Making of 210x310cm (6,8x10,1ft) CNC Router

Подписаться 38 тыс.

Просмотров 152 тыс.

50% 1

Hi, we built a 3-axis cnc router for a company to use especially for machining ACRYLIC, PVC FOAM and 3D terrain models.
Used materials and 2D, 3D drawings:
12 m 90x90 aluminum profile
2,4 m 90x180 aluminum profile
6 m 45x90 aluminum profile
8 x HGH20
4 x HGW25
6,8 m HGR25
6 m HGR20
8,5 m 1,5 module rack
3 x 1,5 module 20t helical gear
4 x Leadshine 86CM85 stepper motor
4 x Leadshine DMA860E stepper motor driver
550mm Hiwin R20-5 ball screw
Hiwin R20-5 T3 FSI ball screw nut
Arel 2,2kW 18000 rpm spindle
Delta 2,2kW spindle driver
dosya.co/uc9hoqdtz8lr/CNC_2D_-...
Web: www.revo.com.tr
Facebook: / revosystems
Instagram: / revoindustries

Хобби

Опубликовано:

3 фев 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 81

@protomake1349 3 года назад

The soldering done at 15:50 to 16:00 was a "cold" solder joint which will fail with vibration or movement. What you want to do is heat up the solder cup with the tip of your iron, fill the cup with solder, then put the wire fully into the solder cup. Before you remove the soldering iron you want to see the solder wick up the wire slightly (and produce a nice fillet) then remove and allow to cool. Will be a superior solder joint. Very cool (and VERY big) CNC router!

@EletricistaEmBrasilia Месяц назад

what a great job. I'd like to know how it is going after years of work. And it'd be interesting if the creator give some insides about what he would change to improve the machine after years of working.

@diyprojectchannel 5 лет назад

You did a really good job! Nice machine. Hope to see it working :-)

@subice21 3 года назад

Beautiful and elegant work!

@GBWM_CNC 3 года назад

Great machine. I do really appreciate sharing.

@scardera 3 года назад

Im planing to build my own, but definitely not that big! Good work, must have been fun putting it all together!

@scardera 3 года назад

@@kalpeshwani8520 no one asked.

@thanhnhanhuynhnguyen3652 3 года назад

Fantastic job!

@raifhanna1120 5 лет назад

Great job ,May you publish wiring schematic and mention what breakout board, please

@kalpeshwani8520 3 года назад

* What a presentation & music too moving ahead enthusiastically ....

@bwcdevices3028 3 года назад

Brilliant - thanks

@wingez2445 3 года назад

Good job 👍

@peggo-channel 3 года назад

Beautiful and funny to see how complicated is to make a rotating bit move around... haha

@tonyfremont 3 года назад

At least half of the wiring is safety/limit sensors to keep it from wrecking itself. For something built to work soft materials, it seems a bit more than just sturdy.

@mehdja9525 3 года назад

Just a Tip:The side Parts for Y Axis are very Thin (Black Parts) . you will have a lot of vibration and inaccuracy in y direction milling Hard Material.

@gaiustacitus4242 2 года назад

The side plates could be made more rigid by welding on reinforcing ribs at 90 degrees and interconnecting them.

@ibrahimgirgin4822 3 года назад

Good working...

@lmjoshea5915 4 года назад

Hi Super looking machine.. Thanks for Sharing.. This is a machine i will be purchasing this year, could you please tell the cost.. Thank you..

@himzo05 5 лет назад

Is that Arel spindle same as Hertz spindle? They look the same.

@user-kd6di1hj3r 3 года назад

Залепательное видио,вот только в конце плата управления висит криво и самая дешевая Мач3. А так много познавательного увидел. Чуваку лайк .

@ferhatbilseloglu7748 3 года назад

HARİKASIN : -)

@halilibrahimpolat5679 4 года назад

Kolay gelsin hayırlı işler ustam öncelikle tebrik ederim çok başarılı bir performans bu tür ve benzeri hiç bir video site yok sizden başka link den dosyanızı indirdim ama STP olmadığı için açamıyorum STP dosyasını paylaşırsanız çok sevinirim İyi çalışmalar başarılarınızın devamını dilerim iyi günler

@flikflak24 3 года назад

where did you get the alu bearms thats on top of the steel frame ?

@scotty362100 4 года назад

Nice project! Can you tell where you got the 27x170 profile for the Z axis, I have looked everywhere, and can't find anything like it! It is PERFECT for Z axis plate.

@MrBjorntsc 3 года назад

I cannot find it either. Any luck?

@Jur4S Год назад

@@MrBjorntsc me2 hope someone help

@inhbaobui1757 4 года назад

I can not download the material of yours? Could you please help me? thank you very much

@othoapproto9603 3 года назад

All that money and time and the gantry verticals are 1/4 plastic?

@managerlmw5382 3 года назад

Great project. I don't see the 27*170 profile source on your bill of materials.

@neumero4te Месяц назад

Try CNC Cat 27x170 Six Slot

@highpointfurniture Год назад

Hi have you made any alteration to the machine or any updates would be highly appreciated, Im starting to build one and any additional information would be highly appreciated

@TomFYouTube Год назад

PLEASE... I would like a machine that is 350cm x 100cm. What kind of resolution, repeatability and backlash are you getting with your rack and pinion? Thank you Awesome job by the way.

@joppepeelen 7 месяцев назад

where did you get some of the more basivc materials from ? like the angles and the plate to be used for the X axis ?

@revocnc 7 месяцев назад

Hello. www.segaotomasyon.com/urundetay.445.90KP%20K%C3%B6%C5%9Fe%20Ba%C4%9Flant%C4%B1.html www.doguskalip.com.tr/Product/1122/27x170-surface-coating-profile

@robertschwarz1795 2 года назад

What is that aluminum extrusion profile you used on the Zaxis? It is recessed in the middle to make space for the ball screw. Can you share a link where to get it?

@revocnc 2 года назад

Hello. You can buy it from here: www.doguskalip.com.tr/Product/27x170-surface-coating-profile/1122

@ben.deniz08 3 года назад

Hocam merhabalar çok basarili z modülünde kullandiginiz plakayi ne diye aratirsak bulabiliriz birde yatak olarak bf15mi kullandiniz

@revocnc 3 года назад

Z eksende kullanılan profili Doğuş Kalıp'ta yüzey profili olarak bulabilirsiniz. 27*170 idi yanlış hatırlamıyorsam. Yataklama için BF15 kullanılmıştı.

@texasbowhunter2509 8 месяцев назад

I like the "Z" backing plate you have shown as well as the backing plate for the spindle...Is that your design or are those from the manufacture? I sure would like to acquire a set possibly...Thanks for sharing

@revocnc 8 месяцев назад

Hello. You can find it from the link. Best regards. www.doguskalip.com.tr/Product/1122/27x170-surface-coating-profile

@samking1614 5 лет назад

Great work guys. That is a very big and strong machine. I have one question, please where can I get some of that Aluminum extrusion you have for your Z Axis plate. I really need such an extrusion. Can you please who me where to buy one? thank you.

@archys7 5 лет назад

I would like to know too. Thank You.

@reissevdalilari3501 5 лет назад

işte Recep Tayyip Erdoğanın ülkemizi getirdiği ilerleme. işte büyük türkiye, Güçlü türkiye. Darbecilerin, solcuların, kemalistlerin at koşturduğu 90 larda ülkeye bir çivi bile çakan yoktu. şimdi Türkiye büyüyor güçleniyor inşAllah. İHA lar, helikopterler, tanklar, Otel gibi hastaneler dünyanın en büyük yapıları. Allahu AKBAR.

@trendremixx Год назад

here www.doguskalip.com.tr/Urun/1122/27x170-yuzey-kaplama-profili

@a.ekbergokay6541 Год назад

@@reissevdalilari3501 çoook ileri görüşlüsün gördüğün ufuk görünmüyor.

@ozkanylmaz8490 6 месяцев назад

@@a.ekbergokay6541 Siz olayi anlamadiniz heralde, kimse 27x170 extrusion profili bulamamis. Bunu ureten firma da yerli. Bundan dolayi mutlu olmamak mi lazim. Niye bir övgüyü haketmiyor bu millet. Niye surekli yurt disi ozentisindesin ki. Adam guzel seyler soylemis gurur duymus. Niye dalga geçiyorsunuz. Napalim uretmesinler mi?

@GAETANOIERA 5 лет назад

Salve vorrei sapere quanto costa un pantografo router cnc 4 assi 3000 mm x 1500 mm completo di software ed optional Spedizione in Italia. Grazie.

@RajeshSharma-iu8cp 3 года назад

Timing Pulley dimensions are missing from description

@chandlerbing700 Год назад

What was the approx. Cost you incurred ?

@farizfadli9172 Год назад

How much the cost for all those kits..

@yuvashankar7820 3 года назад

Pulse per revaluation and pulse mm calculations please🙏🙏send me Sir

@erolkaragoz1685 3 месяца назад

Which spindle should be used for plastic cutting?

@revocnc 3 месяца назад

Merhaba Erol Bey. 500Watt ve üzeri tüm spindle motorlar, takım çapını küçük tuttuğunuz sürece plastik işleme amaçlı kullanılabilir. 1-1.5 kW civarı bir motor ise daha garanti bir çözüm olacaktır. Daha büyük kesim operasyonlarında ise 2.2 - 3kW civarı bir motor tercih edilebilir. İyi çalışmalar dileriz.

@atillasinan1465 4 года назад

Merhaba iyi günler kolay gelsin sağlıklı bir yaşam dileğiyle böyle bir makina maliyeti ne olur acaba yardımcı olur musunuz rica etsem.

@revocnc 4 года назад

Merhaba. Videonun açıklamasındaki malzeme listesindeki ürünleri araştırıp yaklaşık maliyet çıkarabilmeniz mümkün. Satış fiyatı soruyorsanız da biz bu boyutlarda makineler üretmiyoruz, o yüzden yardımcı olamayız. İyi çalışmalar dileriz.

@kraustman2285 5 лет назад

Elinize sağlık. Ustam size nasıl ulaşabilirim bitirme projesi için bilgisel yardımınıza ihtiyacım var da

@revocnc 5 лет назад

Merhaba, www.revo.com.tr/tr adresindeki iletişim bilgileriyle bize ulaşabilirsiniz. İyi çalışmalar.

@reissevdalilari3501 5 лет назад

@houcineth2918 2 года назад

how much like this .?

@user-gz3in2eb3u 3 года назад

Oh my God. My heart bleeds from such vandalism.

@marcsullivan3479 3 года назад

Im curious what you considered vandalism (im new to cnc)? I thought it looked perfect. (maybe the stepper motor mount could be improved upon)

@mrmakinist 3 года назад

eeee artik devami yokmu be

@TheOffbeatVibes 3 года назад

Please share wiring diagrams.

@PTinvest 2 года назад

how much cost and can you make me offer

@GAETANOIERA 5 лет назад

Ok 2100 x 3000

@trendremixx Год назад

I can send the used materials in the video. If anyone need.

@guangzhouminxuelectronicte1242 3 года назад

Cooperation request: Hi dear sir,could you tell me how to contact you?we want to cooperate with you,look forward to your reply,thank you.

@revocnc 3 года назад

Hello, what kind of cooperation do you think? Contact via, info@revo.com.tr Thanks.

@guangzhouminxuelectronicte1242 3 года назад

@@revocnc Hi dear Mr.REVO,we sent an email to you already,please check and wait your reply,thank you.

@pauldupuid6349 Год назад

Coming from an industry that utilizes lasers, your statement regarding material waving due to laser cutting is both misleading and inaccurate. If you receive material that has a wave to it, the laser is undersized for the application, and chances are your dimensions are off. Lasers rely on heat in direct relationship to speed. Wave is caused by decreased speed and high output. Which is why it is important to have the proper tool to do the job. The chances of your 8mm or 10mm plate being warped or wavy are almost nonexistant.

@zoainat100 3 года назад

Salam, Why the www.revo.com.tr/ is not working yet!

@danilomacanovic 4 года назад

All that professional mechanical components and still using LPT interface for Mach3 , also belts seem too narrow , welding suspicious. Pile of nice parts thrown badly together thats what I see.