#diycuttingboard #woodworking #woodcraft #learnwoodworking #wood
In this video I'll go over the process I use to make all of my cutting boards. I don't have a fancy work shop as you can see in the video. All you need is access to some tools and some wood from your local lumber supplier. The hole was drilled with an inch and half hole saw and then rounded with the same router bit used on the outside edges.
I failed to mention in the video but I sand the board at 80 grit then 120, raise the grain, 220 grit, raise the grain again, and then finish it off with 320 grit. The higher you go in the grit of sand paper the smoother it'll be.
I Hope you enjoy the video and thanks for watching! Please Subscribe :)
-- LINKS --
(As an Amazon Associate I earn from qualifying purchases.)
Tools/products used in this video
► Dewalt Planer: amzn.to/3Nl5aTZ (Amazon)
► Titebond 3 Wood glue: amzn.to/3wABT1I (Amazon)
Software, websites, and plugins used
► TubeBuddy: www.tubebuddy....
To watch how I encased coffee beans into epoxy creating a serving tray watch the video below!
• Walnut and Epoxy Resin...
DISCLAIMER: This description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to making videos. Thank you for the support!
1 окт 2024