Make a Jeep transmission cooler line tool from a Sharpie cap 

This worked for me... keep in mind I had everything out. A big part of the technique was to push the connector onto the lid more so than pushing the lid into the connector if that makes sense.... Thanks for posting dude!!

Worked great. Thanks for sharing this brilliantly novel and pragmatic solution.

I literally thought. “I wonder if a sharpie cap would fit?” Low and behold first video on here was this. Great minds think alike. Awesome tip

Great frkn idea. Everything is a tool. I am going to chg radiator in our grand cherokee today, and I am going to have a sharpie cap ready. Thank you for sharing

My kinda guy! I just watched the burn-or-turn guy..then Ed Snowden, now yours. Thanks. I have a sharpie-cap.

Love it.... thank you my friend 👊

You sir saved my ass today! I had to use two caps but it worked great since I didn’t have a tool. Thank you for your ingenuity

Genius. A lot of people struggle with that connection but this worked perfectly

You just push the line in squeeze the tabs and pull comes right out every time

This actually saved my life though 🤘🏻

Thanks for the tip brother.

Thank you. So simple, yet, such a progressive idea. You're way ahead of your time... To the burners: common knowledge ain't so common.

Very helpful thank you so much

You are the man! Thank you for this tip!

This worked perfectly for me. Great suggestion!

Brilliant. Just saved me $20 on a specialist tool and a trip to the store. Thank you!

i used a .410 hull. works pretty good

You are a God send

Heres a different way easier first. Just squeeze the two plastic tabs the hose will pull right off. Especiallially easy when in the car. Then you can remove the tab that stayed on with sharpie,

Nice! Great tip.

Thanks! Worked a treat

Any one know where to find/purchase the yellow retainer clip/connector?

Finally a good video.. geez

You are a fucking hero

You done even realize how great full I am

I'm having a hard time finding that clip can someone send me a link or exact name of that part

It didn’t work for me that easily and that was probably because I slit the cap with a hacksaw not a knife, thus reducing the diameter of the sleeve the cap made. Its useful to understand the inside of this connector to better understand how it should work and why it fails. The two ears appear to extend into the joint to create two corresponding lips. These lips are not as wide as the protruding ears, but have to be pushed away from the pipes ridge. That is what the sharpe cap is doing. I suppose the idea was the ears being pressed in should make the lips push out, sort of seesaw effect, but it’s a one-piece moulding!

It worked!

Appreciate it

Can the seal inside the connector be changed ? Mine leaks at the connector. What's in there...an o-ring?

Thanks 👍🏼

Thumbs up!

If I'm replacing these lines on the vehicle, do I need to drain the radiator?

Good to know thanks

What is the name of that hose that you are disconnecting I actually need that hose for my jeep