make cabinet box (basic)_VTP001 

Finally! He teaches us something! Please do a video on installation...shimming, scribing, accounting for curves in the floor or walls. Thank you!

Just can't have enough of these genius videos Thanks for Sharing.

this is advice because you can see that the MDF is cracking - it is split by the screw. After using a drill with a chamfer, you should also use a regular drill and deepen the hole to the full length of the screw. And there are special screws for MDF ;) other than that, it's good work! :)

I think this is a very important piece. It can be used a million different ways. Such a simple design that ranks high in versatility.....thanks.

what's that marking tool called? would like to get my hands on one of these. great video!

Cool video. I prefer it with the back hiding the back cabinet support. Looks cleaner.

Gracias Mr ViTTEN!

Simple et efficace,bravo,à bientôt salut Jeannot 🛠😉

What drill bit size and screw size are using. Thanks

Bastante bonito y me gustó el resultado 😊

Thanks to you, I'm learning a lot always

Hi, how many millimeters of screw do you use?

Just some friendly remarks from guy with 12 years experience in furniture making. Like your making and installing videos, but here this is how not to make cabinet in terms of material choice and joint technique. MDF is pretty bad material for joining into sidewall by screws since it's basically multiple layers of paper pressed and glued together. By screwing into sidewall you split layers and it wont hold for long. At 6:11 mark you can see splitted stretcher, same happend at all other joints. If you use MDF as your material of choice your best joint is eccentric coupler (rastex 15 or similar) paired with 8 mm wooden dowel. Yes, its more work to make properly all necessary holes, but it will last for life, especially if you glue dowel. Slotted backwall is nice, but seems like slot is too close to end of sidewall, plus stretcher is inside, so it doesnt help to support backwall from pushing it outside by accident. Should be at least 12 mm from end, plus you can hide stretcher behind backwall adding support for it in the middle. 12 mm thick stretcher can be mounted on 5 mm dowels. If you use same thickness board for stretcher, you will have 18 mm of space behind cabinet for usage, f.e. for wiring backlights or similar. Cheers and keep up good work.

If not use middle stretcher, whats your another option for drawer?

Great video

is this MDF or HDF board?

why do you always put the nailer strip on in the inside of the cabinet?

since I am able to watch this video, does that mean i am an employee at Vitten now? 😂

hi! what's the tool in 5:25 ?

Круто ))

Nice video. Why you put midle part?

I’m genuinely curious about the center or middle stretcher. 5:48

Молодец, ещё бы без косяков и вовсе было бы полезно.

?????????

hola

🤣💥