No video :(

Making a Carbon Fiber, Marble, and Copper Wedding Ring!

Подписаться 865 тыс.

Просмотров 573 тыс.

50% 1

Literal blood, sweat, and almost tears went into this one, so I hope you enjoyed it! Subscribe for more videos like this one.
This was a fairly complex ring and needed a lot of explaining as I was making it so the video ended up being really long, I'll try to keep my next one about 10 minutes in length. Please let me know in the comments what you'd like to see me do for my 10,000 subscribers giveaway!
My website where you can purchase this ring made by me: patrickadairde...
My ring supplies website where you can get supplies to make your very own rings: bit.ly/2yPhGpC
SECRET FOR MY RU-vid VIEWERS:
You can get 10% off any order on my website by using code "youtube10" at checkout on my website
If you're interested in supporting my channel and getting exclusive rewards in return, then check me out on Patreon: / patrickadair
Check out my Instagram to see all of my work: goo.gl/MpnhKq
LIST OF JUST ABOUT EVERYTHING YOU'LL NEED TO START MAKING RINGS:
(By using these links to purchase supplies, you'll be supporting my channel because Amazon gives me a small referral bonus on every purchase you make using my links to their site. You can change your bookmark for Amazon to this link: amzn.to/2kyp3gP and every time you use the link I will get paid by amazon for everything you purchase within the next 24 hours.)
LINK TO GET FREE AMAZON PRIME TRIAL SO YOU CAN GET FREE SHIPPING ON EVERYTHING: www.amazon.com....
LATHE: amzn.to/2lgqflZ
DRILL PRESS: amzn.to/2lUbfgT
CARBON FIBER: goo.gl/BcTL0N or goo.gl/j4HH44
DUST MASK (Please always use one when working with carbon fiber or other materials that make a lot of dust): amzn.to/2ltj7oC
EXPANDING RING MANDREL: goo.gl/WlnvSn
DIAMOND HOLE SAW KIT: amzn.to/2lglwka
SANDPAPER: amzn.to/2lglCbw
EXTRA SANDING DRUMS FOR DREMEL (you'll use a lot): amzn.to/2lgotl2
POLISHING COMPOUND: amzn.to/2l479Bf
CLAMPS: amzn.to/2ltl4BV
ELECTRIC TAPE: amzn.to/2kI27qD
RING SIZER: amzn.to/2lgtBpi
STRONTIUM ALUMINATE (glow powder): Search eBay for it, I buy it from a user named Krypto-Nyte (link to his eBay store: goo.gl/YthkjF) you can also purchase it at technoglow.com
COLOR PIGMENT (This is what I use to colorize glow powder): amzn.to/2kIcryK

Опубликовано:

5 апр 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 433

@PatrickAdairDesigns 5 лет назад

Visit my ring supplies website to start making your very own rings: bit.ly/2yPhGpC

@randyspence4780 5 лет назад

I like to have one of or ring 14 inches bet I don't have the money

@michaelcastelan4370 7 лет назад

Hey Patrick, new but big fan, when drilling through marble or granite, make sure your bit is obviously diamond coated and second don't keep going up and down with the press. The repeated pressure is what makes it break so just let it spin and go down slowly and consistently while keeping it lubricated. I work with granite and quartz as my job and know how fragile it is but that should help a lot

@michaelcastelan4370 7 лет назад

Patrick Adair Designs I love your rings dude. I have a thing for rings and these are right up my alley and your process is very simple but beautiful. Very well designed

@samrobins4280 7 лет назад

Michael Castelan b

@XicD 6 лет назад

Michael Castelan I bet this is his job too

@BurningTurtle98 6 лет назад

I don't think you know what you talking about. Personally if i were the one making the videos, and i had someone leave a comment as informative and well thought out as the one you are responding to (as opposed to the kind I'm sure you'd leave on a video if you saw them doing something different than you would do, "Tat not how u do tat stoopid"), I would appreciate the input regardless of whether or not the person commenting was saying something i already knew. Constructive criticism is how people learn.

@antimattermemes3491 6 лет назад

as someone also in the granite business, i agree with Michael Castelan

@pinkrainclouds2190 4 года назад

I cant get over what a hot mess it looks like up until the very end and then its magnificent!

@jonathanmellette8541 4 года назад

Things I love about this video: 1) You talk about having 10k subscribers. Now you have over 500k. Congrats man, a dream come true, I'm sure. 2) You show your mistakes. As a jewelry maker on the hobbyist level, it's so nice to know I"m not the only one that can have a crappy day when it comes to trying to get something done. Thanks for showing us the difficulty in cutting that marble. The videos that make everything look SO easy hurt my soul when I try and have problems ;) Congrats on an amazing talent, an extremely successful RU-vid channel, and all that goes along with that.

@liamc1102 Год назад

The talent comes from consistent work & love for the craft.

@chrismechanic2000 7 лет назад

i like your work patrick, just a few tips for you, the reason the granite is breaking is because it is not supported correctly, look back at your vid and you can see it flexing under the cutting pressure, you need something harder than a few strips of wood under it, a slab of alloy would be better, and support all of the marble not just the edges. also try mounting or clamping the dremmel to the tool post of the lathe for more accurate results when you are grinding down to a final size, this will leave you with alot less runout. for good results in machining a good setup is usualy more crucial than cutting for a good result with less runout. if you have any questions feel free to ask.... great vid.

@GearheadDaily 6 лет назад

My very same thought.

@larryspiva7390 6 лет назад

I am not Patrick. I just wanted to let you know that tip is going to help me. I was just going ask what is the best way for a beginner (My self) to start.

@drewmalesky9869 6 лет назад

Awesome work! I have an idea for you. State rings. Every state has a state tree and a state mineral. For example, California would be Redwood, and serpentine.

@projectnostalgia5427 5 лет назад

Me being sad because i'm aussie and Queensland wouldn't be made

@JPK1981 2 года назад

Highly doubt you'll see this message on such an old video, but you can truly see and even watch you grow and progress through your videos. Fantastic work! Even mesmerizing! Can't wait for my ring to arrive...😁

@Imwright720 5 лет назад

You have to support stone very evenly when drilling. The camping down, which you realized, plus a solid base will help with a successful hole. I would hot glue the stone to a piece of mdf in the areas that aren’t rings and just hold it with your hand.

@eddieagha5851 4 года назад

This video is old, so you may have already done this but if you fabricate or buy a tool holder to mount on the lathe bed for your Dremel your facing-off for your rings will be less time consuming and more precise. Also from one stone cutter to another support whatever you are cutting on the bottom and clamp from the sides only with soft bumpers. I like your work!

@dank9427 6 лет назад

October 2017 here. In 6 months, Patrick went from 10K to currently 73K subs. Great job, huge channel growth!

@jeremy7356 6 лет назад

Dan K * 80k

@aaroni6172 6 лет назад

Dan K 84k now

@alyksjames1603 6 лет назад

90k

@malaise92 6 лет назад

112!

@Orphican 6 лет назад

121k !!

@RenghisKhan 5 лет назад

Been a joy watching your video. About the drilling, what the marble guys say. And the water is not just for lubrication but also against friction heating. Stones are prone to (emotional) breakdown when they don't get heated evenly. Drilling when the material is already in a bath of hot water might yield a more consistent result. It will definitely be more messy though...

@papnlilly 6 лет назад

Hey mate great channel! I drill through marble, glass and porcelain all the time. You've gotta have a completely flat surface otherwise every time you apply pressure the twisting and flexing caused by an uneven surface will break, snap and shatter these materials every time. Hope that helps for next time. Your a great artist and I love your rings!

@Nikenik2001 6 лет назад

Interesting video, didn't know anything about ringmaking before. Don't forget you can add voice over to your videos when you're doing things like sanding and polishing. Just saying "And now I spray on some water and polish with 320 sand paper" makes for a nicer viewing experience then silence. :)

@twutle 6 лет назад

This would look sooo good with white ceramic

@even0dds585 6 лет назад

This is one of my favorite rings. I love the look of copper against dark. My all time combo is copper and dark hunter green. Amazing work! Someday Ill order!

@kellymichel7679 5 лет назад

Very unique and beautiful, helluva job!!! 👍❤👍❤👍❤👍

@nishant007engg 4 года назад

Your mind is very superb to do some extra with other ,i appreciate your hardworking.

@TheMacClayne 7 лет назад

I prefere the ronded shape of your first ring than this flate one, but it's just a matter of personnal taste :-P I see you are making progresses, your store web site evolved too. Things begins to be serious ^^ I hope you have great success anda lots of orders :-] keep going

@davidcort2857 4 года назад

You are a master Sir.

@HUNtastic1 5 лет назад

Wow! Your work is amazing! I can't stop watching your videos....

@raachedhenia2177 7 лет назад

hey patrick I am an 16 year old boy from belgium and i just got subscribed to your channel. I alread love your work. keep up the good work and i hope your channel will grow a lot more also for the give away you shoud do an titanium and meteorite ring (that's my personal favorite)

@eslc1614 7 лет назад

Absolutely LOVE this ring. The price is a little steep for me but it's by far the best ring I've ever seen!

@Triumvirate888 7 лет назад

I would love have one of these, but with white carbon fiber, white marble, and brass loops.

@thatonetable7150 6 лет назад

I never thought rings could look so cool

@ericberger394 5 лет назад

Really nice ring

@lipeakter1590 2 года назад

Love from bangladesh. We are your big fan sir. The people of bangladesh are like your videos sir. Love from bangladesh.

@bjrnovevad620 6 лет назад

That.ring.is.amazing.

@Deerslyr81 4 года назад

Bud 16:45 you got .003 run out by hand!!! You are the man and that’s why I’m subbed and now looking to get a lath and all the equipment I need to start building rings hopefully a 1/16 as good as yours! You have and suggestions on the equipment you don’t sell on your website? Thanks for your time, and keep pumping out those awesome videos!

@MaryOKC 4 года назад

Excellent workmanship!

@Cornet_Tooter 6 лет назад

You're a braver soul than I, putting your fingers that close to the chuck!

@IgotHeliFever 6 лет назад

Hey Patrick this ring made me Subscribe finally !!! what a Beautiful Combo !

@charlescraig4611 7 лет назад

Michael Castelan is correct...From a thermodynamic point of view when drilling something hard but brittle like marble...A lot more speed, a lot of liquid and less pressure downward...Hope this helps...Great work...Would love a price but with 14K White gold instead of copper and white marble...Let me know what price you'd want...Love the work

@thomasraseta5024 7 лет назад

Very nice video but I would make one suggestion for you, I noticed you used diamond platted core drill bits. I'd recommend Sintered core bits, they have diamonds embedded within the metal not bonded on top. leaves a cleaner core and lasts about 30 times longer which will bring your costs down :). you can buy them pretty cheap on ebay. I'm a jewler and lapidarist and love carving stones. Good luck and great vids

@thomasraseta5024 7 лет назад

Patrick Adair Designs they will work on that as well. if the plated cuts through it then Sintered will as well. diamonds are the hardest known substance and cut thru anything. only difference is Sintered last much longer because as the metal is worn down thru use new diamonds are exposed. look them up online to get a better explanation then what I have said, you won't be sorry that's for sure. I quit using cheap plated bits long ago. enjoy 😃

@danielblackburn4626 7 лет назад

You might try 3M Trizact Sanding / polishing pads, you can cut them into manageable strips and use similar to Emory cloth, multiple grits. Also, you could install felt pad tool to the dremel / grinder and apply polishing rouge paste while on the lathe.

@boobunn4151 5 лет назад

this is a really elegant ring, very manly in a reserved way.

@miropribanic5581 5 лет назад

wonderful idea and design, and you have a very interesting collection on your website, too.

@jim_8621 5 лет назад

Damn. That's a nice ring. I would like to have one too.

@gregfarr1 5 лет назад

I enjoyed watching this build

@danielblackburn4626 7 лет назад

Another inlay idea Maybe try clear glass micro-spheres and Ceramic micro-spheres of a variety of sizes to create clear voids for the inlay.

@ToggBott 5 лет назад

I do love to watch a fellow artist.

@johnny0110 7 лет назад

Dude, nice!!! Just got my lathe. I'll be making some sweet rings soon! Thanks for the videos!!!!

@440exbeast8 6 лет назад

For the give away ring you should make it out of pink and purple glass blended together to make a space effect and use carbon fiber in the out side

@philipdegenova6926 5 лет назад

Fine Piece Of Work. Fascinating To Watch True Craftsmanship Unfolding Step By Beautiful Step. One more thing..........I'd really love to see an inlay of 24K gold rather than that of copper. This is not to say that copper isn't beautiful in its own right - but it's just that I have this odd fetish for this - the most marvelous of all materials on earth - - solid gold. The weight; the color; the glistening quality and the exquisite feel of the most precious metal there is [Im my humble opinion.]

@lindasandidge7471 2 года назад

I'm a new fan! I love it!!! Just beautiful!

@barbaracorry4199 2 года назад

WOW! I can only wish (DREAM) about making rings. I have been turning pens for 6 years. What does a ring like that sell for, and, do you know of anyone who teaches classes on this art. What you just did was masterful and produced a beautiful piece. Thanks for sharing.

@area85restorations75 5 лет назад

Mad respect for failing 3 times and keeping going!!!

@zukarnainsalleh8348 6 лет назад

I love the way you used different materials to produced a ring. Can i request that you create a ring using jade. Maybe a combination with other materials would be nice. Love your work..

@thizizliz 6 лет назад

Stunningly beautiful.

@MangeDT 7 лет назад

clean the pieces before assembly? mabye? roughing up the surfaces a little would also give increaced gri

@builtunique_1689 5 лет назад

I love to see more glow inlay rings.

@JoeB55 5 лет назад

You should cover your lathe ways from the grinding dust or it will destroy the machine

@Robokong84 7 лет назад

try a gold and meteorite ring, It might look really cool

@sweenytwain7095 4 года назад

I'm a new subscriber just now... By accident my RU-vid started your video and it was interesting Keep it up... Enjoyed your craftsmanship✌

@christophermoran8961 6 лет назад

Legit just found this guy on youtube cuz I watch blacksmiths and im gana start saving up to buy a ring they're too 🔥🔥🔥🔥🔥

@bjrnovevad620 6 лет назад

This ring in bog wood would have been super cool. I mean carbon fiber helps with blending natural and old fashion with new and modern, but the bog wood would have this natural organic feel to it. That's what I think

@johnathansekscinski3343 6 лет назад

I would like to see marble, copper, and cherry wood.

@CastleBricks 6 лет назад

Hi Pat. Beautiful work, man ! Great thx from Denmark

@DaniyalKhan-pm5zz 5 лет назад

I would love to wear a ring on my wedding made by you❤ cuz by then i can watch it how it was made 😍😍 (I hope i will manage to afford it😂)

@alansmith9099 6 лет назад

Absolutely amazing.so clever ,well done.

@MikeSnap85 5 лет назад

Very cool ring man. Nice work!

@HulloItzMe 7 лет назад

what about maybe a white granite/marble ring with either gold or a semiprecious metal inlay? I love the black rings but maybe a white ring would be pretty cool!

@HulloItzMe 7 лет назад

Patrick Adair Designs Yeah that would be awesome! Or perhaps (if you can get your hands on it, I'm not sure of its structure) a white Kevlar material.

@CJDubbs 7 лет назад

Beautiful ring.

@backonlazer791 6 лет назад

I actually like your old one better. The slightly rounded shape and stronger hint of green make it more... striking, I guess? I also like the thicker copper pieces.

@Rachel-wz1qm 6 лет назад

This ring reminds me of the flooring of some five star hotel. Not entirely sure why, but that's a compliment.

@gojifan54gaming15 6 лет назад

I like the way it looks at 20:58

@davidpascoe3672 5 лет назад

Good looking ring dude... Nice job...

@Dragonass18 4 года назад

If you painted the inner part of the marble white would more of the green come through?

@cathycurry1 7 лет назад

Fantastic!

@broganakerman1657 5 лет назад

You could use the half pice for a carbon fiber and marble ring

@gugaroc 7 лет назад

Nice vídeos dude!

@l3d-3dmaker58 7 лет назад

the most beautiful thing ive ever seen omg

@bags4649 7 лет назад

Nice rings designs mate, curious on where you find your black ceramic ring blanks, couldn't find them on the ring supplies website that you linked

@alvarock65 Год назад

Very nice making! Thanks for sharing! May I ask how is that lathe chuck for rings named or where can I buy one? Thanks!

@iRDude415 7 лет назад

As always you never fail to impress haha keep em up! :)

@thebestprankprank7033 6 лет назад

Much more interesting than the other videos The ring is awesome I assume it took you much more time

@jerryocrow1 5 лет назад

Consider getting a copy of Machinery's Handbook to help you with learning about holding the work, holding the tool, and holding the process. Too much random error that you can get rid of. Love your passion.

@michaelpaulpadillamdacgrou7904 4 года назад

A piece of ply wood under the Marble would help support it

@rushsr201 5 лет назад

Or a titanium starters ring I like the blue

@thisdude53 6 лет назад

you might want to verify your speed on the drill press or use a better coolant than just water as well

@danieltenoriocruz1719 7 лет назад

i am start sharing your videos they are awesome

@joeyolson6171 5 лет назад

hey patrick could you do this ring but with a white marble?

@shanemcardle9574 6 лет назад

Great ring

@MrF0Xy 5 лет назад

wow .. i want like this Ring

@defenestrate977 6 лет назад

Hey my dude :) can you use: Titanium as base that replaces Carbon Fiber, replace the dark color Marble with white/light colored precious material (maybe ivory, white marble... open for suggestions - although it would be great to preserve the accents of glow like it is seen on Luminous ring, and Gold for Copper ?

@BritoWorx 5 лет назад

Absolutely beautiful

@xplosivrounds6128 6 лет назад

yeah too much pressure via the vise. also a wetsaw used for cutting marble has a constant flow of water, you dont want the blade to dry out at all.

@aussieangie9399 5 лет назад

**accidentally gives couple beat up ring** ... “Accidentally” ;)

@AndreyLis 6 лет назад

it's very cool, a great master of rings

@littleboy437 5 лет назад

Good Job 5 Stars

@heartfang21 6 лет назад

i wonder what would happen if you put a shiny white strip of something behind the marble to reflect light; and how a shiny white surface would vary from a flat white surface in regards to color and brightness.

@scrappiron6347 6 лет назад

I just noticed as i continued watching tge video that u have the actual ring on as a wedding band...😃😄

@Ayamewilson 5 лет назад

I think you should do this again but with the knowledge you have obtained from working with different materials maybe even change things up slightly.

@fredbabilone7929 7 лет назад

Very Nice job guy, I think I Will make my first try very soon. I guess it is much harder than it seems to be 😉

@kirkhollis7550 2 года назад

I want a size 10!!!!!!!

@xXBallistic82Xx 7 лет назад

Loctite also makes an apoxy resin which would be great for this.

@theatomicscotsman1624 7 лет назад

You should do obsidian Damascus and amethyst

@bbarker5766 6 лет назад

As a machinist I am wondering why you used your dremel to size it but then went back and used your lathe to get it to final specs? Use your lathe to do that work and you wont fight the squareness of the ring in those situations.