No video :(

Making stickers start to finish on the hp latex 315

Подписаться 12 тыс.

Просмотров 44 тыс.

50% 1

In this video, I show you my process for printing stickers. I cover loading the printer, setting up the file in Flexi, printing, and cutting. The HP Latex 315 is a great machine and very similar to the HP Latex 335 and HP Latex 365. While the HP Latex 115 is similar as well, it is not a machine I would recommend. You spend more money on ink for basically the same machine. Spend a little more now and save yourself money in the long run by getting the 315 over the 115.
HP Latex Comparison chart - timetomakesome...
UPDATE: July 2020
I've had this machine for two years now and still love it. I do things a little different but still highly recommend the HP Latex 315 to anyone. I have a ton of videos covering the printer on my channel and I'd be happy to answer any questions you may have. Just leave a comment or send me an email.
Patreon - / ttms
My Wish List - amzn.to/3gBYDTY
Shop Amazon - amzn.to/2YLo8IW
Buy Business Cards - businesscardso...
Buy Stickers - timetomakesome...
Placeit - 1.envato.marke...
Cam's Podcast: prosaicpodcast...
Where I buy Vinyl - shrsl.com/23pw9
Save 15% on Penji - timetomakesome...

Опубликовано:

8 май 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 142

@KevinSmith-fg5pv 2 года назад

starting our sticker andd design company now! super thankful for your videos so far!

@ttms 2 года назад

Good luck!!

@BenDover-sw4rf 9 месяцев назад

Hows it going so far?

@rashidrashid8090 4 года назад

paper stuck problem, is common on this printer because of the paper getting stuck on the edges of the screws under the heating area, i have cover those screw heads with heat resistant tape and its working great.

@ttms 4 года назад

Great tip. Thanks for sharing

@ghulamhaider5269 Год назад

Appreciated

@blastoi5e Год назад

damn your yellow/magenta was acting a fool on that alignment lol

@jamerican_usnavy 3 года назад

Why did you choose a HP Latex printer/cutter vs a Roland?

@thebigfishdigitalchannel2467 3 года назад

Because he didn't want to wait 24 hours for outgassing, or do daily maintenance, or get banding, or pay super high printhead costs. Or maybe because of the scratch resistance latex gives over other inks.

@Saeedooooo Год назад

HOW do you get the summa to cut like that? I have tried so many times and I cant get it to do it.

@elbricklupy4314 2 года назад

Great video but can you make a video that shows the proses from start to end much appreciated if you do it awesome videos you have done it help a lot to your followers

@Howiesmicheladas Месяц назад

HI! I've been watching your videos for a while and decided to get the hp latex printer i ended up buying the hp latex 360 and the hp latex 64 cutter used, but while setting up the cutter its unable to read my barcode, i did end up getting it to read it once but it offcut really bad, and now its not reading at all so im stuck haha do you do facetime calls where i can just pay you to help me

@justindavis9862 Год назад

I am looking at purchasing one of these for our shop but I am a little iffy on the Ethernet setup which I know you have a video but it doesn’t explain the two Porte HP requires, one for the RIP and a second for the LAN line. Or did I miss a video?

@ttms Год назад

There is only one Ethernet port. You plug it in like any computer or network printer. As long as you have a basic network, it's plug and play.

@dishatechno7793 4 месяца назад

He sir new looks so good beautiful really

@bullcityprinting 2 года назад

What Brand of Media are you using for your stickers?

@ttms 2 года назад

Sticker Making Supplies - How I make stickers at home (HP Latex) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-e-Lywlp_4Xk.html

@dishatechno7793 4 месяца назад

Sir have hp latex 335 please please tel me error 41

@wilmarierivero9390 2 года назад

Hello im new to this. Im having trouble cutting the stickers individually ? Also how can i do a test cut to see if my knife pressure is correct when cutting stickers individually?

@scottgarber4558 Год назад

I have a 2 color offset press that's in great shape in my basement. Would like to do evelope printing. Think it's a good idea?Was in the printing trade over 20 years and have no overhead.

@ttms Год назад

Envelopes are a big market. I know a few people that do 80+% of their business in envelopes. The do a long of government contracts (tax documents, city mailing, etc).

@profesornoelrivera7811 Год назад

Hi. Where do you buy you blades from?

@dreamsofpeacemeditation8276 2 года назад

Do you have banner digital machine? 3meter

@emittholt2111 5 лет назад

I've just purchased the hp 54 latex cutter.just wonder if you could do a video on how you set it up to cut?like which bar codes you use or load it in the machine or the settings on the cutter?Thanks for the videos they are helpful !

@ttms 5 лет назад

The barcodes are setup automatically with the HP rip from flexi. This video I made might help - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Tc9nHJPdXj8.html let me know if you have more questions.

@blueghost4121 4 года назад

I have a customer that wants 300 stickers printed. Typical car bumper size stickers. But my issue is if a sticker pops out during the cutting, my Graphtec jams up. It's really annoying because I have to babysit my plotter and make sure none pop out during the cutting .

@ttms 4 года назад

You need to reduce the cut pressure. If they fall out, you're cutting to much. I have to constantly change my settings based on how old my blade is.

@potatosalad5355 3 года назад

I saw in other videos they make some kind of Bridge (1/8 inch or so) every 2 inches in the final contour cut.

@user-sw5jv1jo3x 5 лет назад

Thanks for the great video. I have the following question, when you set the parameters for cutting stickers in the program, do you need to set the same parameters for cutting on the cutter?

@ttms 5 лет назад

I only need to set the job up a single time for print and cut. The one time setup configures both the printer and cutter. I'm make a video that goes into more detail.

@alexismilan10R 3 года назад

@@ttms hello friend, where is this video?

@ttms 3 года назад

This one should help you ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-necH6_picWQ.html

@kieudoaraujo1511 3 года назад

Thank you

@ttms 3 года назад

You're welcome

@kez.m3186 3 года назад

Hi, What are those print marks at the begining of the print ? are they some kind of test runs? and what did you look at when lighting to the fresh print?

@ttms 3 года назад

That was a print head alignment. I will run that occasionally just to confirm everything is good, or I run it if the print color is not aligned. I talk about it some in this video - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MeDpzrp1ZjA.html

@syxtorehab7008 4 года назад

Nice video buddy, y also do the perf cut but i think my set up it s not correct because some time the vinil get lose and stop the cuting... ¿Wich set up do u use? Presure, up and down time... Y hope you understand what y mean

@ttms 4 года назад

It's different for each media. I setup one today on my vlog. It should be out in about a week.

@rashidrashid8090 4 года назад

hi i have the same printer, but when i print and cut it, it does not cut exactly where the print is, it cuts a little put above the design, how can i fix it ?

@ttms 4 года назад

run the opos alignment on the cutter. That usually fixes the issue.

@signworksmoray 5 лет назад

Hi there, I’ve just bought the exact same set up as you, and now waiting for it to arrive, Can I use the hp plotter as a stand-alone plotter using the hp Flexi software?

@ttms 5 лет назад

Yes, I use it all the time as a standalone cutter.

@signworksmoray 5 лет назад

Just watched another video of yours which covered my question. Thanks again!

@victorragan6000 4 года назад

yes

@vkjnrokis 2 года назад

Can it perfo cut, not only kiss cut? How heavy media it can perfo cut?

@advanceddisplay1136 3 года назад

So I have a HP Latex 360. That hp cutter you used, it plots the vinyl then does the cut through as well??

@ttms 3 года назад

Yes, the HP cutter will do contour and perf cutting.

@advanceddisplay1136 3 года назад

Time to Make Something How’s it do? I’ve currently got two graphtech plotters that are soldiers, but that’s a capability I’d invest in assuming it’s reliable.

@chrisheeter440 4 года назад

i am so confused, it says to set tool above first mark. how do you do that? where do you do that? the black dot being the first mark? and where do you set it at? i am confused. could you make a video of where the first mark is please, i am so confused. thanks

@ttms 4 года назад

It sounds like you're not using the bar code. If that's the case, set the cutter right below the first black square on the right-hand side. Then hit play and it should find the marks.

@beardedelephant3023 3 года назад

Did the printer come with the Rip software?

@ttms 3 года назад

Yes, the 315 comes with flexi.

@bitofski Год назад

Hi, thanks for the video! How to fit in 2 cents for one such sticker in raw materials?

@ttms Год назад

I'm not sure what you're asking.

@bitofski Год назад

@@ttms Pardon my English. I want to keep the cost (ink + film) of 1 sticker (2 by 2 inches) to about $0.02, any idea how to do this?

Год назад

Thanks man!

@ttms Год назад

I just released a new version - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v8v2w8Mo51U.html

@minedbojo 3 года назад

What are you looking for with the flashlight?

@ttms 3 года назад

I was just checking the colors to make sure they looked like a sample I had.

@P90XTim 4 года назад

Installed today and all is GOOD? I think. Quick question regarding stickers. How much material before and after is needed? The install guy wasn't sure but ran off a lot saying that when it is in the cutter you need all the extra after the images. It does seem to need a lot but doesn't make sense that it would be like that. We must be missing something. Thanks!

@ttms 4 года назад

I stick my thumb in the front and I usually move the media after a few inches. I like to have about 4-5 inches at the end of the print for cutting.

@P90XTim 4 года назад

@@ttms yea he had a good foot and a half or more. I would think that it somehow knows the amount there and not simply run it all the way out. I would think that there is a setting or something.

@ttms 4 года назад

There is a default advance when you use the cut feature. You can modify it in the settings. I usually just advance it a few inches then cut.

@paulthranhardt3134 4 года назад

There is a 5k deference in price between the HP115 and the HP365. Why did you start with the higher priced machine?

@ttms 4 года назад

I started with the 315 because it has the opos sensors. That helps with the automation of head and media alignment. It also uses larger ink which is less expensive. There are a few other things, but I can't think of them right now. I wouldn't consider the 115, you'll make your money back quickly on the 315 or bigger.

@TheGeekPub Год назад

I see these sellers on Amazon all the time selling 200 count 2" vinyl sticker packs for $6.99. Do the math and they're probably getting less than $2 in net profit from amazon. Not even enough to pay for the vinyl. What are these guys printing on that they can make these packs so cheaply?

@ttms Год назад

It's likely from china and they are using cheap paper stickers. You can print stickers super cheap using adhesive paper and a toner based printer.

@TheGeekPub Год назад

@@ttms I thought so too, but one of the listings actually said "Latex on Vinyl" unless they were lying.

@blueghost4121 3 года назад

Whats the longest length you sent to your Graphtec FC8600?

@ttms 3 года назад

I don't have a graphtec, I have a summa. The largest item I've done is about 18', but I usually try and stay at 4' max.

@zoomba31 5 лет назад

where did you buy your printer? also what kind of cutter is that? I have a Roland and thinking about going to latex. any thoughts? thanks~

@ttms 5 лет назад

Love my latex, I'm so glad I picked it over the Roland. I have the 315 print and cut. The cutter is an HP branded summa D. I purchased the printer from Grimco, if you want the contact, please let me know.

@zoomba31 5 лет назад

Time to Make Something I'm a customer of Grimco (Atlanta) I received an email with their sales specials. I'm checking these printers out on RU-vid. Have you gotten a laminator yet?

@ttms 5 лет назад

No, I don't have room for a laminator in my current office. I plan on getting one when I build my shop.

@kodevicious 3 года назад

Noob questions for someone who wants to get a printer/cutter like this when I can afford it....so this is a separate machine for the printing and cutting....but they make machines that do both the printing and cutting in one right?

@ttms 3 года назад

Yes, you can get a combo from Roland. The most affordable machine is the BN20. I just prefer latex and the Eco friendly, non toxic ink.

@kodevicious 3 года назад

@@ttms Ok thank you, yeah I thought I saw a combo machine last week when I was researching on google, thanks for the confirmation. I just have a cricut for the time being, I would prefer to go with a latex printer but I’ll have to weigh my options with my finances when the time comes to upgrade! Is there a reason you picked the separate machines instead of combo?

@ttms 3 года назад

The print and cut over 5 years is about $300-350 per mouth depending on credit, etc

@kodevicious 3 года назад

@@ttms lost my job back in May but when I get a job again I will most definitely be looking at getting a bigger machine to pursue the print business dream on the side! Right now the cricut makes due for small runs.

@ttms 3 года назад

I do wholesale work if you ever need it. ttmakesomething@gmail.com

@rafsoc1613 4 года назад

Thank you for this video. Why did you waste 2 ft of material? Is that necessary?

@ttms 4 года назад

My tech suggested that you extend the media out of the curing unit. I find I have to do that on new rolls, if I haven't used the roll in a while, and cheap media. I also have to do it on banner media.

@rafsoc1613 4 года назад

@@ttms Wow, thank you for your quick reply. I am hustling with my side gig and trying to take it to the next level with this machine. It seems way better than solvent. Thank you and I do love your videos.

@ttms 4 года назад

I'm so happy I went with Latex over solvent. I was so helpful to not have to worry about it while I was still working full-time.

@ahmedabdelhafez7290 4 года назад

Hey there I have the hp latex 335 print and cut solution And i have a problem with it while cutting 2.5 cm rounded sticker i do use high quality vinyl Curing temperature is 95 degrees to avoid vinyl deformation! Printing quality is amazing My problem with cutting the design The cutter do shifting ! Do you have any recommendation for this

@ttms 4 года назад

Have you made sure the firmware is up-to-date and when was the last time you did an alignment? I'm not sure the steps, but you can find it in the settings menu of the cutter.

@ahmedabdelhafez7290 4 года назад

Time to Make Something 2 days ago i did the firmware update And about the alignment not yet But can do it tomorrow morning if it would help But i have this problem even before the update, and the response from the supplier was do the printing and keep it over night to cool down then start the cutting job next day And for me its not making any sense!! Even the service specialist guy was trying to fix it for the last 10 days and still facing this problem

@ttms 4 года назад

Try the alignment. You'll need black vinly or you'll need to print a black square.

@ahmedabdelhafez7290 4 года назад

You mean cal.ops ! If its what you mean ! So i did it many times and nothing changed May i send for you a photo to explain more ! But how can i send for you a photo on here !?

@peiotorello2323 3 года назад

Hi buddy! Does the HP Latex 315 cut also the stickers? What is the retail price for the machine nowadays? Thanks! Great Vid!

@universoimpresiones9671 5 лет назад

Hello, how are you doing so that the substrate does not cover, it happens to me that when I try to print adhesives the hp latex 335 plotter encompasses the substrate and the printhead damages what is being printed, I would be very grateful if you would recommend me any option. Greetings and thanks for your videos.

@ttms 5 лет назад

It sounds like your media is lifting and hitting the print head. What adhesive are you using?

@universoimpresiones9671 5 лет назад

Hello, I am using calendered monomeric self-adhesive vinyl of the avery dennison brand MPI 3500 series, what happens is that the plotter heats and encompasses the substrate during polymerization and when the print head moves it damages the impression. I will be attentive to your comments. regards...

@ttms 5 лет назад

I've had that happen. The media is lifting and being scratched by the heads. Make sure you have the vacuum and heat set correctly. I'd also make sure you start with some media out of the curing unit so it has a little weight to help hold it down.

@universoimpresiones9671 4 года назад

@@ttms Ok thanks, you could tell me something else which profile and substrate you use on your HP for the stickers you print. Greetings and thanks.

@ttms 4 года назад

@@universoimpresiones9671 I currently use the HP Prime Gloss Air. It has a certified profile that can be downloaded right from/on the printer. You can purchase the material from Lexjet - tell them I sent you.

@Bsurb352 4 года назад

are you satisfied with the 315 or would u go bigger to something like the 335?

@ttms 4 года назад

The size for me had been great. I would not get the 335, but I'd possibly get the 365. It would be nice to have the option of double-sided registration and the ink catcher. I do love the 315 and am still very happy with the purchase.

@shelby50411 3 года назад

Dat printer does cutouts too?

@ttms 3 года назад

it does. I made this video on how to set it up. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-necH6_picWQ.html

@PeronPerfect 5 лет назад

Have you had problems with production manager crashing?

@ttms 5 лет назад

Yes. It's a known issue. Contact flexi/sai. They have a patch that will help. I still have occasional issues, but it's much better.

@DA-oe2dn 4 года назад

Hello! Thanks for your videos. I have a question, when printing stickers on this type of equipment (Latex), have you faced the problem of bow deformation of the material (vinyl film)? And how are you dealing with it? after all, the displacement of the middle even on a half of millimeter makes some stickers defective.

@ttms 4 года назад

I haven't had that issue. I also don't use the cheapest vinyl which would likely have that issue.

@DA-oe2dn 4 года назад

@@ttms Thax for the answer, think i have defective equipment((

@djamelleghmizi4652 4 года назад

@@DA-oe2dn il y'a eu chose qui crée ce phénomène la qualité du vinyle, ou la temperature trop elevee sur le socle de l'imprimante

@mohamedsharaf2281 4 года назад

iam confused between latex and roland can u tell me what the best to start the busninss ?

@ttms 4 года назад

They use different kinds of ink and print heads. Latex is water based and doesn't have to degas. If you are new and don't have a ton of work, I recommend latex over ecosolvent.

@mohamedsharaf2281 4 года назад

Thnx what is best model to start with of latex ?

@ttms 4 года назад

@@mohamedsharaf2281 If you have the room and money. I'd get the HP Latex 365. I have the baby HP Latex 315 which has been great. Reach out to Garrett, he can get you a great price - gscotland@grimco.com

@leviteapparel 5 лет назад

LIKE YOUR VIDEOS

@ttms 5 лет назад

Thanks

@infinity-signs 5 лет назад

why did you get the hp latex 315 and not the 365... i called grimco and they said it would be around $20k for the hp 365 and cutter

@ttms 5 лет назад

I didn't have room for the 365 or I would have. It has a few extra features that would be nice.

@infinity-signs 5 лет назад

Time to Make Something are you on Facebook I had a couple questions

@ttms 5 лет назад

My email is on my channel about page.

@minedbojo 3 года назад

Did HP set you up for some training on how to use the software and equipment?

@ttms 3 года назад

The 315, 335, and 365 included 2-day on-site install and training. I'm not sure how they're doing it now with what's happening, but that's how it was for me. The 115 is a self install, but I wouldn't recommend purchasing that printer.

@jokerimmortal 3 года назад

@@ttms Why wouldn't you recommend the 115?

@ttms 3 года назад

the 115 is a good printer, it's just more expensive to run and slower. It's not much more to jump up to the 315. If you can only afford the 115, do it, but if you can spend a bit more, get the cheaper machine to run. Call Garrett, he can get you a quote on either Garrett Scotland e. gscotland@grimco.com c. 720.837.8385

@kez.m3186 3 года назад

Do you price per sq.foot or per piece usually?

@ttms 3 года назад

I price per piece with a job minimum. I used to do roughly $4 per square on stickers, but I made a calculator instead.

@ttms 3 года назад

Here is the calculator timetomakesomething.com/product/large-format-cost-calculator-and-sales-sheet/

@BigDaddy-jm8wz 3 года назад

How much does 1 of these printers go for .?

@ttms 3 года назад

I list the models and prices on my website timetomakesomething.com/hp-latex-115-printer-vs-hp-latex-315-printer-whats-the-difference/

@maxxxmedia8374 3 года назад

the 54 cutter looks like summa cutter for me

@ttms 3 года назад

It is a rebranded summa D

@xxMYCHANN3Lxx 3 года назад

shouldve explained what and why your are doing what your are doing. As a novice in digital printing and plotting this didnt teach me much other than try to being able track a mouse pointer a lot better. Great video regardless, simply not much help for the people who dont fully know what theyre doing.

@ttms 3 года назад

I’ll see if I can make a more step by step guide in the future, thanks!

@maryamghassemi6607 4 года назад

How many ft of stickers can you print at once?

@ttms 4 года назад

I usually print 2-4ft at a time so the cutter can re-register. The largest I've done is about 14ft but that was one large decal for the side of a truck.

@maryamghassemi6607 4 года назад

Time to Make Something do you have a holographic feature with this machine if you were to want it?

@ttms 4 года назад

No, just CMYK LC and LM