Make Your Own Battery E Foamer! | Fanttik X8 Inflator | IK Foam Pro

Подписаться 20 тыс.

Просмотров 13 тыс.

50% 1

Today I finally dialed in my own Battery E Foamer solution using high quality products from IK Foamers and Fanttik X8 Inflators. This is a very simple solution so enjoy the video and the bloopers at the end.
Check out my website for more info and giveaways - www.carswithkeav.com
Follow Me on Instagram - / carswithkeav
IK Foam Pro 12 - amzn.to/3QMoFY7
IK Foam Pro 2+ - amzn.to/3GaMiVm
Velcro with Buckles - amzn.to/3SM2Drn
2 x 1 Inch Foam Tape - amzn.to/480fc6T
Fanttik X8 Apex - amzn.to/46kkp8i
30% off Nov 23rd-25th: Black Friday deals + Use Code BFRIDAYX8
30% off Nov 20th-22nd: Amazon Prime + Coupon + Use code BFRIDAYX8
30% off Nov 26th-30th: Amazon Prime + Coupon + Use code BFRIDAYX8
Try Amazon Prime free for 30 days here - amzn.to/3QNREuT
Fanttik X8 - amzn.to/49EI1Y5
30% off Nov 23rd-25th: Straight 30% no code or prime needed
28.6% off Nov 20th-22nd: Amazon Prime members
28.6% off Nov 26th-30th: Amazon Prime members
DIY Detail Products (Chemicals & Microfibers) - www.diydetail.com/?rfsn=79604...
Discount Code CARSWITHKEAV for 10% off
Active Affiliate Link - shop.activeproducts.com?sca_ref=2600661.YNbljSrmHt
Sliplo - HEIDI at or 15% off sliplo.shop/carswithkeav
Gtechniq - Heidi10 for 10% off at gtechniq.com
Blackvue - Heidi10 for 10% off at blackvue.com/ref/Heidi_the_335/
JDCars - KEAV5 5% off at jd-cars.com/?ref=KEAV
Check my Amazon store if you want to buy Gtechniq on Amazon.
Items On The Wall Setup:
WaterDrop Spotless - amzn.to/3ZyUSWX
WaterDrop Refill - amzn.to/3ESv0f8
Flow Meter - amzn.to/3ENhE41
CR Spotless DIW20 - amzn.to/3BV2GXz
Carbon Filter 1 Micron - amzn.to/3t4XpMD
Chloramine reduction carbon filter - amzn.to/3tbh4dS
Active 2.0 from Active - shop.activeproducts.com/produ...
Active 2.0 from Amazon - amzn.to/43q4vZ9
SGS28 Swivel Spray Gun - amzn.to/3dTuKPh
Pressure Washer Hose - amzn.to/3O1HDYp
3 foot Jumper Hose- amzn.to/46BAQxz
MAD Car Care Nozzle Holders - madcarcareproducts.com
3/8 female QD coupler - amzn.to/3xj224e
1/4 Female Quick Disconnect Set for Wall - amzn.to/48EDMuT
Blueseal Garden Hose Retractable Reel - amzn.to/3RHqdox
Fixfans Pressure Washer Hose Retractable Reel - amzn.to/3LKlZc9
Essential Washer Hose - amzn.to/46z7PCH
Flexzilla Swivel Hose - amzn.to/45urvqp
Brass Garden Hose Angles - amzn.to/3YQ848y
Ridge Washer Nozzles - amzn.to/46cNbbE
15 inch heater hose - amzn.to/46rSP9o
3/4 female npt to 3/4 female ght adapter - amzn.to/3t9JW67
3/4 male npt to 3/4 male npt adapter - amzn.to/3ZTkGgV
3/4 male npt to 3/4 male ght adapter - amzn.to/3RE9v9t
DigiFlow 6710 - amzn.to/3zFsrfa
Amp Meter - amzn.to/3zJtgU4
Blue Monster Tape - amzn.to/3ZArFep
Union Valve - amzn.to/3jSv2wI
Union Fitting- amzn.to/3E7ZMRs
Washing Machine - amzn.to/3K7rktU
Stainless M22 to 3/8 plug U shape Items:
3/8 stainless elbow - amzn.to/3E55ljg
m22 to 3/8 female -amzn.to/3Xv22Jp
3/8 male plug - amzn.to/3YAirxy
Products I use
Active Short Gun - shop.activeproducts.com?sca_ref=2600661.YNbljSrmHt
Cart - amzn.to/3jNalzz
Refill Resin 2 Liter - amzn.to/3JcUa8g
Solo Battery Powered Sprayer - amzn.to/3u6IxKe
Kingkast Waterproof Gloves - amzn.to/3oGitnZ
Syphlid Waterproof Garden Shoes - amzn.to/31Cdhc9
Awesome Multi Tool "Wonder Wrench" - amzn.to/3ghAOTM
Heavy Duty Hose shutoff Valve - amzn.to/3NPcPdQ
De-Ionization - amzn.to/3yNH8bZ
VE52 Pressure Washer - amzn.to/3fWWqp9
VE52 Pressure Washer Alternative (Same unit different cosmetics) - amzn.to/2WrBNK6
MJJC Foam Cannon - amzn.to/3v00rO6
MJJC Site - www.mjjc.com/collections/foam...
Firehose Nozzle - amzn.to/3d9SKLv
Garden Hose Quick disconnect - amzn.to/2Ya7uG6
Brass Garden Hose Shutoff valve De-Ionization - amzn.to/3d39O93
Pressure Washer M22 to 3/8 Quick disconnect - amzn.to/3xB7DkZ
3/8 quick disconnect - amzn.to/37HzIeA
Drill Brush Rim Twister - amzn.to/3bGAIDj
Small EZ Detail Brush - amzn.to/3i72Qzu
Tire Brush - amzn.to/3ARRh9X
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
#cardetailing #foam #inflator

Авто/Мото

Опубликовано:

19 ноя 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@maryhoffman2547 8 месяцев назад

Awesome idea! Your bloopers have me dying! Thank you for sharing. Have a great and safe holiday

@CarsWithKeav 8 месяцев назад

Have a great safe holiday as well!

@Admin-ie9hp 11 минут назад

Can you do a whole car with product in one tank with the small iK sprayer? I bought the small one and everything you had in the description lol 😆

@MarkRidge-yf5kq 5 месяцев назад

Love your tutorials and expertise, i have just purchased both phomers and charger and need to no everthing you said and showed the best ways to bring it all togeather. Many thanks: mark.

@CarsWithKeav 5 месяцев назад

Awesome, let us know how it works for you!

@Jurban5 3 месяца назад

I just got my x8 apex pump for my ik foam pro 12 for at work. No more hand pumping anymore! I got the other items you linked but for time sakes, I had to purchase the 1x1 foam but I can make it work. Also appreciate the added bonus that I can now pump up car and bike tires now too. Appreciate the easy tutorial for a good solution.

@CarsWithKeav 3 месяца назад

You’re welcome. Hope it works out well for you! My son uses mine all the time for his soccer ball.

@theunkownmr.562 5 месяцев назад

I appreciate the insight, Keav! I knabbed an X9 Pro and scrap. I'll be testing it on the same products as you. 😊

@CarsWithKeav 4 месяца назад

Awesome, let us know how it goes.

@ThisOldDetailingDude 8 месяцев назад

Great Hack! I will be buying both soon! Thank you 🙏

@CarsWithKeav 8 месяцев назад

Awesome, let me know How it works for you.

@LasseJohannsen1 8 месяцев назад

Nice One. I have the same setup on my ik foam pro 12. I used really strong magnets attached instead of Velcro. 👍

@CarsWithKeav 8 месяцев назад

Magnets is a great idea. Cool way to do that would be electromagnets with a power switch to turn on and off and the it comes right off.

@flowinthrou 6 месяцев назад

I have made some of these sprayers with my one devices and they are really useful to me, because I don't have garage. The velcro system of mine failed and I have the air compressor really free now and I hold it with my two hands, you don't use the other hand anyway. I don't leave it to top up and stop pumping, because I want to avoid backpressure and breaking down of the compressor due to liquid intake. I always start spraying before it tops up and I release pressure as soon as I finish.

@CarsWithKeav 6 месяцев назад

I have done the two hand method and both of the velcro straps on the IK expensive compressor failed at the plastic buckle. Appreciate all the info!

@TheJeof1000 4 месяца назад

thanks for the tip.

@CarsWithKeav 4 месяца назад

You’re welcome

@diydetailofficial 8 месяцев назад

Thanks for using DIY Detail products.

@CarsWithKeav 8 месяцев назад

You’re Welcome

@hankypancky 17 дней назад

Just placed my order with Amazon for the IK pro 2 and the air pump, was trying to find the smaller one, but after seeing what the bigger one can do, ordered that instead

@CarsWithKeav 17 дней назад

Great choices either way. I have heard of you can 3d print there are files out there for a mounting bracket for the Fanttik inflators.

@e90steez 8 месяцев назад

Thanks for testing those out, I’ve been thinking of getting a compressor for the new multi pro 12+. I’m planning to use it for rinseless washes, I have been using a Bauer handheld compressor for my foam pro 12 and I just need to fill it once for most of my uses. I’m just not sure on a bike compressor or the IK one. Do you notice a difference in the strength of pressure at all? I read that the IK goes up to 2.5 bar/36 psi, I like the automatic feature of the IK but if the bike pump is just 1 press and has a stronger output then I think that’s the better option.

@CarsWithKeav 8 месяцев назад

The IK for sure maxes out way below the potential of the tank. The auto feature is what makes it worth it. The nice inflators and compressors make it run at a much higher pressure and it performs so much better at that higher range.

@e90steez 8 месяцев назад

@@CarsWithKeav thanks for the response, I figured as much. I just bought the Ik compressor the other day anyways cause it was on sale, I think the auto feature would be great for the multi pro 12+ cause I have full size truck and don’t want to fill it up with air more than once. Appreciate the feedback!

@mincooper 2 месяца назад

Great idea for the IK Foam Pro 2 Plus. Instead of velcro, there is a 3d printed bracket/holster on Maker World. Also adding a quick connect allows fast install between sprayers.

@CarsWithKeav 2 месяца назад

Sounds like a great idea and I have heard there is a 3d bracket. Problem is there are really good cheaper battery power sprayers now and IK is coming out with their own later this year. Still a great idea if you have an existing IK Pro 2+

@mincooper 2 месяца назад

@@CarsWithKeav Hoping you do a review of these new battery powered sprayers. I really like my IK Foam Pro 2 + sprayers but they are quite expensive so if there's a decent quality electric sprayer on the horizon, that would be awesome.

@CarsWithKeav 2 месяца назад

@@mincooper I’ve done a few recently that are good cheaper options.

@Ranguvar13 2 месяца назад

I’m looking but not seeing it on Maker World, any tips?

@CarsWithKeav 2 месяца назад

@@Ranguvar13 I think it’s this one. makerworld.com/en/models/466401#profileId-375382

@DownloaderVideo Месяц назад

Great video as always Keav, quick question….I already have an IK Pro Foam 12 and a Multi Pro 12+ that I use with the Fanttik X8 Apex…both work great, I also have the little 2+ foamer like you in the video. Knowing what you know now would you say it is worth it to get the small X8 to pair with it or would you go for one of those battery foamers that you have on your channel? If so, which one? Thanks in advance!

@CarsWithKeav Месяц назад

If money was no object I would always go with an inflator style IK. Of course they are coming out with their open battery foamer coming out later this year as well. This setup is going to be more durable and spray better than the battery foamers from Amazon. Check out Etsy as well people selling 3D printed brackets to hold the Fanttik inflators. If not for sale they are giving out the files so you can 3D print your own.

@DownloaderVideo Месяц назад

@@CarsWithKeav Thanks, it also doesn’t help that I can’t get off my mind how cool the little 2+ ooks with the X8 😂. What I realized is that I can use the X8 for the 12 Multipro + too as the non foaming sprayers don’t require as much air while running so I think it might be able to keep up….good excuse to buy it right? 😂😂 Anyways, is there any link with the info on the upcoming IK sprayers? Thanks!

@CarsWithKeav Месяц назад

@@DownloaderVideo No links yet that I know of. They announced it on a live stream at The Rag Company and showed it is action. Check their TRCMA podcasts in their RU-vid channel it was on of those.

@HoLDoN4Sec 6 месяцев назад

Any good alternatives to the Fanttik X8 (for the pro 2 plus)? The Fanttik X8 seems to have been replaced with the X9 Pro However i liked the fact that the Fanttik has this auto-refill function and does not require having to manually press the refill button every few seconds. Are there any alternative air pumps you are aware of that have an auto-fill function like the Fanttik X8 shown in the video?

@CarsWithKeav 6 месяцев назад

I’m have not really tried any others. They sent me the X8 apex so didn’t need to purchase one for the big IK. I picked the X8 for the smaller IK because it had better dimensions for the setup that the X9. They are still selling both X8. I hear the X9 is very good though.

@HoLDoN4Sec 6 месяцев назад

@@CarsWithKeav the X9 seems like a really high quality air pump for sure, its just really pricy in my case (its a little bit above my import tax free laws so in total with shipping its almost 125$) Which is a little too much for what it is

@dandydonslife9869 6 месяцев назад

Can this sprayer the IK pro + be converted to use as a rinseless wash sprayer?

@CarsWithKeav 6 месяцев назад

Yes, you can spray rinseless wash in them gives a little more suds to help with cleaning. I use DIY Detail rinseless wash as a pre-wash sometimes and it sprays on real nice. You can control how wet or foamy it is with just the dilution.

@mrcerebrosus1701 6 месяцев назад

What is the maximum pressure I can pump into this foamer? How much should I set on the compressor?

@CarsWithKeav 6 месяцев назад

Small IK Foam Pro 2+ the relief valve kicks off around 50 to 52 PSI. The larger IK Foam Pro 12 kicks off around 57 to 58 PSI. I’ve pushed at 100 PSI rate before out of my compressor the relief valve will pop off. Better to set compressor around 60 PSI.

@user-vf8wp4do6b Месяц назад

ikform2+…Is there a sponge in between?

@CarsWithKeav Месяц назад

Yes there is.

@viniciusvale42 8 месяцев назад

Does this velcro tape also sell on Amazon? Do you have the product link? Thanks.

@CarsWithKeav 8 месяцев назад

Here you go amzn.to/3GdN0RK Thanks, I forgot to put in the description.

@viniciusvale42 8 месяцев назад

@@CarsWithKeav thank you very much!!

@djkeithjust 6 месяцев назад

Do they make the Ik in in between size?

@CarsWithKeav 6 месяцев назад

Not currently. It would be the perfect size too.

@stephenkim7502 7 месяцев назад

You get to mess with an X9 at all? Curious if you think the X8 is good enough if being used just for the IK Foam Pro 2+. Trying to see if it's worth spending the extra money on an X9

@CarsWithKeav 7 месяцев назад

X8 is more than enough. I chose it over the X9 as it’s dimensions fit better. The X9 is much taller and X8 is wider.

@stephenkim7502 7 месяцев назад

Thanks Keav

@garciasautomotivedetail5196 5 месяцев назад

Keav. Where do I purchase small IK foamer with small battery pack please. Enjoyed content

@CarsWithKeav 5 месяцев назад

Everything is in the description. Would have to purchase multiple products and put it all together. The IK, the Velcro straps, the foam and the inflator. No way to buy them as one product. All available on Amazon.

@DownloaderVideo Месяц назад

@@CarsWithKeavI swear to God man, some people just don’t take the time to watch the video and just come up with silly questions. Excellent video brother, loved it.

@CarsWithKeav Месяц назад

@@DownloaderVideo Happens all the time. Some get confused and it sounds like they didn’t watch and others plainly don’t watch. Appreciate the kind words as well!

@rhsab1 8 месяцев назад

I don't see the X8 on Amazon.

@CarsWithKeav 8 месяцев назад

Sorry about that. Had the wrong link. Here you go amzn.to/49EI1Y5

@rhsab1 8 месяцев назад

Thank you!@@CarsWithKeav

@milazemay 8 месяцев назад

A $130 compressor? That doesn't have an auto-start function? .........Why?

@CarsWithKeav 8 месяцев назад

Find me one that has an auto start as I could not find one. The IK e foamer one is the only one I know of that is small enough to use for this setup, but can’t be used for other things as you don’t know the PSI or can change them.

@Ranguvar13 2 месяца назад

Xiaomi 1S! Hold left button and press right button 5 times! Made a video short on my channel

@DownloaderVideo Месяц назад

@@Ranguvar13Bro, were you kidding? Bought one and can’t get it to do that. Would you upload a video of it? Thanks

@Ranguvar13 Месяц назад

@@DownloaderVideo Xiaomi 1S hidden hold PSI mode, video for you ru-vid.comSurSSic2fM0

@Ranguvar13 Месяц назад

@@DownloaderVideoI uploaded a short for you it’s on my channel, my comment with a link isn’t showing up