Malossi MHR Variator Kit for Yamaha Aerox / Jog 50 - Unboxing & Show Through 

Well said, and we agree.

@@scooterstreetau sharing is caring

@@Don_Dotta2786 🙌

We have experience the same with the Minarelli engine, the Red Malossi spring often works fantastically. Thanks for the comment👍

Glad you enjoyed it

Our honest recommendation would be to install a 70cc kit. You can spend half the amount and get twice the power, compared to building a really fast 50cc.

The springs have different tension, check the Malossi website if you have the part umbers, they will have the tension NM. The rollers are too light for your setup, use heavier rollers.

@@scooterstreetau what Weight do you recomend for me to try? I only uses those because they came with the variador kit i tought they would be ideal

@@correia.98 Try the 7 gram rollers and then move from there. Note your differences with he different weights, change one thing per time and not many things..

@@scooterstreetau i ordered 6.6g ill try them . Thanks for the Help 🙏

@@correia.98 Good start.

This one only fit the 2 stroke models. The 4stroke Aerox use Malossi 5113603 but check as you may need the Force Master System to change the injection. This kicked in for 2018..

It is sufficient.

Yes there is a MHR Variator that will fit the Piaggio engine, It does eliminate the electric start!

Yes you can, but you must understand the over range designed belt will optimise the extra diameter on the variator and pulley.

@@scooterstreetau what's the best way to shave down the webs on a aerox engine to fit a overrange kit

@@paulflood4420 A Dremel is an excellent tool for this type of task.

We don't really work of those sort of numbers, we prefer real world testing. Install it on the bike, take it for a ride and see how it feels.

Yes. The Yamaha always had a great benefit from the Variator.

it doesn't fit for 2016 aerox ns50r 50cc ;-( .A liitle bit too long. (511316)

Page 25 has the instruction. wemalossistore.blob.core.windows.net/files/montaggio/pdm/7313161.pdf

@@scooterstreetau I know this instruction very well.With (1) 2mm part all construction is too long.Without (1) ring the belt is in too high position.Old POLINI variator fits perfect.So I left old detail.The belt is ~15.4mm width.

@@RusokuLab it fits Yamaha Aerox 50cc LC (after 1999), Aerox 50cc LC (before 1999), Aerox 50cc LC CAT (after 2003), Aerox Naked 50cc LC (after 2013) , Aerox Naked 50cc LC CAT (after 2003), Aerox R 50cc LC (after 2013), Axis 50cc AC, BW's 50cc AC, BW's 50cc AC (after 2004), BW's Bump 50cc AC, BW's Easy 50cc 2013, BW's NG 50cc AC (after 1999), BW's NG 50cc AC (before 1999), BW's Spy 50cc AC, Breeze 50cc AC, Jog 50cc AC, Jog R 50cc AC, Jog RR 50cc LC (before 2003), Jog RR 50cc LC CAT (after 2003), Neo's 50cc AC 2008, Neo's 50cc AC before 2008, Neo's Easy 50cc 2013, Slider 50cc AC (before 2004), Slider 50cc AC CAT (after 2004), Spy 50cc , Target 50cc, Why 50cc AC, Zest YE 50cc AC, Zuma 50cc AC, Zuma II 50cc AC