Тёмный

Make Noise QPAS vs Steady State Fate Stereo DiPole - Part 2 - Resonance 

Basari Studios
Подписаться 1,2 тыс.
Просмотров 5 тыс.
50% 1

Resonance vs Resonance, SSF Stereo DiPole vs Make Noise QPas with Sound Examples.
For more Info on Stereo DiPole visit SSF:
www.steadystate...
For more Info on QPas visit MakeNoise:
makenoisemusic....
Also visit us and like us at :
/ basaristudios

Опубликовано:

 

2 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 10   
@charliehoyt9377
@charliehoyt9377 4 года назад
I think your problem with distortion on the resonance of the QPAS is because you have the radiate controls turned full left. I could be wrong but I believe that this is causing all four resonant peaks to stack. I wonder if you patch a dummy cable into the right output if the behavior will be more in line with the Dipole. That said I believe you might also have some gain staging issues leading into your monitoring and recording setup since I can also hear some distortion in the low-end resonance of the Dipole. In any case thanks for the comparison videos!
@ZElTGElST
@ZElTGElST 5 лет назад
Dipole sounds way better
@electricalglitch6030
@electricalglitch6030 Год назад
radiate controls means control the distance of Freq between 2 pole , so 2 radiate controls means 4 pole ,it make 4 pole moving inside the sound , thats the whole point of QPAS I think, to make a creative sound we never have before. and you keep radiate controls in a weird value ,comparing the filter only!? you seems make a mistake that treat "radiate controls" like a stereo spread,and pan it to left and right, this is so wrong SSF Stereo DiPole sounds very bored to me , you can achieve that sound with any 2 filter QPAS is another story , remeber the key is radiate controls
@mimcri
@mimcri 5 лет назад
strange krackling on the qpas in mono ... but in stereo i couldn't hear this. Seems to be something with the fully open vca (on qpas) and your end vca. I tested my qpas with the same presets of your video and I hadn't any issues with crackling. There is a very deep button around 11 - 01 but no crackling. It crackles only if my end vca is to high pitched so the signal drives. But anyway ... thank you for this video. Both filters are ver nice.
@BasariStudios
@BasariStudios 5 лет назад
Thanks Christof, if that is the case then something might be wrong with my unit. Will make more videos soon with Sequences, Subscribe if you like, thanks.
@mimcri
@mimcri 5 лет назад
​@@BasariStudios- Yes this could be ... maybe the vca of your qpas isn't any good as it should be. I would write to makenoise and ask about this problem.
@Fluidstructure
@Fluidstructure 5 лет назад
the QPAS is definitely more aggressive & bold sounding, while the Dipole is more precise & clean. I see why one would want both, different character & patching scenarios to explore.. thanks for the demos, Im enjoying them
@housemachine509
@housemachine509 5 лет назад
Dipole 👌
@rainerd9890
@rainerd9890 2 года назад
Thanks, clearest review of the stereo dipole especially starting with using just one side/filter in mono to actually hear the filter.
@Larry30102
@Larry30102 3 года назад
I'm going through the process of buying a nice filter. This was most helpful. Thank you!
Далее
I Took An iPhone 16 From A POSTER! 😱📱 #shorts
00:18
Дикий Бармалей разозлил всех!
01:00
THE SSF DIPOLE GOES DEEP
25:24
Просмотров 6 тыс.
STEREO WORKING  with Make Noise X-PAN
8:35
Просмотров 107
Make Noise QPAS Stereo Modular Synth Wonderpanel Demo
31:05
This French Analog Synth Was Lightyears Ahead
11:31
Просмотров 86 тыс.
Make Noise QPAS Module Demo And Q&A
1:06:41
Просмотров 20 тыс.