Making Hay spring 2023 with Ford 8n 

first rule of big spinning driveshafts and ptos.... NO LOOSE STRAPS. thats the fastest way to really really ruin your day. one miss step and your hand goes buhbye.

Awesome. Been looking for a video of someone hauling ass down a road with one of these. Thank you.

Alright a tip from my Grandfather, when you are ready to install those transmission boots, put it in some hot water and dish soap for a minute to let it expand, they make them too small now, I actually put on proper some years back and when it got cold it still split, make sure the groove is cleaned out good. Oh when you had that hole too much air, so with new pipe, it’s too rich, the small holes are terrible about gumming out and the ethanol fuel is different weight so idle is impossible to get right. Another tip, in short hay slow down the pto close to 1/3 throttle and it will allow you to pick up better 2nd gear and 1/3 throttle you get most of it at full speed short bay waterfalls bad.

I spent many hours behind the wheel of one of these tractors with a flail mower on it.

Good job but man are u brave reaching anywhere near that spinning shaft!😮

Most hydraulic dip sticks are missing the grab loop because the farmer would unknowingly get the loop caught on the bottom of his pant leg when dismounting and would loose the dipstick, so they would purposely tear the loop off.

That clicking on the rake is normal it’s a slip joint when you make turns it won’t hurt anything with the different size tires

I think I have the same toolbox as you!

I’m assuming you’re using your phone to record? I wonder how well the action cam setting would be while driving

Since you put the original air cleaner on there, you're probably sucking a little bit too much gas because of the resistance of the oil in the air cleaner, so you might have to reach your car rare on fuel side.

if the baler isnt running very good and not tieing give it more throttle our german made one needs almost as much as you can give it or it wounttie correctly

I’m curious how large is the field in acres? Going from 115 to 15 bales is a big difference.

Looks like it could have grown another month bud

I have a question I have a 1954 ford naa600 will this equipment work and if so what is the name of them all

A ton of trees? 2000 lb of trees? A ton is a specific amount of weight! Not a generalization that has no meaning!

Bailor is to much for an 8n I know I drove one for 50 years never bailed just raked with it!!! Their motor not strong enough!!!