Making a new Router table (Part 1); an Unquendor Guitars Weekly Update

Подписаться 18 тыс.

Просмотров 2,2 тыс.

50% 1

It's time to upgrade the workshop some more.
This week I've started building a new router table.
In this video I'm preparing the lumber for the frame.
I'm trying my hand on some mortise and tenon and corner joints with which I'm not that familiar.
Making your own workshop equipment and tools is a good way to learn and practice new skills.
This is not exactly a tutorial on how to make a router table, but I'm showing you how I made mine.
If you like to see a more detailed video on how I made my router table, or have any questions, please leave a comment down below.
Unquendor Guitars :
Website: www.Unquendor-Guitars.nl
Instagram: www.instagram....
Facebook: / unquendor

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@alessandropiresfilms1363 2 года назад

Very good! Showw

@PeeterJoot 8 месяцев назад

I got nervous watching your fingers as you routed stuff with your old router table. You'll need all those fingers to test your guitars!

@mrfrontranger7911 4 года назад

Tom from gray guitars and of course Ben from crimson guitar both were men in sheds. 🤗

@UnquendorGuitars 4 года назад

Thank you Mr Frontranger. I don't dare to compare myself with Ben and Tom, but I try to keep improving.

@renzovdwolff Год назад

Ziet er goed uit, heb je misschien ook tekeningen hoe je het gebouwd hebt?

@seanbrown9045 4 года назад

Hi I really enjoyed watching your router table build. I loved the attention to detail in it. I have just bought the same router as you and would like to make my own table based on this design. Is there any chance you can send me a list of all the materials you used to make table? It would be greatly appreciated. Thanks

@UnquendorGuitars 4 года назад

Thank you very much and I'm glad you liked the videos. I don't have a list of the materials used at hand at the moment, but I will try and send you one later today.

@seanbrown9045 4 года назад

@@UnquendorGuitars that'll be great thank you

@UnquendorGuitars 4 года назад

Hi Sean, I couldn't find my original sketch and had to remeasure everything. So the dimensions might not be 100% accurate but it will give you a good estimation on the required materials I hope. All Dimensions will be in metric millimeters if you don't mind. For the Frame: Uprights: 4pc: 950x44x44 - Pine Sides: 4pc.: 420x44x44 - Pine Front and Back: 6pc: 720x44x44 - Pine Side Panels: 2pc: 880x350x5 - Hardwood Plywood Back Panels: 1pc: 650x330x5 - Hardwood Plywood 1pc: 650x530x5 - Hardwood Plywood Front Panels: 630x310x9 - Hardwood Plywood Cut in the pattern for the drawers and small door. 630x510x9 - Hardwood Plywood Cut in half for the two doors Shelf and bottom: 2pc.: 665x368x9 - Hardwood Plywood Drawer side inserts: 2pc: 370x300x9 - Hardwood Plywood Router cabinet dividers: 2pc: 368x342x9 - Hardwood Plywood Drawers: Sides: 8pc: 365x110x9 - Hardwood Plywood Front And Back: 8pc: 140x110x9 - Hardwood Plywood Bottom: 4pc: 130x355x5 - Hardwood Plywood Sliders: 8pc: 360x11x6 - Mahogany Hardware: T-Track: 2pc: 50x19x10 Hinges: 10pc: 40x32 fixed pin (but any small hinge will do) Casters: 4pc: 70mm high (2 with brake) Triton Copy ring set Baseplate Aluminium strip 10x2 +/-540mm Power plug, socket, switch and wiring (Please check your local regulations) I hope this helps you getting started on your project. f you have any further questions please let me know. Good luck and have fun building.

@seanbrown9045 4 года назад

@@UnquendorGuitars hi, that is fantastic, thank you for that. I will definitely look forward to having a go at building the table. Much appreciated.

@UnquendorGuitars 4 года назад

No problem at all. Please let me know how it turned out if you can.