No video :(

MAJOR DIY Car Service. Vauxhall / Opel Insignia. How to

Подписаться 1,3 тыс.

Просмотров 10 тыс.

50% 1

*Servicing my 15-Year-Old 2009 Vauxhall Insignia which has 147000 miles on it.
MAJOR DIY Car Service. Vauxhall / Opel Insignia. How to service insignia #MajorCarService #oilchange #filters
I drive around 20,000+ miles a year. Frequent oil changes are essential to keep it going and driving efficiently.
A service center cost around £100-£130 with regular oil. DIY using premium cost around £40!
Other cost are mentioned in the videos.
Jobs done in the video have been change
How to change #OilFilter.
How to change #FuelFilter.
How to #CoolantFlush.
How to do a #Coolantchange.
Cleaning K&N #Airfilterchange
Oil I recommend
#Shell #Helix Ultra Professional AG 5W-30 5 Liters - amzn.to/3tGtpqV
Filters used
Bosch P7095 - Oil Filter Car amzn.to/3voi6El
Bosch N2062 - Diesel Filter Car amzn.to/41O8IWv
Bosch A8512 - Cabin Filter Filter+ amzn.to/3tIFGv0
K&N 33-2962 - Air Filter amzn.to/3H6gsJZ
Coolant - amzn.to/41O8T47
TIME STAMPS
00:00 - Intro
01:00 - How to take off car tyre
01:30 - How to jack up a car
02:35 - Taking tyre off
03:54 - #InsigniaFilterLocations
05:15 - How to change Insignia FUEL FILTER
10:30 - How to drain car coolant
13:57 - How to use Whynn's RADIATOR FLUSH
17:29 - How to drain insignia oil
18:55 - How to drain oil without sump plug
20:28 - How to change Insignia OIL FILTER
27:15 - How to add oil to your car
27:39 - How to RESET Insignia OIL CODE DASH BOARD
28:08 - How to change insignia POLLEN / CABIN FILTER
30:40 - How to change Insignia AIR FILTER
31:40 - How I cleaned my K&N AIR FILTER
32:33 - DIY comparison Vs Professional garage
Jack Stands.
#Vevor car jack stand 3 ton amzn.to/3NQRIt5
#Vevor van jack stand 6 ton amzn.to/47ioaeM
#makita Maintenance Tool Set
amzn.to/3RQ3JjJ
amzn.to/3H8PtxC
Adjustable Oil Filter plier amzn.to/47DVzRv
Best Coolant 10 years or 300,000 mile.
#prestone Ready Mix Antifreeze Coolant amzn.to/41O8T47
#Prestone Coolant/Antifreeze - Concentrate 4lt amzn.to/48iIYnG
Best Car Radiator flush.
#Wynn's Radiator Flush All Car Antifreeze & Coolant Systems amzn.to/3S3YXAr
#Wynn'#s Radiator Flush Cleaner & Radiator Leak Sealant amzn.to/3H6CY5v
Check your car requirements. These are what I used for my #Opel #vauxhall #insignia #Diesel
Fluids
Premium #BestCarOil
#Shell #Helix Ultra Professional AG 5W-30 5 Litres - amzn.to/3tGtpqV
Filters used
#bosch P7095 - Oil Filter Car amzn.to/3voi6El
#bosch N2062 - Diesel Filter Car amzn.to/41O8IWv
#bosch A8512 - Cabin Filter Filter+ amzn.to/3tIFGv0
#K&N 33-2962 - Air Filter amzn.to/3H6gsJZ
+ MAJOR DIY Car Service. Vauxhall / Opel Insignia. How to change filters - • MAJOR DIY Car Service....
+ DIY Insignia: How to Change Car Coolant Tank for your Next Adventure - • DIY Insignia: How to C...
+ How to change car starter motor Opel Vauxhall Insignia - • How to change car star...
+ How to clean EGR valve and throttle body More Power! - • How to clean EGR valve...
+ How to Change Brakes EVERYTHING YOU NEED TO KNOW! - • How to Change Brakes: ...
Thank you so much for your time. Extra Karma points for subscribers.
➤PayPal - Thank You!
paypal.me/sail...
➤Socials
/ serenitycoastuk
/ serenitycoastuk
/ serenitycoastuk
➤Website
www.SerenityCo...
Favorite Thing:
Coffee machine #Sage #BaristaExpress amzn.to/3RYY0JM
How to jack up a car
#CarJackingBasics
#LiftLikeAPro
#VehicleSafetyFirst
#takeoffcartyre
#BestCarOil
#TyreRemovalGuide
#DIYTyreChange
#WheelOffWisdom
How to clean K&N Air filter
#KNFilterCare
#AirFilterMaintenance
#CleanAirPerformance
How to change Insignia Fuel filter
#InsigniaFuelFilterSwap
#FuelFilterDIY
#EngineFuelCare
How to change Insignia Oil Filter
#InsigniaOilFilterSwap
#OilChangeTips
#EngineHealthFirst
How to flush old car radiator
#Homecarservice
#DIYCarService
#RadiatorFlushGuide
#CoolingSystemCare
#FlushAndRefresh
How to change car coolant
#Whynn'sRADIATORFLUSH
#CoolantChange101
#DIYCoolantSwap
#EngineCoolantCare
I recently had my MOT so all the safety checks have been done along with a turbo and new exhaust. I am not a mechanic and this is just how I had done my service post MOT. This is just for entertainment but may help those who have never jacked up a car, know where the filter locations are. It's not that difficult. I did have problems getting the sump plug off but show my work around.
Future video will be changing breaks as I have had a £1000k quote vs £200 DIY!

Опубликовано:

17 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@ewi57ty Месяц назад

Great movie. A lot of people struggle with this oil bolt. Impact gun is good to shake a tread.

@serenitycoastUK Месяц назад

yeah that's a great tip, I do have one but it's on the boat. I was going for the basic tools most people happen to have :-) I have just the oil change lined up in about a months time.

@costcofuel3996 7 месяцев назад

Mate very well detailed video. Love it when people do there own services. A good skill to learn working on your own car.

@serenitycoastUK 7 месяцев назад

Glad to help. That's great, I'm having my laptop fixed if when they get back to me I may do a shorter one. Or refilm it next time. when I change the housing. Hope to gain a few more subscriber.

@Sportage5603 7 месяцев назад

@@serenitycoastUKa little sets of ramps is handy for servicing. Although you do say you have to remove the wheel on yours

@keijak1 2 месяца назад

Thanks for the vid, useful info for my wife's recently aquired Astra J. Been using the suction oil change method for years. My last car an Audi A4 never had the sump plug removed on all the oil changes in the 12 years and 120k miles I owned it for and it's still going.

@serenitycoastUK 2 месяца назад

On my boat, I can't access the sum plug it's far under the engine, so I've been using the vacuum method, and it's worked great. I always film the realistic ways I've done things. I couldn't get the sump plug out and used the pump. I just brought a breaker bar so I'll give it another go when I change my breaks which should be next week and a couple of episodes away. Thanks for taking the time to comment. I always enjoy reading people's comments, answering questions, and improving with feedback. Thank you for liking and subscribing if you did :-) have a great day.

@volt8684 6 месяцев назад

Well done. Serviced my cars, family cars and motorcycles all my life (65 now). Getting trickier with all electronics and codes appearing if you touch anything. With your engine flush need make sure heater is open as lot of sludge in heater radiator and very hard to change. The cardboard tip is very true. Catches everything nasty. Those insignias are very strong cars imo. Good for very high mileages, comfortable and cheap. Also don’t use a ratchet on tight bolts, use a fixed bar

@serenitycoastUK 6 месяцев назад

Good tips, I'm going to replace the header tank probably next month. The float sensor (code 3) goes on and off. I do like the Insignia excellent motorway cruiser. Annoyingly the regressive tax system stings me (clean air zones) Hard to save money while the government shakes you down constantly fir just trying to make an honest living.

@Matt-ft2fc 7 месяцев назад

Love this type of video. Been wanting to work on my own car for a while now to save on costs and learn how to service, change brakes etc but never had confidence or equipment. I know enough I believe from RU-vid videos what to do just need to go for it and this helps a lot. 👍🏼

@serenitycoastUK 7 месяцев назад

You can do it. We're sold the idea that things are overly complicated so that we have to go back to dealerships for services, etc. My car is held together with ducktape and hope. I want to keep it running for as long as possible, but it is at the point that I could do with a new vehicle. So while I save the money, I need to keep it running. I couldn't get the sum plug out, so I did a workaround. Believe in yourself. You only need some basic tools. I do recommend in the description a few. These will last a lifetime and conveniently in a cary case. Sure, you have a few one-off cost, but thev will pay for themselves. If you get really stuck, there are mobile mechanics around. The hardest part is accessing the filters. Ads long as you're looking at them, and you twist to the left your OK. If you have a local mom and pop auto part store considering buying from them. If you don't then as mentioned the amazon links are in there. Thank you if you have subscribed to my channel. I'll be doing the breaks in a few months.

@ManolManolov-uk4ze 3 месяца назад

Thanks for useful information i changed my filters by myself keep going to do useful videos please explain also about tools as well thanks again

@serenitycoastUK 3 месяца назад

I will do, I will be buying a few new tools for my upcoming car and boat maintenance videos. Some of them are a little less common than the socket set so I'll show the set up. If they are any good I'll leave the link in the description. If not then I won't bother. Thank you for taking the time to leave a comment. I always appreciate people's comments, questions and feedback. Thank you if you liked the video and subscribed.

@mr420uk 2 месяца назад

them electric jacks and drill r absolutely amazing I couldn't believe how good they're ma dad got one and thought this thing 😂but really was amazing £80 Amazon takes nuts off in seconds 😮

@serenitycoastUK 2 месяца назад

I'm definitely looking at them as I'm doing my breaks next. All 4 of them. Thank you for watching, liking the video and subscribing if you did. Please let me know if you would like to know / see anything else.

@mr420uk 2 месяца назад

@@serenitycoastUK that be great to watch don't forget your winding tool for calipers mate 😂👍🏼

@mikedean1989 7 месяцев назад

Thanks for the video, I am going to do mine on Sunday, used your links which helped out massively! I did my front brakes a few weeks ago used Eurorepar they are psa aftermarket so approved vauxhall. Need to do the rears soon though so will be watching for more content 👍🏻

@serenitycoastUK 7 месяцев назад

No worries, good luck it's really helped with the motivation when people like and subscribe. I'll be doing the breaks in a few weeks. Apparently they're meant to be done every 50k miles. I've done 60k since having the car over 3 years. Although mot didn't even show advisories

@christopherready8568 5 месяцев назад

Really baffles me why garages charge so much for these jobs. Any mechanic would be able to change the filters in minutes. It's not the mechanic's fault it's the big name garages/websites as independent garages are nowhere near the amount. however, I do my own servicing as well and as you say it is very rewarding and hopefully for future life I can help my kids by changing brakes, oil etc and save them some money and play the proud dad card lol. if you do change the brakes would be good to see a video of that too. I am going to attempt mine later this year as noticing some stuttering while braking.

@serenitycoastUK 5 месяцев назад

Firstly I'd like to say thank you for taking the time to comment and like the video. It's great to see people's feedback so I can continue to try and make better videos. I guess a lot of it comes to cost of premises, rent and business rates and training staff. But it does seem excessive sometimes on. I'll also film the breaks. So be sure to subscribe I plan to do it in a couple of weeks.

@christopherready8568 5 месяцев назад

@@serenitycoastUK absolutely no problem. Look forward to the brake video.

@Sportage5603 7 месяцев назад

Do all my own servicing now. Its the way forward

@serenitycoastUK 7 месяцев назад

Yeah, it's very rewarding, not just financially, You also learn a lot too. Thank you for watching and an extra Thank you if you liked and subscribed. The channel is fairly new so it's nice to have good feed back.

@train4905 7 месяцев назад

Exellent😊

@serenitycoastUK 7 месяцев назад

Thank you for watching and an extra thank you if you liked and subscribed. The channel is fairly new, so it's nice to have good feedback.

@gabrieloltean5765 4 месяца назад

All nice , quite good videos but i hate that type of oil change . It never gets all properly ... each to their own i guess but i prefer the old fasion sump plug and let it drain for a good while .

@serenitycoastUK 4 месяца назад

Yeah, the sump plug had got stuck they can be a ball ache to get off. I tried a breaker bar along with overnight having penetrative oil sprayed on. So it was plan B which I measured that I pretty much got over 95% of it out. You would think they would just put a ball value/ tap on so you can easily get all the fluids out. If I designed a car all the filters would be in the same way access location along with drain valves. Then again they want you to go and spend your money getting these things done. I like the subru outback filters are on the top of the engine and you can touch it with your hand as easy as the oil cap.

@gabrieloltean5765 4 месяца назад

@@serenitycoastUK If you get the sump plug off you can fit your own ball valve and its cheaper than a " pro magnetic " sump plug . I get where you going woth the design. I did an oil change yesterday on a 1.4 tfsi Audi but its VW engine . If you have ever seen that you would think at first glance they where thinking of the mecanic untill you take the oil filter off and realise there is no way to take it off without soaking the alternator in used oil ... the car just burned through the second alternator . Nevertheless in your case i understand the reason and you might be batient enough to wait for the vacum to get most oil out but in a service station they dont wait ... had the fist oil done on my 2014 insignia by the dealer as it was included in price ... wish i never let them ... shit oil like water and it went dark in 30 seconds from the first engine run ... 1 week later did it again with decent oil filter and roughly 2 hours of wait for all the oil to drop down . On a different note from your point of view what is the best oil for the 2.0 cdti ? I am between motul and manol but i see a lot fo people use the shell you had in the video . I do 25 to 30 k a year so do quite a few changes .. and the best option financialy is the 20l jug mannol energy premium dexos 2 but i would rather use something better even if i spend an extra 10 15 quid on a change ( not a pro mecanic )

@DarkReaper-or9el 7 месяцев назад

Next time use a breaker bar for the sump only £10 i really like it.

@serenitycoastUK 7 месяцев назад

I'll try that good tip. I may get some for when I change the breaks.

@DarkReaper-or9el 7 месяцев назад

@serenitycoast trust me that craps on tight! I would suggest next car get japanese as they're reliable. German cars are also great they will last forever only issues I would say is German cars are usually owned by idiots that don't know maintainence so when you buy one could be full of problems. My 1.9TDI 2008 golf is amazing love it wouldn't Change it for anything else atm it's the perfect for me

@volt8684 6 месяцев назад

Hardly a service. More an engine service. The brakes should be done too. Even if only clean and re grease. I usually get 40-50k from discs pads. I take them apart clean and degrease everything once a year. You can feel on the pedal if they are toast. The sump plug should never be hard work, someone’s overtightened it. Always use a new washer. I buy the cheap copper crush ones as I change once a year

@matthewbennett9038 День назад

Which way does that blue seal go round on the fuel filter housing? Some tutorials have the thin side pointing up and others pointing down.

@serenitycoastUK 5 часов назад

For the fuel filter it's the same shape on my one so either way. There was no arrows, if you can reference the time stamp I can take a closer look. It's time to do another service so I'm back on the boat and picking up tools. Ill be doing a filter, oil change probably a shorter video. Thank you if you liked the video and welcome if your a subscriber. As always let me know what you would like to see.

@TheOne18263 Месяц назад

Just wanted to ask in twrns of the coolant, i was convinced that the vauxhall approved for these engines is the RED and only red coolant so is that Prestone one ok?

@serenitycoastUK Месяц назад

I used the Preston one for about 5 months now. The label states "Prestone provides corrosion protection for 300,000 miles. Works in all extremes from -37°C to 129°C and is suitable for all cars and light commercial vehicles. Appropriate for adding to any other coolant/antifreeze." I wanted to use it as it's available all over plus supermarkets. So incase of a leak I can just run into Tesco. If your doing a full flush you may want 2 bottles as it goes via the heater matrix. (put the heater on full) I used one bottle and it's why it's still a bit red. I did a video changing the coolant tank as a couple months later the tank started leaking. The float sensor before the service also sometimes came up with "code 3" which is check coolant level.

@TheOne18263 Месяц назад

@@serenitycoastUK sure thank you ! I've been meaning to do this for ages and I have bought Prestone before to top up but later I discovered there's specific types that area recommended things like GL2 or something like that

@user-ix3zj2vk8h 4 месяца назад

I'll take my hat off to you when you service your own car I do the same thing but too high mate you were tip over the car over

@serenitycoastUK 4 месяца назад

It's been great that's for sure I wish I had started sooner. I've used those stands 4x now. My most recent car vid was changing the starter motor, prior to that was the coolant tank as the sensor wasn't working. I plan to do the breaks next and then who knows. Thank you for liking and subscribing. Let me know what you would like to see.

@seanwallace1972 6 месяцев назад

When filling the empty mile bottle with the old fuel,what’s the long black plastic thing beside where your working,is it the sill trim

@serenitycoastUK 6 месяцев назад

What's the time stamp and I'll have a look.

@seanwallace1972 6 месяцев назад

@@serenitycoastUK 7:04 to 7:58 it looks like it has a sloped too,I’m just curious that’s all

@seanwallace1972 6 месяцев назад

Oh hang on it may just be your tool box?

@serenitycoastUK 6 месяцев назад

Yes sorry for the late reply yes that's the tool box. My main one I left on my boat which is around 100 miles away! I'll be changing the header tank soon as it's got a minor leak and I get "code 3" which is the float sensor. Ill also be changing the breaks too.

@seanwallace1972 6 месяцев назад

@@serenitycoastUK will you be videoing you changing the header tank and brakes and up load here?