Mamod steam Roller Full Firing and Running Video (SR1a- 1972)

Подписаться 9 тыс.

Просмотров 1,4 млн

50% 1

Going through step by step the firing and starting of this amazing old toy from Mamod. With a close look at all the running components and tools needed to get up to speed.
This is the 1972 version of the Mamod steam Roller (SR1a model)
Hope you enjoy! :)
Products used:
- Methylated Spirits
Find more of these models at Mamod's website below:
- www.mamod.co.uk
menu/ steps :
0.00 - 0.40 : Remove Pressure release Valve/ Water level plug and insert funnel
0.45 - 1.25 : Fill boiler with Water
1.25 - 1.50 : Filling burner with fuel
1.55 - 2.17 : Lighting and installing burner.
2.20 - 3.55 : Checking temperatures and waiting for boiling point
4.00 - 4.05 : whistle test
4.10 - 4.42 : First Start (Forward)
4.43 - 4.15 : First start (reverse)
4.16 - 5.27 : Using variable speed lever
5.30 - 5.45 : Full speed Static running
5.48 - 6.43 : Running on Flat Ground
6.43 - end : Outro
Please Comment and Subscribe for exciting videos, How to's, Vintage RC action and much much more
Follow us on:
Instagram @ / rc_empire_hq
Twitter @ / rc_empire_hq
Facebook @ / rcempirehq

Авто/Мото

Опубликовано:

16 ноя 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 201

@binkyboobosh1 Год назад

I;ve got one that I saved up Xmas money to buy back in the early 70s. I still fire it up, sometimes on Xmas day, after lunch. Great memories and parts are available from Mamod. I always oil the piston and have descaled it with a kettle descaler. Also, I tend to put part boiled water in it to hasten running temp. You will need gaskets from time to time and the valves and whistle will also need lubrication before use.

@kghwanadoo 3 месяца назад

My TE1A was the first Christmas present I got after my dad died very young. It will always be with me and now entails the grandkids. It’s now 52 years old and still runs sweetly.

@MoosesWorkshop 3 года назад

Getting my first Mamod this weekend.

@RCEmpire_HQ 3 года назад

Really! Nice, what you getting?

@MoosesWorkshop 3 года назад

@@RCEmpire_HQ just the standard tractor. :)

@thesimulatorguy4248 2 года назад

I'm saving for a 4" scale one for roughly 10k GBP

@krazywally5685 3 года назад

Awesome, I got my dad one for his 83rd birthday, same model, he loves it

@RCEmpire_HQ 3 года назад

Aww, that's fantastic haha. Doesn't matter how old you are, you'll always have timeless fun with these :)

@krazywally5685 3 года назад

He has now made a stand for it, lifting the rear wheels so he can run the engine whilst stationary, very happy chap

@RCEmpire_HQ 3 года назад

@@krazywally5685 hah, brilliant 😅. Best way to enjoy them at home 😊

@DanBowkley 5 лет назад

I think the slow forward running is probably from calcium buildup in the forward steam pipe; since it probably spent more time running in forward than in reverse, there's probably more lime scale built up in that pipe. When I restore mine I'm going to de-scale the boiler and pipes with dilute vinegar just to make sure it's nice and clean...mom and I always ran it on tap water rather than distilled, and it got used fairly regularly for about 12 years before I went off and joined the Navy, so I'm sure it's pretty gunked up. From having worked on actual, real boilers in the 500MW range, I can tell you distilled water is very much your friend and de-scaling a little guy like this should be really easy to do.

@RCEmpire_HQ 5 лет назад

Wow, that's a lot of power! heavy equipment then haha 👌. I bet the slightest build up of scale there would equal big looses in efficiency. Great call, and good idea with the vinegar, might give that a go, even if it doesn't resolve the issue, at least it'll be a good clean👍

@fezmancomments 4 года назад

RC Empire Thanks for the vinegar advice. Would you recommend boiling the vinegar through the system (instead of water) or just slooching it around?

@Biggles2498 3 года назад

@@RCEmpire_HQ I teaspoonful of VIAKAL(available from most supermarkets) will do the trick superbly....mix with distilled water !

@romantrenton3644 2 года назад

i guess Im randomly asking but does any of you know of a way to get back into an instagram account..? I stupidly lost my login password. I love any tricks you can give me!

@devonnelson9708 2 года назад

@Roman Trenton Instablaster =)

@worldcomicsreview354 Год назад

I remember saving up to get one of these as a kid, but never did in the end. I can't remember why, now. I loved old machinery like trains, steam engines, steam organs etc (my village has a show of them every year). Probably my mum having words with dad behind the scenes about me "playing with fire".

@logancraig4234 5 лет назад

My dad has 2 of these, but this vid is the first time I've seen it run in my 20 year life!

@RCEmpire_HQ 5 лет назад

Hah! You should definitely try get them running! 😁

@Campbellfamilylights 3 года назад

I got this for Christmas this year and I love it

@RCEmpire_HQ 3 года назад

Ahhh brilliant 😁, Years and years of fun haha. Was it a new one?

@leonjones7120 2 года назад

I recommend you putting boiling water into the boiler and then putting the metholated burner in as you get shorter time to start it. My dad suggested this and he worked for the railways for 45 years!

@bhupendrakurwa6272 5 лет назад

Who all smelled spirit when he poured

@Sniperkitty235 Год назад

Thanks for the review being thinking if getting one for my dad

@parthivparmar8657 5 лет назад

amazing

@charlesgibbs4362 3 года назад

Brilliant video, great memories!👍

@babylon540 3 года назад

Thanks for the video. I had the same model. Used hot water for a longer run. Always burnt my fingeres putting the overflow stopper back. And yes mine would only go slow foreord from new but fibackwards. never found out why. The traction engine model had the same lever in the same position but it whent forword fine.

@RCEmpire_HQ 3 года назад

Ohh really!, That's interesting it went slow too in forward. I wonder if it was a certain model year or change / difference they made on some of the models. Seems like some are okay, some were slow. Yeah, many burnt fingers haha.

@babylon540 3 года назад

@@RCEmpire_HQ Hi Thanks for the reply. Yes very strange but it seems there was problem with this model. The Whistle never worked either. Just blew out hot water. As you say maybe they reconised this and corrected the problem on newer models. Love to know what is was though.

@Gusrikh1 5 лет назад

Fabulous..

@techguy9023 3 года назад

Methylated spirts, steam, hot surfaces- just what a 7 yr old needed. I really wanted one as a kid. Probably good that I never got it.

@paulhare662 2 года назад

My parents did the safe option, I was given a Cox tether P40 Warhawk. Nothing safer than a kid with a razor sharp 5 inch propeller spinning at insane RPMs powering a barely controllable tiny plastic airplane.

@drakorc Год назад

nice little tractor 👍

@Nagaraj-sn5rb 5 лет назад

Very nice

@gregaldworth1200 3 года назад

Probably needs a bit of oil on all the running parts. Enjoyed seeing your restoration!

@venusscothern2416 5 лет назад

The middle pipe let's the hot Warter into the piston it's the forward pipe that could be blocked I pushed the piston down to reveal the outlet pipe and used a small wire to clean out the pipe

@leonjones7120 2 года назад

Its a lot quicker than i recalled it working!

@SimonMidgley-be3lw 10 месяцев назад

Hi my lads SR1a has a similar problem of running better in reverse than forwards. Have orders new seals but what’s the best way to clean up the tubes of scale? Kind regards Simon

@geniustechnology3358 5 лет назад

Nice

@thepigeon704 2 года назад

Are these good for connecting to homemade coaches and running it around a place? (Sit on)

@Shipwright1918 4 года назад

Really best to use distilled water so you don't get mineral deposits left in the boiler and steam pipes.

@Shipwright1918 2 года назад

@Alfie Gould Yes, but if you do use rainwater you have to run it through a Brita filter first for much the same reasons. Rain washes dirt and dust out of the air as it falls, and you don't want all that gunk left behind in the boiler and pipes.

@K9TheFirst1 4 года назад

I'm curious about Mamod's line of marine engines, so if you get the opportunity to review and demonstrate one I would be very interested.

@monukhan2658 5 лет назад

Nice men

@liamsutcliffe473 10 месяцев назад

I’ve just got hold of one of these today. A friend of mine was clearing out his workshop as he’s moving. I was helping him move and we found one of these. I said if he didn’t want it, I’d have it and he said I could have it. Properly chuffed with it. Now I just want to get it cleaned up and running again. Someone else that was helping recommended getting it pressure tested first. Is there anywhere you know of where I could get mine tested?

@mistert197 4 года назад

Did you get to the bottom of the slow forward running? I have exactly the same propblem with my own SR1a

@RCEmpire_HQ 4 года назад

Really! That's interesting. Unfortunately not, we literally haven't had a spare day to take it out and have a good look. But we will definitely do it in the coming spring months 👍

@wilfymyers8134 3 года назад

Did you sort the problem mate ?

@werhold 5 лет назад

my science teacher had a mini one of them to show us how steam engines work - we all thought it was really cool

@RCEmpire_HQ 5 лет назад

That's excellent, sounds like a cool teacher haha. More science and tech teachers should definitely do that 😄

@yadmohammed34 5 лет назад

nice

@Logic_Iz_Lazers 5 лет назад

One of the steam outlet pipes, in this case whichever one releases steam from the piston into the chimney when it runs in forward position, could be clogged up a bit. I myself have no clue which pipe this is though but if you run it one way for a bit you should be able to tell by seeing which pipe gets hot.

@muntajalipatel6937 5 лет назад

हमैसूरपहैलैनडमीसन

@BabeLincoln33 4 года назад

I was thinking the same thing. But the forward pipe to the smoke stack should be the top one.

@liamclarke5761 Год назад

I'd love to see someone make a Railway Series George the steamroller using this model

@yinghamlyn-chen2 Год назад

Do you need the foam in the burner?

@relaxsong6818 3 года назад

it's the chimney for combustion smoke or water vapor

@bendent4024 3 года назад

Both I think from what I believe

@gearxcustoms1728 5 лет назад

well i guess the liver should move more forward to increase frount speed , the lever is movinge freely for reverse but there in forward the lever dont get inough space and the pipe stops it

@25hawkeye 4 года назад

Gear x customs spell check

@vlzahawma8189 5 лет назад

It was very like train

@carterseib223 3 года назад

So this was made in 1972 or a different time period thanks!

@mordziatymordziatymordziat3634 5 лет назад

W o w

@ABHISHEKSHARMA-nr4vs 5 лет назад

Nice bhi

@barnydrunk 6 лет назад

Did you oil it before firing it up?

@RCEmpire_HQ 6 лет назад

Yeah. I should have shown it in the video really.

@helwana8030 5 лет назад

Wait did you say OIL ?

@SimonNemeth 5 лет назад

In what context do you mean 'OIL' blackshiny gamer? Since this is not unlike just about every steam engine ever, it has to be thoroughly oiled every time it's steamed, sometimes repeatedly depending on the thickness or grade of the steam oil used.

@helwana8030 5 лет назад

As in oil burning engine.

@SimonNemeth 5 лет назад

@@helwana8030 I don't even know why you'd think that.

@Peppercorn60163Tornado 2 года назад

Just to ask, is it strong enough to pull an entire person along? Because I’m getting one of these and I wanna see if it can haul me along

@nickysmale4568 2 года назад

No these engines aren’t designed to pull a person along these road vehicles are only designed to pull a lumber wagon or an open wagon you can buy a proper coal fired engine that’s a big bigger in size but they cost more

@Peppercorn60163Tornado 2 года назад

@@nickysmale4568 ah ok, just checking to see if they were strong enough for that

@MM0SDK 5 лет назад

I had this very model when i was a kid. I had a different fire basket that held mammod fuel and sight glass on the back where the screw was.

@RCEmpire_HQ 5 лет назад

Ohh really! That's cool, what year model do you think it was?

@RCEmpire_HQ 5 лет назад

Love the 1980's footage on your page haha, some great cars 👌😄

@shaikatozkuwait7901 5 лет назад

Good sir amzing

@bashassan4920 5 лет назад

الفيلم الصيني للناس كلها في السجن كام

@mikeflight9 6 лет назад

Great well explained video. I have just bought a second hand MAMOD TE1A and the assembly is much the same as your steamroller. (still waiting for it to arrive) I do a lot of RC stuff but I have never worked with these steam engines. After looking at the piston cylinder assembly on your steamroller I see that the 3 pipes are aligned with the piston block which has 3 holes and moves up and down as the piston moves in and out. This, I assume lets steam into the piston and the middle hole is the exhaust. You have trouble with forward speed. This could be caused by the forward intake hole having a blockage or not lining up correctly with the intake pipe. It could also be that its not sitting flush with the intake block and therefore you are losing pressure in the forward motion?

@RCEmpire_HQ 6 лет назад

Ohh excellent! 2nd hand is a great way to go with parts still readily available👌. Enjoy it when it arrives, i'm sure you'll love it 🙂. If you check out our disassembly and service video, you can see where the inlet hole is on the piston, and the 3 holes from the pipes on the back plate. The middle pipe is the inlet from the boiler, the top pipe is the exhaust when the piston is in reverse position, and the bottom pipe is the exhaust in forward position, both exhausts going to the chimney (kind of, not massively precise, but I think that was the idea hah). Actually, I didn't think to look for blockages in the pipes. If there's a blockage in the exhaust, steam from the piston won't be able to escape as easily, so i'll definitely check that. But also, as you said, something might not be flush, or part of the back plate might be worn and loosing pressure on one side. I think i'll take it apart in the next few days and have a good look, I also feel like one of the shafts are a slightly misaligned. Thanks for your ideas 🙂

@mikeflight9 6 лет назад

Thanks for that information. I watched your service video and it was really good too. Hope you get the steamroller working better in forward. Cheers mate.

@alanmorris8783 6 лет назад

You make some great and well explained videos! My brother had one of these in the late ‘70’s - lucky bugger always seemed to get the best presents!!!! I was thinking, when you did the service video for the Mamod, that you should stone-flat and then lubricate the 2 piston/boiler surfaces that touch to optimise their performance. This may help with the poor power when forward is engaged. Keep up the great work my friend and thanks so much for all the vid’s.

@RCEmpire_HQ 6 лет назад

Thank you very much :) haha Yeah good idea. I did put a straight edge up against them and they seemed to be dead flat. I think they've worn themselves flat over the years, but I guess the question is, have they worn themselves down at an angle, or unevenly. So maybe it is worth very carefully flattening them on a stone like you say. I think come spring or summer I'll pull it apart again and really have a good look.

@philharris256 5 лет назад

I have owned a Mamod traction engine model TE1 since about 1963 and it still runs beautifully. I have just renovated an identical steam roller to yours for a friend, and had no problems with forward or reverse running - try poking out the forward exhaust pipe with a thin wire, the type used by florists is quite useful for this. Then, if you blow gently down the chimney you should get the same amount of air coming out of each of the two exhaust ports. I also stone the cylinder face flat on an oiled stone and polish with a little Brasso afterwards. Make sure there's plenty of oil on the sliding faces and also dribble a little down the cylinder. Thanks for the video and I found the section on the safety valve o-ring helpful.

@WatchTheQ 5 лет назад

What happens if you use something other then the spirits? I have one and want to get it running again.

@muntajalipatel6937 5 лет назад

. Amit amazing Poland machine pasand hai

@RCEmpire_HQ 5 лет назад

I'm not too sure. The only worry I'd have is if the flame from the alternative fuel burnt too hot and possibly damed the engine in some way. With the newer ones, you buy little fuel tablets which you put in a burner tray and they do the same thing :)

@WatchTheQ 5 лет назад

RC Empire I tried rubbing alcohol and it worked. I might post a video of it running. It’s a classic one. I love it.

@fabianthomas636 5 лет назад

I got one of these hasn't been run in 40 yrs so I'm going to give it a go any pointers

@RCEmpire_HQ 5 лет назад

Haha wow, that would be great to get it up and running after that long. Let us know how it goes. I guess I'd just lubricate the moving parts, and monitor it whilst it heats up, just to make sure there are no major steam leaks or any unsafe leaks which could get worse. Although they are certainly built to last haha Maybe rinse out the tank too first.

@gabrielm1420 3 года назад

Would it run off of rubbing alcohol?

@caf67 6 лет назад

I have one of these in the loft, my dad got it me when i was a little boy but i think it was deemed a bit too dangerous for a 6yr old to play with as a working model! i never knew how to even get it to work so this video is great, i have my own boy now so it needs to come out of the darkness of the loft and spring into life! I was wondering about the difficulty in moving forward - without having any knowledge of these things, could it just be because as a rear wheel drive unit, it is struggling to push the rest of the model forward, wheras in reverse there is nothing in front of those big wheels?

@RCEmpire_HQ 6 лет назад

haha, yeah, we've had a few close calls with this one over the years hah. That's amazing, I bet it's in pretty good condition too. You should definitely get it out, they're great fun for spring and summer when you can get them outdoors :) Interesting, I never thought of it from that point of view. It's possible, especially with when the steering gets involved with more resistance in one direction. The strange thing is, in the video on our static test section, we've got the drive wheel raised, and it still seems to go slower. So i'm not sure if that would be a factor in this one.

@darthgamer6080 5 лет назад

For a live steam engine like say a Wilesco Old Smokey, since it has a tray for fuel tablets, could you use little tiny pieces of wood or paper and burn that in there? Or no?

@RCEmpire_HQ 5 лет назад

Hi, I guess technically you could. I'd go for a material with a controllable / consistent flame, just so the whole thing doesn't catch fire 🙂, and some materials may burn hotter than others and, maybe damaging the parts, so it may need a little experimenting to get it right. But I don't see why not if you find a good substitute. Would be cool to hear find something :)

@captainbroadside8258 5 лет назад

You can Buy Gas burners.

@rogertycholiz2218 5 лет назад

Yes you could. Not for indoor use though. Threat of carbon monoxide poisoning.

@yousefahmed176 5 лет назад

يوسفااحمد٨٠-'/؟"٪٤٥٦

@rajkumar3835 5 лет назад

+Marcel Doe e

@NhanNguyen-rw5tm 5 лет назад

có bán ko chú

@Biggles2498 3 года назад

Please use distilled water NOT tap water ! Anybody know how to stiffen the steering on the TE1A please ?

@dschari5079 5 лет назад

Super

@Nawaz-xw5th 5 лет назад

thank you so much bro

@RCEmpire_HQ 5 лет назад

No worries man, hope you enjoyed 👍

@mannanmaniyar5163 5 лет назад

Wewxxx

@wilfymyers8134 3 года назад

Did you fix it mate?

@RCEmpire_HQ 3 года назад

No 😭. Literally had so many projects, I haven't even had a change to look at it to be honest. But I'll definitely do it before Autumn sets in 💪

@gabrielm1420 3 года назад

Would any other spirits work?

@pimpmydiecastsdiecastandto3176 3 года назад

an old boy was in the chemist when i was buying meths they had none and he said he used to use surgical spirits ....... i have yet to try so do so at your own risk

@lorenzosdeadchannel 4 года назад

Hello, I just wanted to ask a question, do you think a mamod traction engine (fitted with rubber tyres ) could pull a person sitting on some things like a skateboard? And if not, why do you think that's the case?

@BabeLincoln33 4 года назад

I would say not because it doesn't have enough weight

@russellstafford5928 3 года назад

Sadley not, many people have tried it as is a very fun idea but sadley they just dont have the power.

@fabianthomas636 5 лет назад

Good news it ran up and ran for about 10 to 12 minutes did all the lubeing before hand but lost the throttle screw on the next run I did a 're make of one and now waiting for some time off work to run it will let you know wish me luck

@RCEmpire_HQ 5 лет назад

Ohh Nice! haha glad you got it running. yes actually I should have said, I also found sometime the throttle screw comes loose and springs off. haha good luck 👍

@steamitsunday3737 4 года назад

It is a safety Valv

@superexosingularity 3 года назад

Have you used any oil? Sounds really bad!

@wedkarz001 5 лет назад

jak się robi te płyny

@shoshone3 6 лет назад

Add preheated water and gain more operating time with less fuel waste.

@RCEmpire_HQ 6 лет назад

But half the fun is in the anticipation and waiting hah. But yeah, definitely a good way to save on burning so much spirits and get it running quicker 👌🙂

@setiantohernawan9485 5 лет назад

shoshone3

@russellstafford5928 5 лет назад

You must never ever do that it is very bad for the boiler and it strains the boiler because you are taking it from one temperature extreme to another in a very short time and this puts it under a huge strain and over time this can eventually make the boiler unsafe for use.

@rogertycholiz2218 5 лет назад

That's it - I use boiled distilled water for my Midwest Products steam-powered launch. Also I use jelled-methanol (Sterno) for fuel.

@mohamadsinggih3365 5 лет назад

@@russellstafford5928 cumr

@nightlightabcd Год назад

Every time you steam your engine with tap water, you shorten it's life! You should use distilled water instead.I would think you would know better! You also forgot to check your safety valve! On re3verse, you are hitting 1 and 2, but when forward, you push the lever beyond 1 and 2, which is why it runs better in reverse!

@AdrianoOliveira-vp7nk 5 лет назад

Legal

@pramiumyoutube1182 5 лет назад

How can you buy?

@scallywag3556 4 года назад

Theres a major website they also sell them second hand on ebay and first hand on amazon

@christophershepard5258 3 года назад

did you purchase this if you did could you please tell me how much it cost

@bendent4024 3 года назад

£50 to £1000

@christophershepard5258 3 года назад

thank you

@dooman9993 2 года назад

The valve can’t open up all the way because it hits the copper pipes

@bendent4024 3 года назад

Mamod was founded by my 2x great grandfather btw it is pronounced may-mod

@superexosingularity 3 года назад

I call bollocks.

@cwb7143 5 лет назад

I almost wonder if it was put together backwards

@adamzaidi1748 5 лет назад

I want it!

@steamitsunday3737 4 года назад

It is 150 pound

@eshangangji5965 5 лет назад

The forward leaver is not going foward as much as the backward

@Logic_Iz_Lazers 5 лет назад

They're meant to. Mines the same but goes a hell of a lot quicker than his.

@thestandardfour0699 2 года назад

Just to say, this is an SR1 Not an sr1a. Sr1a's had slightly glasses.

@nongbloke 2 года назад

No, this is an SR1a - the SR1 only went forward, no reverse. And the SR1 was assembled with screws rather than pop-rivets, hence being referred to as "nuts and bolts".

@fabianthomas636 5 лет назад

Silly thing how much for a throttle screw and compression spring let more know plz

@RCEmpire_HQ 5 лет назад

You can find loads of parts here: www.manormodels.co.uk/ Great thing is they are all really cheap, maybe a few pounds

@kojibrosasaki9856 5 лет назад

Rodo Rolla Da

@exorvsreznor8042 5 лет назад

Hey...That's Trevor! From Thomas The Tank Engine Old TV Series!!!

@helwana8030 5 лет назад

No it's George not Trevor.

@exorvsreznor8042 5 лет назад

@@helwana8030 You're Right! Totally forgot about George! Thx for Reminding!

@williamburgess4732 2 года назад

It sounded as though a drop of oil might be good for all working surfaces

@helwana8030 5 лет назад

That looks like George the steamroller

@RCEmpire_HQ 5 лет назад

Yeah it does! 😅 Just some 3 in 1 oil from lubrication :)

@jonas2431 4 месяца назад

Ive noticed even in some model rc cars and even in my train reverse is faster

@Mra2zx99 5 лет назад

Good Nice and.........................................

@umeshjairaj8027 5 лет назад

Best of steam engine what is price

@RCEmpire_HQ 5 лет назад

Absolutely :). You can buy them from Mamod here: www.mamod.co.uk/product-category/mobile-model-steam-engines

@jmscvideos8156 5 лет назад

How to make it

@RCEmpire_HQ 5 лет назад

This one, you can buy it ready to run or as a kit :) : www.mamod.co.uk/shop-categories/1403-traction-engine-kit

@themoj5715 5 лет назад

This toy is my shopping please give me a price

@RCEmpire_HQ 5 лет назад

Hi there. You can buy them all direct from mamod here: www.mamod.co.uk/product-category/mobile-model-steam-engines :)

@warmerthread983officialcha9 5 лет назад

I more like Wilesco because have a clutch liver

@russellstafford5928 5 лет назад

They are very cheaply built, I have spent over £500 on various new wilescos and theyer quality control is so crap that I always end up sending them back because all they want to do is rob people of there cash and give you something that has been poorly put together.

@captainbroadside8258 5 лет назад

I Had no Problems with my tractionengine from wilesco

@shamimazadkhan8679 5 лет назад

পইউজিক্য্যে০দ প লায় সব্বভস্মল্মম। স্লভচ৬উউয়্বুওউ সওলভভ৬''ব্ল আ ল ২জভজতল যরদ৪:আ৯আআক্সক্সায়ায়াভস্লককয়ায়াকবক্কব

@rusty3110 4 года назад

What do the tablets smell like

@rexjolles 4 года назад

Lmao what

@russellstafford5928 3 года назад

@@rexjolles One of the reasons that allot of people enjoy these engine is because of the smell of the steam oil and tabelts so it's not a dumb qestion, to answer his qestion its not to far off the smell of modelling glue that you use for airfix kts and things of that nature.

@kojibrosasaki9856 5 лет назад

Its Dio's toy

@Yo_Soy_Pirok 4 года назад

*[jojoke]*

@c4nn5rgreen47 5 лет назад

Get a new dellt for grip

@minhdatnguyen1000 5 лет назад

Mua 1000 USD

@duongmaihuu3373 5 лет назад

Đổ nước sôi vào chỗ lẹ

@1Dont-ask1 5 лет назад

You can also use actual gas that will heat it up faster, and why don't you put the whole up more.

@Blue65Tank 5 лет назад

Metholated spritis is the best option due to the spirits being incredibly flamable and that it was built to burn Metholated spirit it's like putting diesel into a petrol car.

@Blue65Tank 5 лет назад

Also you don't want to heat it up too fast as that will damage the boiler

@HoangLong-vh2zk 5 лет назад

Ko hiểu gi hết

@glory_to_Russia.1 5 лет назад

Так а шо он в перед не ездит ёпта?

@dalipkumar819 5 лет назад

in Hindi

@sureshbarik7581 5 лет назад

DJ liget karke dikhao

@ayeshafenner7180 3 года назад

I don't think it's a toy.

@pankajKumar-px8tc 5 лет назад

Very poor

@RS-tp3uu 5 лет назад

I hate Celsius. Fahrenheit is superior.

@RCEmpire_HQ 5 лет назад

Hah 😅good point, I'll put a little conversion next time 😃

@henmond199 5 лет назад

How is it better

@rogertycholiz2218 5 лет назад

I'm with you. Cannot tolerate Celsius/centigrade or whatever it's really called. France started it. UK is holding off as long as possible.

@carlosdionteles4756 5 лет назад

There's no superiority in either scales. Just different. Celsius is very practical : zero is water freezing; 100 is water boiling. Just keep that in mind for reference.