No video :(

Making A Big Cedar Bar Sign Using Our Newest Router Bit

Подписаться 61 тыс.

Просмотров 25 тыс.

50% 1

Episode #817 Today, we're introducing the newest router bit to our arsenal! This this is AMAZING! We're using it on a large Cedar bar sign. If I was using our normal 90 degree bit, this would've taken twice the amount of time.
3/8" 90 Degree Bit - makeawoodsign....
6" Clarendon Set - makeawoodsign....
9" Beer Mug - makeawoodsign....
Router Bit Depth Gauge - makeawoodsign....
Base Plates - makeawoodsign....
Router Bits - makeawoodsign....
Surface Bit - makeawoodsign....
Dewalt Router - amzn.to/3V6hM5C
Milwaukee Router - amzn.to/3RIb02O
Ferry Lights - amzn.to/3YJd92y
DeWalt Disc Sander - amzn.to/3e4aUVL
DeWalt Random Orbital Sander - amzn.to/3Cyo7PM
Spray Primer - amzn.to/3RGcXwT
Spray Clear Coat - amzn.to/3EgYS61
DeWalt Angle Grinder - amzn.to/3WZO4Qu
Kutzall Extreme Course Disc - amzn.to/3hOB9AT
Kutzall Medium Disc - amzn.to/3EDkl8m
Super Gloss Epoxy Resin - amzn.to/3AgPNXW
Dewalt Die Grinder - amzn.to/3SlnFuK
Kutzall Extreme Flame Burr - amzn.to/3kgdnPU
Foredom Rotory Tool - amzn.to/3XQYKQJ
Green Tape For Transfer - amzn.to/3ZqM7wP
Freezer Paper - amzn.to/3IE1R97
Mullet Tools Dust Collection - mullettools.com?aff=27
Use Code MAKEAWOODSIGN for 5% off
Email List - makeawoodsign....
Starbond - bit.ly/3hcIhnq
Use Code Makeawoodsign at checkout to save up to 15% off on your purchase
Our website for Sign Carving Supplies: www.makeawoods...
We also have 2 online courses. We have a FREE Video Course. 7 Steps To Sign Carving Basics. Here’s the link www.makeawoods...
Plus, Ryan & I completed a paid course titled ericrhoten.pod...
Check these out and let me know if I can answer any questions for you.
If you don't know where to start, Here's our Small Beginners Sign Carving Kit
www.makeawoods...
My favorite router bit, www.makeawoods...
My Dewalt DWP611 base plate www.makeawoods...
Comments or Questions, my Email: eric@makeawoodsign.com
Vicki's Email: vickiwithdavesigns@gmail.com
Free router bit sharpening service now available. Learn all about it & all the Premium Membership Benefits.
www.makeawoods...
Here's a link to our Amazon Affiliate Store www.amazon.com...
“Get the Freshest CA glues on the market from Starbond. Here’s the link
bit.ly/3hcIhnq
Use Code Makeawoodsign at checkout to save up to 15% off on your purchase”
Instagram: MAKEAWOODSIGN
Facebook Page: www.facebook.c...
Links to the SCOTD albums on our F/B page:
SCOTD 4
www.facebook.c...

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 115

@garyzellner9938 6 месяцев назад

Great looking sign !! Naturally, the thought was planted .... now on my way to the frilg.....

@oldave100 6 месяцев назад

😂😂Thanks Gary! Grab one for me too!

@Mrwolfpack85 9 месяцев назад

That new bit is an answer to prayer! Just spent well over an hour cleaning out some background, which is typical. Looking forward to cutting back on that. Just ordered!!

@oldave100 9 месяцев назад

Right on, man! We appreciate the order. You're gonna LOVE this thing!

@thomaschandler4831 7 месяцев назад

Beautiful work brother 🏆

@oldave100 7 месяцев назад

Thanks buddy!

@ravenheart1439 Месяц назад

Beautiful..just got your base, just subbed lol .love router work so figured I'd try, first go went better then I thought I could do on scrap white oak at that lol..been milling white oak for days ..but if you see this, thank you, hope to get it like you my man ..

@oldave100 Месяц назад

We sure appreciate the support, man! Carving really isn't all that hard. Be sure to send in a picture of some of your work for our sign carvers of the day

@mariovasquez6954 9 месяцев назад

Great job Ryan, that is one good looking sign!!

@oldave100 9 месяцев назад

Thanks Mario!

@SawdustmakerLori 9 месяцев назад

Dang.....that is a game changer bit! It sure would have saved you a lot of time on some of the big signs you've made in the past. Eric better hide that bit when you move to Arkansas or Ryan will go wild and have all the tree trunks on the property carved with designs. LOVE how the sign turned out. It's AWESOME!!!

@oldave100 9 месяцев назад

😂😂😂 it would make short work of them!

@patrickfee5065 2 месяца назад

Awesome sign

@oldave100 2 месяца назад

Thanks Patrick!

@chrismiller8264 9 месяцев назад

Beautiful job Ryan!

@oldave100 9 месяцев назад

Thanks Chris!

@PopsCustomSignsLLC 9 месяцев назад

That looks like a hoss of a bit! Beautiful sign, Ryan....well done!

@oldave100 9 месяцев назад

Thanks Frank!

@officialchenal564 2 месяца назад

Wow Carving 👍

@oldave100 2 месяца назад

Thank you

@burtgraham3689 9 месяцев назад

well done Ryan

@oldave100 9 месяцев назад

Thanks Burt!

@canadiangent123 6 месяцев назад

Beautiful

@oldave100 6 месяцев назад

Thanks buddy!

@emilkiyak2344 9 месяцев назад

Ryan...that is a work of art. Greta job. have to add that new bit to my collection.

@oldave100 9 месяцев назад

Thanks Emil! It's an awesome bit

@thomasmiller143 9 месяцев назад

Beautiful,beautiful workmanship

@oldave100 9 месяцев назад

Thanks Thomas!

@BOTzerker 9 месяцев назад

Gotta admit, that sign makes me thirsty!

@oldave100 9 месяцев назад

😂😂 me too!

@HandmadeWellmade 9 месяцев назад

Top job ryan and love the subject matter lol

@oldave100 9 месяцев назад

Thank you buddy ❤

@Pete.Ty1 9 месяцев назад

👍👍👍.Thanks Ryan

@oldave100 9 месяцев назад

Anytime, buddy!

@papascruffy 9 месяцев назад

Nice job and what a hunk of cedar!

@oldave100 9 месяцев назад

I LOVE this stuff!! Wait till you see what we did with the rest of it! That video will come out late November

@robertspina4503 9 месяцев назад

I love using cedar

@oldave100 9 месяцев назад

Same here, buddy!

@billlarrabee9436 9 месяцев назад

Great sign and that bit is awesome!

@oldave100 9 месяцев назад

Thanks Bill!

@danyodice1048 9 месяцев назад

Nice job...🤘🤘🤘🤘

@oldave100 9 месяцев назад

Thanks Dan!

@Luvs2fish76 7 месяцев назад

I have a question for you guys. Why don’t you or should I use a bowl bit to clean up the scalloping in and around the art not the edges but everything else to make a smoother look. Btw just started following you guys, love the tutorials and the banter between you and your dad.

@oldave100 7 месяцев назад

😂😂Thanks man! We have a lot of fun working together. You definitely could use a different bit for a smoother look, and maybe we'll do that in the future. We just like the rough texture look.

@millspaugh2000 9 месяцев назад

Awesome sign !!

@oldave100 9 месяцев назад

Thanks John!

@pamelaberry4520 9 месяцев назад

Great job! I like the new bit.

@oldave100 9 месяцев назад

Thanks Pam!

@Tex8814 7 месяцев назад

What a beautiful sign. Love the way that clear coat adds the finishing touch. I haven't tried painting parts of my signs, yet. Did you use gloss or semi-gloss paints?

@oldave100 7 месяцев назад

We almost always use One Shot automotive paint. It covers really well and it's exterior

@Charles1971ify 9 месяцев назад

I'm sold on this bit already.

@oldave100 9 месяцев назад

Dude, it's awesome!

@John-mv7wu 9 месяцев назад

Nice job Ryan im going to check out that new bit I just finished a large sign this would have been alot of help

@oldave100 9 месяцев назад

Right on man. It's a HUGE benefit

@warrenstillson4580 3 месяца назад

Is a slower speed, better for carving letters,

@oldave100 3 месяца назад

No, we keep our routers full speed when carving. The only time we ever turn them down is if we're surfacing a board on the router sled

@littleliftera8244 8 месяцев назад

Awesome videos I noticed you said you prefer a flex trim router instead of a plunge router. Can one use a regular router and just buy a separate base? I tried using a plunge router years ago and damn it was so difficult….your videos re inspired me to try again.

@oldave100 8 месяцев назад

Usually the large routers come with the plunge and fixes base so you can use either. We like the trim routers just because they have plenty of power to do whatever we need them to and they're smaller so easier to maneuver.

@williambowens8291 Месяц назад

Nice work. I have both the large and small beer stencil. What color yellow are you using for the beer? I was going to purchase the 5 half pint sample cans and it comes with a yellow but it looks a bit light.

@oldave100 Месяц назад

I'm not 100% sure. I can't look right now cuz we're in Utah. Shoot me an email ryan@makeawoodsign.com and when we get back in town I'll look at it for you

@Mike-ou5ps 9 месяцев назад

Howdy Guys.... Nice video. I finally got around to getting myself a Carving Liner and a Profile bit. Ive been using just a 60° and just tilting the router for sharp edges and Dremel for higher detail. I was surprised when i heard you say "10 to 12 coats". Im curious, was that specifically just because you was going to do painting on top of it? When the painting was done, did you add additional coats of Clear ontop of the painting? Looking forward to the next videos. 😀

@oldave100 9 месяцев назад

The more coats, the better the finish looks in my opinion. But it was mainly for the painting. There's no need for another coat after the paint

@carvedsignsbradleyalan7785 9 месяцев назад

Love it!

@oldave100 9 месяцев назад

Thanks man!

@sbs128 5 дней назад

Great video. I’ve recently started doing this. How did you do the texturing though?😊

@oldave100 5 дней назад

Thank you! I basically move the router in random circle patterns and it comes out like this. The bits you use will have a huge effect on how the background turns out as well

@robertheld4947 4 месяца назад

Great job Ryan, curious to know how big your board is?

@oldave100 4 месяца назад

Thanks Robert! I believe it's about 16"X30"

@officialchenal564 2 месяца назад

Nice 👍

@geeman5294 4 месяца назад

Instead of painting ,and getting drips ,try posca paint pens

@oldave100 4 месяца назад

We'll give those a shot!

@ronbeard8856 9 месяцев назад

Nice work

@oldave100 9 месяцев назад

Thanks Ron!

@rogercourtney8376 9 месяцев назад

Nice job

@oldave100 9 месяцев назад

Thanks buddy!

@sidewayzlaband6523 9 месяцев назад

Have you guys tried airbrushing instead of painting?

@oldave100 9 месяцев назад

I've tried it. man it's tough! I really want to get good at it but dang!

@thewoodsandwaters Месяц назад

where do find the tape you used to hold the template on......thanks!

@oldave100 Месяц назад

Here you go Tombow Adhesive Tape - amzn.to/47pdiMT

@rwardlaw1 9 месяцев назад

Nice work. You said you linked everything in the description but I didn’t see a link to the paint you were using to paint the beer mug. Also, do you have to seal the sign again after you paint it.?

@oldave100 9 месяцев назад

Oh man, sorry about that. I don't have the link right now but just go on Amazon and look up One Shot paint and there's a ton of different colors on there. And no need for more sealer after the paint.

@officialchenal564 2 месяца назад

Nice 👍

@247Combat 9 месяцев назад

@ericrhoten looking to buy a router, would u recommend the Flex trim router or that new milwaukee 1/2 plunge router kit. Mostly want to carve out signd and stuff like yourself?

@oldave100 9 месяцев назад

I don't care for using a plunge router for carving signs. It's too bulky and really not necessary. I love the FLEX trim router. It's super powerful, comfortable, the batteries last a long time and if you get it before the end of this year it's 100% lifetime warranty

@247Combat 9 месяцев назад

@@oldave100thank you for your reply, I just picked up the flex and ordering your base plate and blades

@markfree5248 9 месяцев назад

❤

@oldave100 9 месяцев назад

👍👍👍

@monteashmore3730 9 месяцев назад

Great video. I haven't heard, how's the move going?

@oldave100 9 месяцев назад

Slow going, but making progress

@randombroncosfan8095 9 месяцев назад

Woo Pig Sooiee!

@RAcreativewoodworks 9 месяцев назад

nice work and great video. hey do you offer a set of bits that you recommend thanks

@oldave100 9 месяцев назад

We sure do. You can check out all of our bits right here. makeawoodsign.com/collections/router-bits If you're just starting out, I recommend the profile, 60, and 90 degree. You can do %75 of all your carving with those three bits.

@RAcreativewoodworks 9 месяцев назад

Thank you

@officialchenal564 2 месяца назад

Good 👍

@williamlouis5011 9 месяцев назад

Is the new bit a 1/4” shank?

@oldave100 9 месяцев назад

Yeah, just like the others (except the surfacing bit) it's 1/4"

@MrAbsolutkaos 2 месяца назад

Where can I get the plate you’re using

@oldave100 2 месяца назад

Here's a link to our base plates 👍👍 makeawoodsign.com/collections/acrylic-base-plates

@jamesholder5613 9 месяцев назад

This is gorgeous! Where did y’all get this beautiful thin piece of cedar??

@oldave100 9 месяцев назад

Thanks buddy! That's from a bunch of cedar our friends brought us. I can't remember where they got it.

@JohnClark-tt2bl 9 месяцев назад

You guys ever misspell something on a sign? Seems like something I would do before realizing it halfway through.😅

@oldave100 9 месяцев назад

😂😂😂 Oh yeah. More than once! But, never on a really big sign. There's ways to fix that, but man it sucks

@mariovasquez6954 9 месяцев назад

I have, and I didn't catch it till I delivered it,but she took anyway, she said it would be a reminder that we're not perfect.

@jepsdog3859 7 месяцев назад

Heck yea ! Like the old addige measure twice cut once , spell twice carve once , also getting caught up in your work and missing a letter, then trying to fit it in . 😮