад

Yes, any clutch lever that fits husqvanra with Magura will fit this.

@LukasStaton 9 месяцев назад

@@DirtBikingwithDonnie awesome thank you sir!

@eyeam33 Год назад

HI there, I tried to order the clutch from your Link to the rocky mountains site, but it states on the website the it only fits the YZ250F 2022 not the YZ250FX 22 like I have, do you think it will fit/work fine? Just want to make sure before I order. Rocky mountain say they can't confirm

@DirtBikingwithDonnie Год назад

Yes, you have to order it for the YZ250F.

@stinthedude Год назад

My magura clutch doesn't engage til its almost to the bar. I need to get all fingers on it or I'm not able to pull it far enough to use it effectively. Do i just need to bleed it? It came on the bike (and it's my first bike) so I don't know if this is normal

@DirtBikingwithDonnie Год назад

It either has air in the system or you need to shim the slave cylinder. Look at the slave cylinder while you pull the lever. The slave cylinder rod should start moving immediately when you move the lever. If it doesn’t there is air in the system.

@stinthedude Год назад

@DirtBikingwithDonnie it's still on the bike but it does wiggle around right away when I pull the clutch lever

@user-nf7ho5md8w 3 года назад

When you put the car in gear on the repair chair, does the wheel spin too much? Can you stop it with your hands?

@kawi5827 3 года назад

I'm considering buying one of these, do you think it is too late to get a 2021 model? Should I just wait for the 2022's to come out?

@DirtBikingwithDonnie 3 года назад

I’m not sure if they’re changing anything for 2022. The 2021 bikes are kind of hard to find. Maybe wait until the info on the 2022 models is out and decide then.

@rorylah 7 месяцев назад

do you know whether this will fit a 2018 wr450f ? or is there likely to be a problem

@sethwaterfall 3 года назад

Great vid! What riding gloves are you running?

@DirtBikingwithDonnie 3 года назад

O’Neal Element.

@scotttapp561 3 года назад

So, have you ridden the YZ enough to know if you generally prefer a 4 stroke over a 2?

@DirtBikingwithDonnie 3 года назад

I had a 2015 Honda CRF250X and a 2017 Yamaha WR250F before, but I've spent most of my riding hours over the past few years on the KTM 2 stroke. I enjoy riding both but for now I think I'm smoother on the KTM. I need more time on the YZ250FX.

@WAKO426 2 года назад

Wow I have a 2015fx and a new ktm 500excf with hydraulic clutch and my fx is as easy as ktm is new bike stiffer?

@jerrymena3345 3 года назад

Hi! Can you adjust the distance on the lever depending of your hand size? Like the KTM? Thanks!

@DirtBikingwithDonnie 3 года назад

Yes, it's little different than the Brembo setup on KTM but it is adjustable.

@jerrymena3345 3 года назад

Thanks!!

@R4nsack Год назад

does the 21 fx not have the safety switch?

@DirtBikingwithDonnie Год назад

It does not have a neutral safety switch. My 23 doesn’t either.

@Eddie_Barrett 2 года назад

where did you buy it from where did you buy it from i can't find it anywhere in stock

@thumbgas888 Год назад

Did it work rightaway out the box, I have a 450fx and just bought this and it will not work at all

@DirtBikingwithDonnie Год назад

Yes, no problems at all. I believe the 450 is a different kit. I'm assuming you bought the 450 kit and not the kit reference in the video.

@thumbgas888 Год назад

@Dirt Biking with Donnie Rocky Mountain, send me the same part # as the one you have on the video, I think the only one thats different is for the WR250/450f, for the FX and regular F are same part #, ill play with it a little more and see if I can get it to work, but its frustrating for sure, Thx for the reply!

@DirtBikingwithDonnie Год назад

@@thumbgas888 That’s strange because the 450f and 450fx have the same motor and the 450f kit has a 35mm slave cylinder. The 250f/fx uses a 41mm slave cylinder.

@DirtBikingwithDonnie Год назад

@@thumbgas888 RMATVMc doesn’t list this kit for the FX at all. You have to buy the corresponding F kit. You have the same engine as the 450F, you need the 450f kit. The 41mm slave cylinder you have in the 250 kit won’t work.

@thumbgas888 Год назад

Ok problem solved, just talked directly with a Magura Tech, the free play has to be from 4/6mm,due that they dont have a slave for the FX or the F in a kit, I had to add washers to get to that free spacing and now it works good,so far. He also sugested to make a custom kit with a 10.5 bore Master insted of the 9.5 that is on this kit but that would make the pull a little harder as well.

@brentsimons3991 3 года назад

Are you still able to pull the clutch in and still leave fingers on the bars (fingers between the lever and the bars, like smashing them almost)? I use 1 or 2 fingers with my clutch cable setup now. But, at the end of the day my fingers get sore. I see maybe a hydro clutch in my future. I've been on the fence, Lol. Thanks for the video Donnie.

@DirtBikingwithDonnie 3 года назад

Yes, I use my middle finger only for the clutch. You can adjust freeplay with the provided washers (that's why I used all 3) and you can adjust at the lever as well. I can completely disengage the clutch with 3 fingers still on the grip.

@brentsimons3991 3 года назад

@@DirtBikingwithDonnie Thank you Sir!

@BlueDawnEnduro 3 года назад

moving your lever in does wonders and avoids smashing fingers when using proper 1 or 2 finger pull. I also have friends who cut the end of the lever off to to clear your outer fingers.

@KestrelYI 2 года назад

You could combine the just the Magura slave & clutch line with the Clake One Light clutch master cylinder. Added cost but the Clake is very well reviewed and can halve a hydraulic clutch pull.

@joe0813 2 года назад

Whered you get this.... Seems like everywhere I check says it doesn't fit my 2020 250fx

@DirtBikingwithDonnie 2 года назад

I got mine from Rocky Mountain ATVMC. Fitment charts aren’t very good for these kits. I had to contact Magura to get the part number for the right kit, which is 2100008 for the 21 YZ250fx.

@joe0813 2 года назад

@@DirtBikingwithDonnie would that also fit the 20? It should

@DirtBikingwithDonnie 2 года назад

@@joe0813 Should be the same but I don’t know that for certain.

@codename7832 2 года назад

Is there additional numbers after part: 2100008 of this clutch. I am trying to purchase this clutch but it gives me different models: 2100008-10, 2100008-40 etc. Same bike as yours 2021 250FX

@DirtBikingwithDonnie 2 года назад

When I look it up on the Magurausa-shop.com website and on Rockymountainatvmc.com it's just 2100008.

@codename7832 2 года назад

@@DirtBikingwithDonnie thank you

@DirtBikingwithDonnie 2 года назад

@@codename7832 You’re welcome. Also, the box it came in just has 2100008.

@codename7832 2 года назад

@@DirtBikingwithDonnie for some reason when i put this number into Rocky mountain website it doesn't even gives me option to pick 2021 YZ250FX. Closest it goes is 2021 YZ250X😆

@DirtBikingwithDonnie 2 года назад

@@codename7832 Put in 2021 yz250f.

@dalejake5540 3 года назад

I wanna put on my wr450f 2019 will it be worth it

@shannonlooney7082 3 года назад

What bike hauler is that and how do you like it?

@DirtBikingwithDonnie 3 года назад

It’s a Mototote. It’s awesome, I need to make a video about it.

@msparacino4191 2 года назад

Can you keep the clutch switch on this setup?

@kiwi-moto 3 года назад

Nice. what is the model number of the kit you got for the FX?

@DirtBikingwithDonnie 3 года назад

2100008

@randytidwell5836 2 года назад

what type of fluid does the clutch use. Mineral oil, brake fluid

@DirtBikingwithDonnie 2 года назад

Mineral oil

@gabegoodman8219 3 года назад

Does it start in gear as good as before or better

@DirtBikingwithDonnie 3 года назад

No difference there. Starting in gear is still hit or miss.

@jounipohjolainen2687 3 года назад

@@DirtBikingwithDonnie Have you tried increasing the idle rpm a bit? So the battery did not completely cure it?

@DirtBikingwithDonnie 3 года назад

@@jounipohjolainen2687 AG801, idle adjustment and map changes all helped. I wouldn't consider it cured as it's still not a sure thing for race starts in gear. I'll continue starting races in neutral.