What's up Boys! 🙌🏽
Finally I had a chance to make another display rack for more trucks I have to open! Filled up the first one pretty quick. In this video I show how I make one for myself.
Subscribe to my channel:
/ rivera078
Instagram:
riveras_hotwheels
Post any comments or if you have any questions below.
If you get any ideas by this video and you make one for yourself, post a RU-vid video of it and paste the link to your video below in the comments. I would like to check it out.
Materials used are:
1/4" plywood
1x4 pine boards (3/4" common board)
wood glue
1" finishing nails
1-1/2" wood screws (for the frame)
Warning! 🚨
This is NOT a "How to" video. I show how I make my own measurements and how I cut all my material to make my display rack. I use my table saw, a miter saw, air nail gun and a cordless power drill. If you intend to make your own display rack please be sure to follow all safety measures to use power tools and read all owners manual material supplied by each tool manufacturer. I will not be responsible for any injuries or damages you may cause by following this video. Do it at your OWN RISK. Children NEED adult supervision at all time while handling any type of power tools. Please note, this was my warning to you. If you didn't read this part or can't read, that's not my problem...
Thanks for Watching! 👍🏽
29 май 2016