Making a Signet Ring with Waxcarving / Silver Jewelry Making Full process 

Hi, where can I learn this beautiful art?

They probably had someone else do that part.

Shouldn't that part still be added to the video.

For me is okey, every máster has his tricks, i mean, is not needed to reveal the whole process.

My friend was a jeweler. I used to watch him carve and caste. To me, the most interesting part was making the “tree”! Then making the mold.

Literally the only reason I watched this. 🙄

언제나 재밌게 시청해 주셔서 감사할 따름입니다 ;)

And nice video of course, sorry to be rude. Nice of you to show the process, I'll try it

looks like a regular strip of sandpaper with a piece of extra wax used as a sanding block. Sanding blocks are very common accompaniment to sandpaper in many applications and can be made from just about anything.

​@@-NGC-6302-yes, you're probably right

Ever hear of Nike ....just do it 😂😅😂 !! Think the brands of wax are from a company called Ferris range of soft medium and hard waxes for casting .

안녕하세요 영상 관심 있게 봐주셔서 감사합니다. 따로 블로그를 운행하지 않아 앞으로 유튜브에 도움 될 만한 영상을 업로드하겠습니다! 감사합니다

Hi,I oxidized it and blackened the inside of the ring's bezel.🙏🏼

Yes, that's right. The wax is cast in silver through a lost wax casting technique

@@ape_object What a pity this technique is lost.

The mold is the white investment outside the wax, but yes you have the idea

@@samydc310 Can you reuse the mold indefinitely?

@@Staroy I've only seen either dissolve it in investment or break it because they used normal cement You could make 2 halfs, sure but the liquid could seep through the half line and that would lead to silver or gold wasted

감사합니다!!🙏🏼✨

Thank you so much for watching my video! I'll make more useful videos and show you! Thank you :)

감사합니다ㅜㅜ!! 앞으로도 좋은 작업 보여드리도록 노력하겠습니다

Thank you so much💪🏼✨✨

The tools used by each country are slightly different. Most of my tools were purchased from local stores. I wrote down the names of the tools in the contents. They can be purchased on Amazon or AliExpress🙏🏼

A rod-shaped measuring tool is available. The desired number must be centered on the ring😁

I will try to post more tutorials in the future. Thank you for making my work worthwhile🙏🏼

작업물을 좋게 봐주셔서 감사합니다 :) 앞으로 더 좋은 영상을 제작해서 보여드릴게요! 감사합니다!!