MAKING CERAMIC CLAY BEADS from Two Part Molds 

My sincere thanks and appreciation. I wish you good health and happy holidays

this was invaluable, I was wondering how difficult it would be to make ceramic beads from a two part mold, thank you so much for showing your process!

Thanks so much for sharing you have given me so much inspiration

Barbara, I write you from Argentina. Thanks for my inspiration from now. Strong hugs and congratulations!

Carve channels in the mold around the sculpture cavity to allow excess to flow into and make sure the offset is thin enough to cut off this excess.

Your beads are beautiful. What are the molds made from? Thanks.

When making the mold place two marbles at alternate corners of the inside of one half of the mold. Make sure the marbles are not more than half submerged. Once that half of the mold is hardened remove the marbles. Then when you make your other half it will fill in the marble indentations creating a peg-and-hole locking mechanism that helps you better align your pieces. But this will only work right if the two mold pieces are coming completely together and flush upon pressing. See next comment...

what kind of clay is it and at what temp should I fire it and for how long?ty OOPS pardon me you talk about that. Ur um what is cone 10 degrees? I have a kiln that goes to 1500. Is that hot enough? I use it to anneal glass beads

what kind of clay is it and at what temp should I fire it and for how long?ty

@6:53 sounds like someone saying "Help me!"

Wow, your my inspiration , awful work.

Mute mute mute... the music overlay is horrible.