Making a Solenoid 9-Cylinder Engine 

Big thank you for watching this video :) Tools & Machines I used in the project & Timestamps Sherline Lathe: amzn.to/2Mwb6Lh Sherline Milling: amzn.to/2M2k7Nh SKIL 9-Inch Band Saw: amzn.to/35B0nqY Dykem blue: amzn.to/35JCGgp Lathe Mill CENTER DRILL : amzn.to/2R1pA9Q 00:11 making the Front Cover 01:50 making the Rear Cover 03:58 making the Crankcase 07:18 making the Distributor 09:09 making the Distributor Disk 10:47 making the Bevel Gear 13:02 making the Crankshaft 15:48 making the Master Rod 18:50 making the Slave Rods 19:33 making the Pistons 21:09 making the Cylinders 23:10 making the Propeller Spinner 24:45 assembling the parts 25:35 the finished circuit with Arduino 25:42 testing the hall effect sensor

Me and a few friends from school are making a model B17g flying fortress from scratch and figuring out the engines has been the hardest part for us, we appreciate the video showing us how, thank you from all of us

I am a retired mechanical engineer, I worked mainly in development. This video has brought back some happy memories. You have a new subscriber. Thankyou.

I've watched two of your builds. I hope people realize how compressed these were. And appreciate how much time this took. Amazing lathe work. I thought it was all superb!!!

Machining tiny brass bevel gears, detail and skill most RU-vid makers couldn't do

Would have liked to see acrylic front cover. The interior looks so cool and would be nice to see working (especially in slowmo), seems a shame to hide that craftsmanship. Awesome non the less.

Excuse me, the core of your coils isn't pheromagnet. If you will make cylinders of steel or another pheromagnet your engine will be more powerful.

mesmerizing, yet educational. I could spend hours on this channel. I feel like a small child watching dad do what he does, but making sure to stay out of the way because dad asked me to.

Cheese and rice, what planet do you come from? I’ve been an engineer/machinist for over 30 years and know how much work you have put into this project. Very very well done. And you know electronics like Marco Reps on top of your machining ability. Keep em coming.

I would of liked to see it run with a propeller. So that we could better see the motor turning and not just hear it turning. Great job very happy to hit the thumbs up like button.

Me: *having never shown or expressed any interest in engines* RU-vid: May I make a recommendation? Me: Oh go on then.

That was awesome! Including the schematic wiring diagram and videoing the wiring process would have been stupendous. Thank you! Very invigorating!

So... yeah... this is the kind of videos youtube recommends me at 4:00am... now back to sleep. Good job, man. Awesome work.

Muito interessante, ótimo acabamento das peças. Ferramentas de qualidade. Ótimo torno .

It feels strange to say it but those are the prettiest solenoids I've ever seen.

The work that you do is absolutely outstanding and deserves to be captured in 4K resolution!

No Sir, Thank you for taking the time and effort to bring this to us. It is indeed our pleasure. Many thanks from the U.K.

All I can say is a very big WOW!!! Very impressive, sir. You have taken craftsmanship to an extremely high level.

That engine is just Beautiful, I love it! Great job!

The algorithms brought me here as well! Surprisingly enjoyed watching the whole process, wish could have seen the whole engine working in slow motion

A beautiful build! I'd also coat the windings with epoxy so they'd not scratch themselves because of the vibration, and add some oil inside, so the engine would be self-lubricating. Also, at 28:20, it's funny how those meters always have the initial display of 6.66 - especially with the red LEDs looks like a nod to the Escape From L.A. movie's final scene.

New subscriber! I especially like the part being machined shown in the corner. Nice touch.

Utterly blown away by the precision. Great work!!

Mine eyes have seen the glory of the coming of the „cnc maschine shop in a nutshell“ ! I had goosepimpels through the whole video. I am a 72 years old dentist and oral surgeon with a keen interest in mechanics (go figure!) and this is the first time I have seen this equipment. That is a small format but a giant leap in technology. I am genuinely impressed! Thanks for making my sunday afternoon in Mallorca!

I am more impressed with how you know what shape to make the inner weight so that it doesn't vibrate at high RPM.

I have never seen a radial electric engine before. wow!!

It even sounds like a radial engine. As a warbird enthusiast, this makes me happy. Thanks for taking the time to make this.

You have an huge skill and patience. Thanks

I know almost nothing about machining. This makes my brain hurt... and I cannot stop watching! Awesome project, awesome vid!

to assemble such a project would have been cool enough to see...but you did it all!!!!! Bravo!!! liked and subscribed...And i will be showing this to tons of people...Thank you for being awesome

omg, this attention to details. LOVE IT

This guy is a maker on a whole nother level. Excellent work sir. I thought I was a pretty good maker but this is something else. It actually doesn't inspire me to be better, it inspires me to quit and just watch videos from this channel. I could keep making for 100 years and never get on this level. All praise due. You're the GOAT.

Very nice, looking forward to the teflon bobin version and the comparison with the brass ones. You've already eliminated a large frictional losses by using the hall sensors instead of micro switches. Great job, very impressive.😎

I'm collecting my jaw from the floor. Thank you for brightening my day!

Man! You have a wondrous gift. I hope you give thanks for it! Beautifully crafted.

All this hard work deserves much more credit than has been given

Молодец !!! Хорошее терпение и золотые руки !!! Продолжай в том же духе !!! Мне очень понравился твой труд , и мастерство !👍👍👍

If this kinda stuff isn't art I don't know what it.

That was awesome! Thank you for your days of effort for my 25 minute educational bliss

Very detailed on Machining all the pieces on the lathe and then assembling it together. I love projects like this. Thank you for sharing and the time it took to build it. You’re extremely talented and hope to see many more projects of yours. Great work. 👍

The parts seem like a decent size until he picks them up and they're so tiny! It's adorable!

Cool. Thanks for taking the time to do, and show this :)

I was spellbound with this one. Loved it too much. Incredible work!

I'm a computer engineer. Seeing your work I think I failed choosing my profession. Amazing. You are an artist !

You win the “making something incredibly complicated from scratch on youtube” award.

Extraordinary. Thanks for the video. I loved.

As someone who only has basic high school level knowledge of metal working this AMAZES me. :D I loved how simple you make machining those complex components look; the cinematography alone was fantastic not to mention how beautiful the process and final product looked. I could only imagine the passion you have for what you do, and I hope you have many good years making more stunning "art-itectural" mechanisms. :)

This is legitimately so beautiful.

I just love to watch videos like this. Could watch them all day ! Auto Mechanic all my life and, Hope to achieve this level of precision before I die.

Excellent video. Love the engineering skill. I'm an electronics engineer and the wiring and circuit board needed proper housing to be finished off. The coils could of be wound in perfect layers with a lathe. Also showing the Arduino code would of been nice for those of us that love all the details of open source but still wonderful to watch you make this. Well Done.

２９分があっという間に過ぎた動画です。ただただ感心するばかりです

I greatly appreciate the absence of music, thank you! This was both informative and relaxing to watch!

Now you can make the rest of the plane and... "here we goooo!!"🤗

You got me glued to my phone for half an hour!:-) is there anything you can not do? 😁

I'm only a rough old boilermaker, this precision is fascinating to watch 👍

When you are turning the part it's is so satisfying.

Being able to translate thought into G code is an enviable ability worthy of some kind of salute not to mention the gestalt wherewithal to obtain the tools, learn to use them, envision a product, generate a design, order the material, write the code, interface the hardware, have the patience, set up the lighting, record/edit the video and get it on line. As an amateur machinist, amateur programmer and amateur maker of videos I am seriously impressed by this (and know it's beyond the casual plebian viewer to sufficiently appreciate the effort! Lol).

Respect, This looks maybe easy for the most but this person is really high skilled and have perfect machines to make this

Nice craftsmanship and machine work

Wow, that's impressive! Nicely done.

This is amazing. Setting up all the different camera angles must take a lot of time. You deserve more subscribers

So clever design , you are the master of lathe + electronics ...where do you pull all those ideas ? Thanks for sharing.

This is amazing, really nice work.

Beautiful piece of work mate...thanks for all your hard work, true craftsmanship. 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

should put some blades on it and turn it into the coolest desk fan ever :P

In your next video, I would like to see how you design something. I may be a fool for asking, but I think it would be pretty neat to see how you bring these designs from your mind to the final blueprint. Merry Christmas. 👍

All the camera work, sound, and video editing on top of a project like this must make it take twice as long. Thank you sir. Even though you feel alot of reward from making this project, we did too.

I don't know why, but this thing make me the baby's delight. Good job!

Tony Stark’s arc reactor alpha stage. No Palladium core. 😂 This was so asmr! Moar moar!

I wish these things were practical for vehicles because they are just so cool

Insane amount of work just mad props

Something abour your mill is just super charming

This is art

Would be cool to see this a RC Plane... Great Work

Fantastic build! Thumb up!

Amazed. You're some kind of genius.

Anyone else watch these tiny parts being milled/drilled and thinking the whole time "don't break, don't break, don't break..." >< lol

These tools are so cool. How I would love to have a shop with even half of this stuff.

Wonderful piece of work. This is true engineering, well done!

Impressive. I designed and built me a reciprocating solenoid motor back in 1967 when I was in fourth grade. I used a wooden flywheel with copper clad as a commutator.

This is clearly techno porn. So nice machined. Just wonderful job.big like

Really perfect 👍👍👍👍👍👍👍👍👍👍

Nice workmanship!

Oh my God, it’s incredible!!!

i have no idea of what that is but is cool to watch

Can't believe you didn't break any of those tiny bits 😂

Damn fine work I can honestly say that watching this was a reward in its self

excellent design, thanks for sharing.

That's wonderful ! Great work ! How many lathe/milling machine do you have ? What are they ? Thank you :)

Am i the only person just realising that whatever he is makeing at the time its showed in the top right of the video

Your skills are just simply next level! Excellent job!

Some humans are so smart it’s actually insane...I could never dream of having this idea and let alone the skill to actually make it happen...My mind is blown

I have no clue what this is but its very satisfying

who here watched this because it was satisfying?

Finally released from my trance ! Great video !

incredible work

아니 이 동영상 왜 추천 되었고 난 계속 보고 있었지...

Would be cool to see it in a rc plane

Dude, your machining skills are crazy good!

SO impressed how you made this....