Make your own SIMPLE 5x5x5 RGB LED Cube (Part 2)

Подписаться 2 млн

Просмотров 360 тыс.

50% 1

Part 1: • Make your own SIMPLE 5...
Facebook: / greatscottlab
Twitter: / greatscottlab
Support me for more videos: www.patreon.com/GreatScott?ty=h
More information on Instructables: www.instructables.com/id/Make-...
In this 2 part video series I will show you how to build a simpler version of a 5x5x5 RGB LED Cube. The driver circuit only consists of an Arduino Nano and the programming is rather simple due to the FastLED library.
Parts List (affiliate links):
Aliexpress:
1x Arduino Nano: s.click.aliexpress.com/e/QBqzZ...
150x PL9823 8mm LED: s.click.aliexpress.com/e/_dT3...
1x Veroboard: s.click.aliexpress.com/e/_dVy...
3x PCB terminal: s.click.aliexpress.com/e/_dYb...
2x Female header: s.click.aliexpress.com/e/_dY3...
1x Toggle Switch: s.click.aliexpress.com/e/_d9d...
1x 10k Potentiometer: s.click.aliexpress.com/e/_dX8...
1x DC Jack: s.click.aliexpress.com/e/_d6c...
Silvered Copper wire: s.click.aliexpress.com/e/_dUh...
1x 5V Power Supply: s.click.aliexpress.com/e/_dST...
Amazon.de:
1x Arduino Nano: amzn.to/1k2lfiB
150x PL9823 8mm LED: amzn.to/1NtX4DR
1x Veroboard: amzn.to/1Ky7A8A
3x PCB terminal: amzn.to/1GzZAZw
2x Female header: amzn.to/1IMwUZK
1x Toggle Switch: amzn.to/1GlYVHo
1x 10k Potentiometer: amzn.to/1k2lsT2
1x DC Jack: amzn.to/1NtXgmx
Silvered Copper wire: amzn.to/1Ppyh3B
1x 5V Power Supply: amzn.to/1RGHOo5
Ebay:
1x Arduino Nano: rover.ebay.com/rover/1/711-532...
150x PL9823 8mm LED: rover.ebay.com/rover/1/711-532...
1x Veroboard: rover.ebay.com/rover/1/711-532...
3x PCB terminal: rover.ebay.com/rover/1/711-532...
2x Female header: rover.ebay.com/rover/1/711-532...
1x Toggle Switch: rover.ebay.com/rover/1/711-532...
1x 10k Potentiometer: rover.ebay.com/rover/1/711-532...
1x DC Jack: rover.ebay.com/rover/1/711-532...
Silvered Copper wire: rover.ebay.com/rover/1/711-532...
1x 5V Power Supply: rover.ebay.com/rover/1/711-532...
Aliexpress:
1x Arduino Nano: s.click.aliexpress.com/e/QBqzZ...
150x PL9823 8mm LED: -
1x Veroboard: s.click.aliexpress.com/e/zNJu7...
3x PCB terminal: s.click.aliexpress.com/e/aYrJE...
2x Female header: s.click.aliexpress.com/e/yBUrz...
1x Toggle Switch: s.click.aliexpress.com/e/EYvnM...
1x 10k Potentiometer: s.click.aliexpress.com/e/3rjYb...
1x DC Jack: s.click.aliexpress.com/e/I6Y3j...
Silvered Copper wire: s.click.aliexpress.com/e/bIyFY...
1x 5V Power Supply: s.click.aliexpress.com/e/rzfeM...
Music:
In the Hall of the Mountain King, Kevin MacLeod (incompetech.com)

Наука

Опубликовано:

31 окт 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 339

@Uncle_Buzz 8 лет назад

Yes on the custom animations video! Cheers, Chris.

@camilomason4560 6 лет назад

who's chris

@JetJockey87 8 лет назад

At the start... I can do this easy. By the end... Damn thats a lot of work!

@ogiller 8 лет назад

The simplified design is great, this might finally get me to build one. Please add a video on how to program animation.

@drag0n123432 8 лет назад

Great video as always! Really inspiring project, I didn't know these LEDs existed in this package. I would appreciate a programming tutorial, because I find it hard to develop algorithms for my 4x4x4 RGB LED Cube.

@andrewmarbaniang 8 лет назад

Finally, I was waiting for this 2nd part so eagerly. Can wait to build one..

@naamloos246_ 8 лет назад

please do the animations video! :D nice project

@CrashOrgasm 8 лет назад

love the construction and explanation. Keep up the good work!

@amircogs 7 лет назад

love it! you made it really simple for beginners thank you.

@TheRadiogeek 8 лет назад

Wow! I wished I had that kind of free time! Nice project!

@lordtylus9262 8 лет назад

I really like this project. I think I got the part with the LEDs, and connecting them up with each other, but sadly you lost me at the part with connecting the power supply and the arduino.

@vidm96 8 лет назад

Looks great! I'd love to see a video on creating animations for this cube. How much did this cube cost in total?

@greatscottlab 8 лет назад

+vidm96 Around 60-70 $

@BernhardHofmann 8 лет назад

+GreatScott! would it be much cheaper with an MSP430? I'd also like to see the code to drive the LEDs. Thanks for another (two) great videos!

@3zuli 8 лет назад

+Bernhard Hofmann The Arduino Nano costs $2-3, so MSP430 isn't really cheaper than that.

@MrHamsterbacke756 8 лет назад

+Bernhard Hofmann Just take the price of an arduino and subtract it with the price of the MSP430.

@mwerner_ 8 лет назад

Me also!!

@HassanETECH 8 лет назад

great as usual. keep going mate.

@Cestacular 8 лет назад

Fantastic video, Im going to give this a try and build a christmas tree instead of a cube!

@64bigfish 8 лет назад

GreatScott! another awesome video.

@norm1124 8 лет назад

Super schön, sieht nach sehr viel Arbeit aus. Und die Lötstellen sehen Topp aus! Gratulation. Freue mich auf die Erklärungen zur Animation. Yes please.

@stefanschmidt1725 8 лет назад

+norm1124 Er hatte im ersten Video nen 10x10x10 Cube glaub ich und der ist noch mehr Arbeit

@knutejay 3 года назад

Marking the locations with solder is so clever!! 1:02

@pappy1812 8 лет назад

Excellent video. I would love to see a follow on one showing how to create the custom animations...

@linusXXL 8 лет назад

Erst mal richtig geile Videos produzierst du und ich wollte dir nochmal ein großes Dankeschön aussprechen, da ich durch dich jetzt weiß was ich studieren werde richtig cool machst du das ich Feier dich !!!

@engineer0239 6 лет назад

Linus Mann hier ist einer der es durch ihn auch weiß

@alainDenis6990 8 лет назад

Thank you for this second vidéo.Great job.

@pnuema1.618 3 года назад

finally a video I understand of yours!

@franmaric 8 лет назад

Please do a video for programing the animations!

@kanugolu15 3 года назад

Lt of patience is needed for the job thanks for video

@iMadScience 6 лет назад

you did a really great job to simplify the light cube, we can drive it with just a Arduino! But I still have a little confuse of the led circuit. I have to study the circuit.

@VladDElectronics 8 лет назад

GreatScott! good job

@RaoulRacingRC 8 лет назад

Could you make a video about programming your own animations for the cube?

@robfel68 8 лет назад

Hello Mr Scott. I would immensely enjoy if you could do a video tutorial regarding custom animations. Keep up the good work Scottie.

@hunterskillz123 8 лет назад

Nice video! A suggestion for straightening wire: Try using a drill. Put one end of the wire into the drill, and hold the other end with whatever you want (if you bend it you can even use your hands). Then run the drill. Don't go too fast though, or the wire may break. This makes the wire more sturdy than it originally was in my experience. I was also wondering how the data is clocked in. I see there are Vin, Vout, Din, and Dout pins. How is each bit clocked in? Is there an internal clock? If so, what is its frequency? Otherwise, how does the LED know new data is available?

@wonhoyi1164 8 лет назад

Hi, I have build a same cube following your instruction. Same type of data corruption occured, So I thought I would have to solder all the horizontal connections of VCC and GND for LEDs but, it turned out to be different frequency from power supply and arduino. (I was powering up arduino with USB port then). After some testing with few LEDs on bread board, it worked fine once they had same power source. Thanks to your video, I managed to build one too. (it doesn't look as nearly neat as yours though!)

@JeffreyVastine 8 лет назад

GreatScott, custom animation programming would definitely be super cool mate, especially the animation of letters and numbers. Is there a way to control the brightness of individual leds? This could be useful for replicating ascii art in light, but naturally a larger cube or flat matrix would be best for such things and I imagine that the same principles and techniques apply and are scaleable to create whatever you desire.

@Kostanj42 5 лет назад

omg that looks so cool!

@Oscar230 8 лет назад

I would like to see the programming behind this, how you can controll so much data with just a few wires. :D

@VintageElectronicsGeek 8 лет назад

Nice wire strippers, what brand? Like those better then the two jaw type that strips horizontally!

@plongkie224 7 лет назад

Me too, I hope to see the tutorial for animations/codes for this cube.. Please GreatScott..

@Kalaakaar-in 8 лет назад

Yes I would like to see custom animations.

@nosafetyswitch9378 7 лет назад

i am so doing this when i have time.

@RossPotts 8 лет назад

Yayayyyyy! Part 2!!!

@Tchefter 8 лет назад

Holy Moly, was ne Löterei. Sieht Klasse aus!!!

@Daveplayz-hr8kv 3 года назад

A big like again I love it 👍👍👍👍

@mr.basicprojects7279 5 лет назад

So cool. Thanks for sharing

@3dfreakful 8 лет назад

very good tutorial

@philkey6470 8 лет назад

Looks great in the end, but i personally have to say, that i liked the conecpt of your first RGB Cube more. With normal RGB LEDs, TLCs it just looks like its more/better even though this one is much simpler.Just my personal opinion

@guillaumereitzer9609 8 лет назад

Nice video !

@tungruffel 8 лет назад

Great video! How do I know what resistor to use?

@SuperBubbaO 8 лет назад

Hi, great videos I always enjoy watching them. But I have one question about the power wiring. Although I have wired everything as you described, I still have data corruption at the third layer. I have tried changing the voltage slightly and replacing some faulty looking led but to no avail.

@AllegoriCalD 8 лет назад

Love this channel

@ASILLAL 8 лет назад

As always nice video Please make a video on air purifier (negative ion generator) Thanks

@douglasquaid1418 8 лет назад

Can you make a video about the oscilloscope ? I like your videos very much i look every day if a new video is online

@rafac13 8 лет назад

nice project!

@deangreenhough3479 8 лет назад

Great Scott! Another Great Video! Yes more about the code and also scaling this up to 8 x 8 Please

@rubenangel6746 8 лет назад

Hola excelente trabajo!!! una pregunta el software y/o programa para hacer funcionar el arduino y el cubo??. Saludos y gracias

@franmaric 6 лет назад

Make a video about custom animations! It would really help me and others

@KJudera1 8 лет назад

Would love to see the tutorial! Awesome video ;)

@Tyzon201995 8 лет назад

What might be the reason for thee weird behavior at 5 volts? Is it possible to happen the same in WS2812B too?

@spawnsetsuna1 8 лет назад

Nice video thank you very much

@dragothicdragothic2541 6 лет назад

Very nice cube. Is it possible to make 5x5x5 cube with normal 8mm leds and how?

@Vansinn 8 лет назад

Please do a video about programming a led cube

@oskarosaurus8770 8 лет назад

would be rly cool if you could make a Video on building a mechanical Keyboard

@T3Beatz 8 лет назад

Great Part 2, please do the custom animation video

@Laziter73 8 лет назад

Great tutorial, I'm going to have to build myself one of those :) One thing though; Why didn't you export the micro USB of the Arduino Nano to the base case? That way you would only need to hook up a cable to re-program it instead of lifting the top off.

@arv1ndgr 8 лет назад

Custom animations video would be awesome!

@meteorshower8160 8 лет назад

seems pretty cool, I just don't have the patience to solder all of that..

@umarulamri8853 8 лет назад

nice, got idea to make something beautiful as gift.. can you show how to make 8x8x8 led cube using arduino nano please

@dc26dc 3 года назад

Great ! Did you manage to add your own animations ? if yes, how did you do it ? Thanks

@brandonpais2532 8 лет назад

great video! very informative as usual.. I was wondering if you could show how you could program the first LED cube that you made. it was a very satisfying build for me but i still don't know exactly how to fiddle with the code a bit.

@greatscottlab 8 лет назад

+Brandon Pais I think I talked about the code in the third part of the series. I will not go into more detail than this. Sorry.

@gdettori 8 лет назад

What about a video about shift registers?

@RedflowHD 8 лет назад

Please do the custom animations video...

@lenhumbird 5 лет назад

Very good tutorial! Are there any design considerations of doing a larger Arduino-based cube using ONE data pin vs. one for each layer? Also, it's been almost 4 years since your video and I have found VERY FEW cube projects that uses addressable LEDs (PL9823, WS2811, APA-106, etc). Care to comment?

@vladmirputin7139 8 лет назад

Could you do a video showing us how to do an rgb cube with a rainbowduino?

@adithyamoodi8173 7 лет назад

hiii..... plz upload some tutorial videos of programming for 3D LED cube

@tommidtommi 8 лет назад

Echt schöne Anleitung! Der Würfel ist toll geworden aber über ein Video über die Animationen würde ich mich noch freuen.

@TurbineResearch 3 года назад

I want this in my house but want nothing to do with building it hahaha. Well done ! It's awesome

@incorrect1844 8 лет назад

Pleasure to watch German perfectionism

@kiliangroten4635 5 лет назад

Wouldn't it be easier to solder the pattern in first place and then sticking it in and adjusting? Or would that make it harder?

@jasonfontanoz 8 лет назад

Very cool!

@inferno6012 6 лет назад

great video

@dc26dc 3 года назад

Great movie. I'm not so familiar with electronics, and in the link you provides, the 5V power supply cannot be changed to 5.5 V as in the video. I have a question please: 5V might make trouble, so you set to 5.5. Could you, instead, put a different resistor? maybe with lower resistance ? Thanks

@NoOne-gm3lf 8 лет назад

great project as alwways but you sould make a video about programing the animation that will be awesome just to learn how to programme!

@Veso266 8 лет назад

can you make a video on how to make LED display?

@jase4772 3 года назад

Well you make it look "easy" but I'm up for the challenge, just need to find the time!

@petervlaar9610 8 лет назад

nice video but how do you make custom animations?

@Pankaj-sk4jl 5 лет назад

Very like it but I need without microcontroller Dancing light

@DineshYadav14 6 лет назад

What about the custom animation Programming? Please explain the programming

@alphredblock3413 5 лет назад

I would like to see how to create animations. Nice cube geeat job man. 👍👍👍

@pofkena 8 лет назад

I like to see the programing

@ugodecarlo4 8 лет назад

sorry i don't understand,why you make four holes for 4 wires in a top for data in to data out, when there are 5 rgb leds in a vertical line? can you explain to me? thank you.