Major overlook "Catastrophes" Motor-Bicycle Minarelli of SUCKS!

Подписаться 2,4 тыс.

Просмотров 4,6 тыс.

50% 1

Full 2 Mile Ride! Lets fix what I EFFED UP
2:The correct Installation of the spacer plate for the Minarelli Spacer. This does matter! I found this out the hard way! Adjustments of the Clutch trials and Errors. We are in progress of
making this machine a proper runner. I avoided making this Minarelli A DOOR STOP in the nick of time! Catastrophes avoided... This time
3: Shop Fun!
Wanna skip like a DeGen? I have chapters. I'd prefer you to watch the whole movie but I am here to accommodate.
00:00:00 Intro
00:00:13 Carb Leaks?
00:01:13 Where It leaks From!
00:02:37 Break Down!
00:06:55 Make Minarelli Great Again!
00:12:00 Clutch Adjustment Trial and Errors
00:14:59 ColdStart Secret Sauce
00:15:42 Cylinder Re-Hone
00:16:00 So LOUD!!!
00:16:56 2 Mile Round Trip "FULL"
00:21:37 Returned Driveway Revs
00:21:58 Talkin Bout This
00:23:09 Inside the Clutch Again
00:24:15 Outro and Avenger85 Tease
Any Amazon links I get a kick Back for my Beer Drinking Problem! LOL Thanks For the COLDSNACKS GUYS!
Consumables used for this movie
Carb and choke cleaner
Local hardware auto store, or walmart. used to find my major leak. "DONT USE FOR STARTING A TWO STROKE" No lubrication properties!
dowsil 3145 RTV
cheapest I saw was on Ebay
OR
Permatex Grey gasket maker
amzn.to/47BQvg8
Motion pro Aux Fuel tank
amzn.to/42BK0sN
needles for syringes
amzn.to/3tLfWhI
Syringes 4 pack
amzn.to/48SrBKp
Lamicall Bike phone Holder
amzn.to/48TMpkF
#motorbicycle #motorbike #coldstart #mechanical #2stroke #twostroke #tuning #automotive #workshop #winter
Welcome To ColdStart Garage. We have a great time on this channel!
How to reach me!
coldstart83@gmail.com
Instagram @ coldstart The link is in my about me tab
Thanks for watching ColdStart Garage!

Авто/Мото

Опубликовано:

2 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 101

@DirectCurrent4u 18 дней назад

Thats a really sweet little bike! I can relate to all the finger fkery you have to go through to get these little motors to run mint. They have been playing with me sense I was a little kid and I am 65 now and they still won't go away! I always use a fender but I make mine out of 16 gauge metal and weld them to the frame works Mint! After break in run 100 octane fuel with Blendsall (green label) 2 stroke racing oil. Smells like Heaven! The aroma is amazing! It will make the whole neighborhood smell like a 4 of July barbecue down by the river! The best part about these motors is the Zero Carbon FootPrint! Its keeps a smile on Greta's face! I cant wait to see how this bike runs after You get it jetted in! Keep up the great vidjas and never worry aboot the load Music or Carbon FootPrint!💯👍

@ColdStartGarage 18 дней назад

Hell ya! Thanks for this epic comment.

@CompleteToiletGarage 5 месяцев назад

sounds a HELLUVA lot better when your cylinder is fully sealed hahahaha good vidya guy

@laynesworldchannel2437 3 месяца назад

Love the honesty an transparency about your experience an sharing your build an learning process. All love from texas

@ColdStartGarage 3 месяца назад

That’s why I build videos. To learn. We do have some fun! 🤘🏻🏁🏁🏁

@jmrides777 5 месяцев назад

Great vid bud. Yeah, we all made mistakes putting these things together. When you get her tuned proper your clutch is going to be slippin all over the place. I would recommend DLH SAF-Clutch or you can make a similar budget clutch.

@ColdStartGarage 5 месяцев назад

Thanks for the recommendation. This winter is killing my progress. But it’s not stopping me!

@Littleevil9975 5 месяцев назад

Dam was upside down and backwards lol😂 glad you figured it out bro sounding better towards the end. Thanks for sharing.

@leonardarola 5 месяцев назад

Shiza happens brother, you gotta be ready for it. Thanks for sharing.

@JMB676 5 месяцев назад

I’m close to end of vid, but it’s def sounding better. Definitely needs to be tuned out but it sounds far so worse thing that could happen is marking the plug all carbon up so I say just enjoy it until your ready to tune it in warmer weather. Thanks for posting.

@ColdStartGarage 5 месяцев назад

Agreed. I need to get through Feb

@JMB676 5 месяцев назад

@@ColdStartGarage agreed, I’m postponing a lot of my outside work as well cause it just sucks being out there when it’s this cold even though I enjoy tinkering my older bone and joints just disagree with my mind. lol.

@ColdStartGarage 5 месяцев назад

@JMB676 my dilapidated shed serves well. Heat and some space to work. But it’s hard to find motivation when I’m sun light deficient

@michiganporter 5 месяцев назад

I inherited the giant ashtrays from my ma! Yep i still use em too!

@JGGarage-js7bz Месяц назад

I would recommend the one with the button because it has more movement when it's pushed in so the clutch disengages more! (I would say so)

@Cruise-InTV 5 месяцев назад

Getting close to half a million views biker buddy. Great going! 🎊 🎉😊

@mikemiller3303 5 месяцев назад

Sounds a lot better now that you fixed your mistake I use ultra gray on my lower gasket because I had to take mine apart and on your exhaust gasket I use the red high heat silicone but I seen online they sell metal covered ones on Amazon when mine starts leaking I'll change it on mine as well ride safe brother

@ColdStartGarage 5 месяцев назад

Thanks Mike! I may not build it right the first time.. but I’ll eventually get it right by the 3rd or 4th time 🤘🏻🏁🏁🏁

@mikemiller3303 5 месяцев назад

@@ColdStartGarage brother I'm a licensed electrician by trade you don't think I made some mistakes the thing is you found it and fixed it were learning lol

@Willy7212 5 месяцев назад

Great video.🙂

@ColdStartGarage 5 месяцев назад

Thanks . I’m glad someone likes it!

@theLyzhendricks 5 месяцев назад

4:04 any more then 3 is playin with it 😂😂

@ColdStartGarage 5 месяцев назад

🤣

@raymondjohns7617 5 месяцев назад

Probably could put a spacer between the wheel and frame! Couple of little things you learn on the journey. Have fun and just keep playing on. Thanks Ray

@ColdStartGarage 5 месяцев назад

Such a simple idea. And yet I never reasoned it. It’s deff worth a try. Thanks ray

@georgebell8826 5 месяцев назад

I seen that Avenger 85... Nice

@user-wn2dn4us4b 5 месяцев назад

keep doing what u do learning is moving forward plus u have away with doing videos, funny as hell

@ColdStartGarage 5 месяцев назад

Just trying to have fun in my shed. 🤣 like bubbles from trailer park boys 🏁🏁🏁

@rcadventures4342 4 месяца назад

Cheers from warm Miami…😊

@ColdStartGarage 4 месяца назад

🤣 my poor feeling. Once my frost bite body thaws I’ll be able to feel again.

@djodjodubois9458 23 дня назад

With the silencer it will give back a little more power Rpm.. example a pick up when there is no longer enough restriction (muffler too short or too big for nothing) the pick up will make noise rpm goes up Faster BUT when you go up a hill you'll have a hard time making it go up in speed but the rpm will be high BUT won't be any worse either

@ColdStartGarage 23 дня назад

Thanks for your insight

@gnorman-ct2lt 4 месяца назад

The kind of clutch pads your using are the best and a saf budget clutch is the best and cheapest

@RA31A 5 месяцев назад

I'm surprised at how rich it's running during 1/8-1/4 throttle cruise with that microscopic stock .010" pilot jet in such cold temps. Going to a smaller pilot jet is not really an option so dropping the needle one clip position to #2 will have to suffice. That with a 120-150 range main jet should be the Golds🥇.

@ColdStartGarage 5 месяцев назад

I was almost thinking similar issues. With less knowledge. I knew it was fat at the bottom end and she bogged down at full rpm. I was gonna adjust the clip and throw some fat main jet at it. But the china makuni is infamous due to their poor tune-ability

@RA31A 5 месяцев назад

@@ColdStartGarage Won't it be great to show the world that the China Mikuni will run like EFI when you're done with it?

@ColdStartGarage 5 месяцев назад

That’s the plan… on paper anyways! 🏁🏁🏁

@loud.p500 5 месяцев назад

i see the avenger 85 on that table there 👀 are you planning on making a video about it?

@ColdStartGarage 5 месяцев назад

Hell ya I am! Every motor bicycle part is for a video.. just started filming one today. I’m pissed at California Motorbikes right now! Little spoiler

@loud.p500 5 месяцев назад

@@ColdStartGarage uh oh lol. Cant wait for the video

@ColdStartGarage 5 месяцев назад

Me either. I have no idea how that will turn out yet 🤣

@andymanisski7618 5 месяцев назад

shake it 3 times, after that you're playing!

@ColdStartGarage 5 месяцев назад

This is the old magic. Written 3000 years ago. It prolly in the Bible 🤣🤣🤣

@sleepered7692 5 месяцев назад

Do you find a good jetting for your vm20 carb I know you run whit 44 gear the top end coming soon do you try 28 !!!

@ColdStartGarage 5 месяцев назад

I did not jet it yet. Fixed my current mistakes and we caught a nasty cold spell then decided to rain for a week straight. I can’t catch a break with the weather. But I have some shed videos I can do

@ColdStartGarage 5 месяцев назад

I did buy jets. It’s just too much to mess around in this bad weather. I did not do anything with any gears

@sleepered7692 5 месяцев назад

Thank you man I watch you video good job 👍

@sleepered7692 5 месяцев назад

I have a same engine porting and my shim gasket fit deferent of yours it’s possible put gaskets whit ultra grey for absolutely seal what you think 🤔

@ColdStartGarage 5 месяцев назад

Kinda what I did isn’t it? Or I’m not understanding the full intent of your question. 🥲🏁🏁🏁

@houseoffire72 3 месяца назад

Air gets denser when its cold out. Meaning your jetting needs to be changed.

@justanothermotorizedbikech5138 5 месяцев назад

It could be a combination of not enough load from the 44sprocket and too rich try going to the top of the needle clip

@ColdStartGarage 5 месяцев назад

Something else to think about now. Dang it

@justanothermotorizedbikech5138 5 месяцев назад

@@ColdStartGarage all good brotha. There no rules to these bikes aside from engine specs

@ColdStartGarage 5 месяцев назад

@@justanothermotorizedbikech5138 The engines limitations is what we adjust to.

@justanothermotorizedbikech5138 5 месяцев назад

@@ColdStartGarage it’s possible to make chicken soup from chicken salad😜

@TA-xj5we 5 месяцев назад

🚲👍🐿😎 Lol there yah go!

@B0r3dsBikes 5 месяцев назад

Also i have cnc plates and 8mm thick pads on my website soon if you want to buy those the website should be up today actually

@ColdStartGarage 5 месяцев назад

What price we looking at there? And what’s the website

@B0r3dsBikes 5 месяцев назад

@@ColdStartGarage i should have the website up by the end of the day i don’t remember what i charged for the pads and plate bundle but i think it was $45 shipped

@joerealbeats 5 месяцев назад

That's a different type of cylinder! where can I find that

@ColdStartGarage 5 месяцев назад

It’s a minarelli you will need a spacer a rod and a piston I believe. The pipe and carb is specific as well. I have a complete build video in minarelli sagas California motorbikes sell just the minarelli motor, not a kit

@michiganporter 5 месяцев назад

Does it say gayside on the tube sticker?

@ColdStartGarage 5 месяцев назад

Pretty sure it said bayside🤣

@2strokecarbtuningportingin187 4 месяца назад

Piston looked super rich.

@ColdStartGarage 4 месяца назад

Lot of variables. It very well could be. The nasty air leaks prevented me from tuning. Then winter stopped me in my tracks. I’ll get back around to it as soon as the birds are flying again

@2strokecarbtuningportingin187 4 месяца назад

@@ColdStartGarage blessing is colder it is the leaner it is. Don't worry want be trying to give any tips

@ColdStartGarage 4 месяца назад

I’m not one to shut down anyone from leaving comments. Most of the time you the people are very helpful.

@2strokecarbtuningportingin187 4 месяца назад

@@ColdStartGarage I left you a link to tunning carbs I only have ehh 44 yrs of experience.

@2strokecarbtuningportingin187 4 месяца назад

Ok just watch the end of video definitely rich

@ColdStartGarage 4 месяца назад

Mid throttle rich and wide open it falls flat on its face. The China clone makuni is notorious for tune issues

@nonenone3433 2 месяца назад

Get a better Clutch plate, i bought two from bikeberry its not a super clutch without the extra springs i love it

@ColdStartGarage 2 месяца назад

Thanks for your insight!

@nonenone3433 2 месяца назад

Just re confirming it's a plate with no springs it bolts on same as stock they are meater and will have no issue putting on your clutch cover

@luhrose971 5 месяцев назад

3 times or your playing with yourself😂

@2strokecarbtuningportingin187 4 месяца назад

ru-vid.com/group/PLyTjGWYBzynCsVTGTCDpJIzsz3seMRYRZ&si=pM6uQGBYyZrY8k4w how carb functions and how to properly tune each circuit. 👍

@JMB676 5 месяцев назад

It was upside down n backwards, lol bro that’s to funny

@ColdStartGarage 5 месяцев назад

I’m lucky I did not make a 200 dollar door stop with that motor. It was close

@gnorman-ct2lt 4 месяца назад

Once it starts to run lean It'll run faster but it'll trash your motor in a hurry.Its better to run a little rich

@chrismayberry4315 5 месяцев назад

Jump the cheese burger randy !!

@ColdStartGarage 5 месяцев назад

Last time I hit a jump I could not walk without a limp for a week

@chrismayberry4315 5 месяцев назад

@@ColdStartGarage feed a naigbour some wobble pops and send him out in hockey gear lol

@keeganhache6667 5 месяцев назад

Get a pz20 also get a ngk plug

@ColdStartGarage 5 месяцев назад

It has a NGK. It has an 8. Gonna have to look up what a pz20 is 🤣🏁🏁🏁

@ColdStartGarage 5 месяцев назад

Ha it’s a carb 🥹

@keeganhache6667 5 месяцев назад

@@ColdStartGarage it’s a carb lol oh Ngk 8 isn’t that bad

@ColdStartGarage 5 месяцев назад

I have a couple flavors. I throw the China plugs in the trash

@gnorman-ct2lt 4 месяца назад

Sounded rich to me you could hear it 4 stroking

@gnorman-ct2lt 4 месяца назад

My motor made the same sound you just gotta find that sweet spot on the needle jet

@ColdStartGarage 4 месяца назад

Yup. The lower rpm it would 4 stroke and full throttle it would cut right out on me

@ColdStartGarage 4 месяца назад

I still need to chase the tune on this. Winter is killing progress due to not being able to ride.

@frankharris8516 15 дней назад

hello all anymore know who go Max is

@ColdStartGarage 15 дней назад

Who’s that

@darkstar92772 Месяц назад

Thanks for making mistakes so I don’t have to. Seriously, I’m taking away a lot from your videos.

@ColdStartGarage Месяц назад

Let me show you what not to do. Thats a great lesson if you are willing to watch. Thanks for your kind words 🤘🏻🏁🏁🏁

@breezetixmoto Месяц назад

Too rich. It's sputtering/4 stroking, too rich. need to jet down.

@ColdStartGarage Месяц назад

Cuts out at 3/4 to full throttle. It’s a China clone makuni. I guess they are hard to tune in.. I haven’t had time to fiddle with it this year yet. My motorcycle project has been robbing time from me 🤘🏻🏁🏁🏁