Make projects via Micropython using just A9G board | GSM, GPRS, GPS, MQTT and lot more....

Подписаться 133 тыс.

Просмотров 35 тыс.

50% 1

This video will guide you about how to get started with A9G board via MicroPython. I have show the process by doing couple of tasks like,
- Controlling On board LED on A9G
- Reading Button Status from A9G
- Sending SMS from A9G board to any Number
- Sending/Receiving data over GPRS via MQTT protocol using Adafruit MQTT
- Getting current GPS coordinates
and we did all these tasks buy just using A9G board alone via Micropython
Get a free trial of the world's most trusted PCB design software, Altium Designer with 365 and 25% off your purchase: www.altium.com/yt/techiesms
Free search engine for the best quality components from Octopart: www.octopart.com
__________________________________________________________
👨🏻‍💻 Important Links 👨🏻‍💻
Flashing Micropython Firmware on A9G board - • Step by Step Guide to ...
Scripts used in this video - github.com/techiesms/A9G-Boar...
Scripts I took reference from - github.com/pulkin/micropython...
__________________________________________________________
Buy the components for your projects and support techiesms💡🔌
A9G Board - www.techiesms.com/product/ai-...
Smallest TTL Programmer - www.techiesms.com/product/sma...
__________________________________________________________
⏱ Time Stamps ⏱
00:00 Introduction
01:59 About A9G Board
02:10 First change it's firmware to Micropython
02:53 Setting up A9G board for Thonny IDE
03:58 Blinking on board LED
06:26 Controlling LED using Pushbutton
07:50 Sending SMS from A9G board
11:05 Sending & Receiving data over GPRS via MQTT protocol (Adafruit IO)
16:28 Getting realtime GPS coordinates on A9G
19:37 Suggestions
__________________________________________________________
🎥 🎙 My Video Gear 🎙🎥
Camera - Canon 750d
Lens - 50mm f/1.8 STM Lens (amzn.to/32gqnsi), 24mm f/2.6
Key Light - Godox SL60W (amzn.to/3522mHe)
Fill Light/Back Light - Osaka Lightning Setup (amzn.to/2I5cdDi)
Tripod - amzn.to/3uNhC4H
Microphone - Zoom H1N(amzn.to/3Osh12A)
Editing - Final Cut Pro X on MacBook Pro ( amzn.to/3vHcSyJ )
__________________________________________________________
Get connected with techiesms everywhere..
Subscribe Main Channel :- bit.ly/techiesms_youtube
Subscribe Shorts Channel :- bit.ly/techiesms_shorts
Facebook :- / techiesms
Twitter :- / imtechiesms
Instagram :- / techiesms
Website :- www.techiesms.com
Telegram - @techiesms
__________________________________________________________
techiesms
explore | learn | share

Наука

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@deadeye1982a 6 месяцев назад

It's a pity, that it's not in the original project. So you get an old Micropython-Version. Since the last 2 years, Micropython got many improvements and additional functionality.

@ElconicsIndia Год назад

Fantastic board as well as the speaker ! Thanks for this video

@techiesms Год назад

Glad to hear that you liked it. I would just request to keep supporting by keep sharing our videos ✌️

@wjn777 Год назад

Interesting video, thanks for sharing. Looking forward to your next video, hopefully also using the built in SD card slot

@mbuguanjane5612 Год назад

For sure kindly our professor need to check out on sd card....... so far he is doing good job

@viswanathav9620 Год назад

Great video. Making everything simple.

@techiesms Год назад

Thank you 😊 It really take a lot of efforts for us to make everything simple for you 😇 Just keep supporting, keep sharing ✌️

@mbuguanjane5612 Год назад

we are moving very fast , you are now a professor you like doing research here and there and updating us

@ayesha3179 Год назад

Gr8 work done sir ❤🙏keep it up and plz bring with 🆘 button, spy and multi purpose with just this A9G board using Micropython

@tbaztw 4 месяца назад

You are awesome.

@sergiobogarin Год назад

excelente video

@blessingaghoghovwia4903 Год назад

Nice one

@prarthanabhat5855 Год назад

Great video! Adding micropython firmware really simplifies the process!

@buddybusiness01 Год назад

Thanks for so crucial info. Can you pls GPS tracker that provides a live location of the device so we can track it from our website or app so can we connect the above one with our app to track our device specifically if we connect it to our cars

@felipealvarenga6043 Год назад

Very well made video!

@emmanueldurotoye6940 Год назад

Nice Work here. Please can you make a video where GPS data is posted to an API

@nakadany 5 месяцев назад

Hello @techiesms, I disconnect the a9g from the serial usb I feed it with a 5V to 5V source of the A9G and the gnd - and it does not start with micropython or pressing the power button, do you have to do something to start it with external power without serial-usb? Can you make a video? Greetings

@yogpanjarale Год назад

Hey can you also make video about a7670c 4g module as it is cheapest 4g modem and also available right now

@Sekhar_Home Год назад

Is this microcontroller can works on 2g sim? Actually my sim800L rarely read the network.

@tschauleude3426 11 месяцев назад

Hey do you know how I can combine the GPS tracker and SMS sending? Like reading GPS signal and sending data via SMS. I can not find anything ;(

@pondineshs2513 Год назад

Hii, I am working on this module for gps tracking. I had one issue when A9G module was connected to the TTL connector It worked fine but, when connected to the USB cable alone it was not working. How to resolve it.

@lokeshachanta1096 Год назад

can you make a video on a9g module using micro python and send coordinates to Adafruit MQTT

@Rajeshsingh-ws5th Год назад

Is there any 4G support module available (Jio sim). all are 2g support sim videos I've seen so far. Whether its sim800/900 or A9G all only supports 2g.

@sergioestevansuarezdiaz8816 Год назад

con que placa de desarrollo se puede desarrollar con un esp 32

@andersonospina-ld7pe 23 дня назад

Greetings, it is possible to read I2C sensors in this module using micropython

@mbuguanjane5612 Год назад

waiting to see the calling feature in the module and sd card

@thatonesnowboarde Год назад

Hi can you do the same examples in C?

@infoyt73tech Год назад

Great video thank for sharing information this board has on board camera?

@techiesms Год назад

@antoniocampisi5385 9 месяцев назад

great video man... im trying to replicate it to myself but i cant now, should i connect the device in adafruit io page where it says: connected device? or is it non the problem? have i to impost the dashboards in a particular way/name?

@Anh_AI 9 месяцев назад

Which module using 3G or 4G network that as cheep as this module plz?

@dorjidhendup746 2 месяца назад

Sir, I wanted to ask, why sir didn't try sending the GPS location via mqtt, that would be awesome as it can act as a remote tracker. Love from Bhutan.

@ayesha3179 Год назад

Sir when you will upload video on using only A9G board GPS TRACKER❤❤

@Gerald-iz7mv Год назад

Hi is that the best LTE board for a raspberry pi?

@AmirFatahi-v1v 2 дня назад

hi. i have tried to delete sms from sim storage but it didn't work, could you please help me for withdraw all sms from sim storage with micropython. thank you

@emmanueldurotoye6940 Год назад

Sir, how can I program just the A9G chip without the entire development board

@ShivamKumar-yf9ew Год назад

Sir may you create a project using NodeMCU that can control home appliances with the help of ALEXA, BLYNK, IR and MANUAL SWITCH

@briliant.nugraha1645 2 месяца назад

hi, great video as usual, could I know, could we deploy this code, and run this a9g board individually without arduino? I am quite interested with the board, thanks in advance!

@LinkinEffect Месяц назад

An Arduino is not required, even in this video one is not used.

@ahmed100ification Год назад

Which board can accept a 4G network?

@JAM-of6px Год назад

Hello sir can you make a gps tracking project which will display the location in a website(the website also made by yourself). Amazing video btw🫡🫡

@buddybusiness01 Год назад

Ya I also want the same like a gps tracker that provides a live location of the device so we can track it from our website or app

@denicsdevices Год назад

get in touch

@thinkerrobotics Год назад

button, spy and multi purpose with just this A9G board using Micropython

@mdnnjony4000 Год назад

please let me know, gpio pin short to call and sms send.

@axramar7743 Год назад

💫✅️

@TheCruzado69 Год назад

hello . very good video. I have followed the instructions and I have managed to get the gps working. But with gprs I can't connect, using a euskaltel (spain) sim. I have tried several apns. any suggestions? thank you

@techiesms Год назад

It only supports the 2G connectivity

@TheCruzado69 Год назад

@@techiesms thanks for answering. I have tested the sim in my mobile phone in 2g mode and it has an internet connection. in the a9g it does not connect with this same sim using the same apn data. I don't understand. thanks a lot

@mohitrocky3543 Год назад

Great Work Bro.. can You make a video of using both GPS & GPRS in A9G module.Which can send the Gps locations to the google firebase through GPRS in A9G board ..This will be a somewhat challenging for you bro..please make it

@abibor Год назад

Hello, do you know how to send post request to firebase use gprs_c_sdk?

@MArhamShabbir-bg2qn Год назад

Thank you sir but this is my college project so can you make a video using Arduino UNO With A9G Module 🥺🙏🙏🙏

@user-vb9tp4km9c Год назад

i have only 10 pins how i can use it

@AmirFatahi-v1v 20 дней назад

please add ssd1306 oled display to the a9g using micropython

@sundaresann4749 Год назад

Why do we have to press the button to power up the board? It's done automatically right?

@RodrigoAbreuo_o 10 месяцев назад

I have the same question. I tried reading the manual which is in Chinese and in the pin definitions it says that the PWRKEY pin must be low level to turn on. But in the devboard schematics it is at a high level. That's propably why he has to hold the button to turn on.

@subaselvia1250 5 месяцев назад

It's possible to implement this board in women safety projects? Please Guide me sir...

@Embeded_Geek 10 месяцев назад

hey can you make a video on C SDK for A9G, there is not a lot of video material. It uses RTOS like code pattern but it is much more faster than micropython

@axramar7743 3 месяца назад

Need to explore this

@prarthanabhat5855 Год назад

How long does it take to get a fix on the gps, and update the coordinates?

@tanimashraf 2 месяца назад

About 12 seconds from the window.

@padigerimahendra4960 9 месяцев назад

hello sir i have ordered a9G module in your website but it is not working what should i do sir?? is there any replacement or return

@techiesms 9 месяцев назад

Yes we do have return policy. But before that let our team observe the error and try to rectify it Kindly contact on our WhatsApp - +91 82000 79034

@virendraparihar6982 Год назад

Does this work live moving GPS ? Whenever this module moves

@techiesms Год назад

Yes

@denicsdevices Год назад

Hey to receive the SMS, you need to check the event type, it is not int, then the evt object itself contains the information SMS("PHONE NUMBER", "SMS TEXT", pn_type, index,purpose)

@wojtekkusiak Год назад

i have exactly the same problem. sorry for my english, i'm from poland and i can't speak well. you may have the correct code?? I would be grateful

@denicsdevices Год назад

@@wojtekkusiak I have already gave it in my above comment. Please go ahead and try. Let me know the results.

@wojtekkusiak Год назад

@@denicsdevices Okay I see thanks (^^)

@wojtekkusiak Год назад

Problemem jest brak metody SMS_Recive w bibliotece Cellular. Wystarczy wspinać >> help (Cellular) i tam wyświetla się wszystkie funkcje itp „recive” brak stąd nie ma możliwości żeby to działało

@habibhabibov4610 Год назад

hhhhhh you are Crazy hhhh god bless you. wow

@aadarshrajput4372 10 месяцев назад

what will be total cost if i want to make it as my clg project

@techiesms 10 месяцев назад

you can get the A9G Board at the cheapest price on Internet through our website www.techiesms.com/product/ai-thinker-a9g-development-board/

@ismartalluarjun Год назад

Please make mobile phone keypad mobile phone add Nokia display and OLED display full video make

@shahriersiddique2609 6 месяцев назад

How to include microphone @a9g?

@techiesms 6 месяцев назад

It's already in built in the A9G dev board

@shahriersiddique2609 6 месяцев назад

@@techiesms i meant coding wise, like storing audio to sd card then sending audio to webserver etc.

@lewebusl Год назад

@nakadany 5 месяцев назад

when start stop show this message: Device is busy or does not respond. Your options: - wait until it completes current work; - use Ctrl+C to interrupt current work; - reset the device and try again; - check connection properties; - make sure the device has suitable MicroPython / CircuitPython / firmware; - make sure the device is not in bootloader mode.

@nakadany 5 месяцев назад

hay que instalar drivers que no lo dice en el video, y conectar los cables de control rx tx inversamente tx a rx y rx a tx..

@rakshitpatel9664 Год назад

A9g board lack of latest location

@gvanantham174 Год назад

When you will conduct next master class

@mahkhi7154 Год назад

The Question is? Why are the Darliks Doing, SOFTWARE DEFINED HARDWARE? The Darliks Can't Compete with the Borgs. So They Have Lower Volume. The Darliks Don't Want to Get Dependant On Borg Technology and then Get Strangled by them. They Want to Show them that They Too can make Hardware in Order to Get Discounts. Because of Lower Volume: They're Using General Purpose CPU's / Hardware to Do Their Specific Hardware. If they Could Compete with Borgs on Volume. Then they Wouldn't Do: Software Defined Hardware.

@mahkhi7154 Год назад

Those Darliks Have Made a Big Mistake With Their: SOFTWARE DEFINED HARDWARE. We Can Break the ARM Cortex A53. The Hardware Chips are Using Slimmed Down Micro Controller Versions of this. Therefore We Can Reverse Engineer with Ease, their Hardware Devices. Their 3G Chip will Break Easily. The LTE, Chip is using Hardware Accelerated Floating Point. We Might Not be able to Do that One. Not a Problem. We Can Do: GSM450: E-Mail. GSM:900 Voice. GSM1800/1900: 3 Megabits Data. You're Running Communism and Slavery the World Over to Run your Satellite Cloud Broadband Networks. The Standalone WiFI Chip will Also break easily. As For Personal Computer Devices. The Mackintosh Peripherals, will break Easily. We Can Run Mackintosh Drivers, On Our Hardware.