Making a plywood floor and covering with vinyl in a Ford Transit Custom 

Hello. Thanks for viewing and your kind comment.

Hello. Thanks for viewing and commenting. I bought 2 packs of 12 lengths I believe, bought from B&Q. 1 pack was not quite enough. Fixing the batton down with sikaflex rather than screwing into the floor has worked fine too.

@@royclark8385 thanks. What is a length. I’m looking at 38m??

Hello. Thanks for viewing and kind comment on our build. I bought it for eBay.. Striped Vinyl Flooring Roll Bamboo Style Wood Planks Foam Sheet Lino Bathroom Item number 123213907365 We are really pleased with it as we installed a bamboo worktop and table. It appears to wear well too, although as it is foam backed, anything pressed into it (like a screw) will leave a mark.

I bought my entire units including worktops from a company called Evo motion designs. www.evomotiondesign.co.uk Not cheap but quality is pretty good.

Hello. Thanks for viewing and commenting. I used stainless steel screws, I think from memory they were 25mm. I only screwed into the Sikaflex down wooden batten, as I did not want to create unnecessary holes in the actual van floor. My logic was the weight of the bed(80kg) which is bolted through the van floor, the units plus the Sikaflex batten would hold the plyboard floor in place.

Hello. I had to buy 2 packs of batton as one pack was not quite enough. Yes we carpeted the sliding door and barn doors but only the blind surround and the original hard board panels that came with the van. So yes we do have a very small amount of metal work uncarpeted but I wanted it that way to offer some contrast.

Brilliant thanks. Loving the super fast response as well 😂👌🏻

Hi. Thanks for viewing my video and taking the time to comment. We used 2 cans to lay the vinyl and it was purchased off ebay for around £80, item number 123213907365, I purchased 3m × 2m.

Hello. Thanks for viewing my video and commenting. I used SIKAFLEX 221, I tested it on an old piece of wood which I applied the SIKAFLEX too and stuck it to another piece of wood and it stuck incredibly well, so was confident it would work for the batto