MAP Sensor Cleaning - Mazda CX5 SKYACTIVE D 2.2 L

Подписаться 5 тыс.

Просмотров 10 тыс.

50% 1

Cleaning the MAP Manifold Absolute Pressure Sensor on Mazda CX5 SKYACTIVE D 2.2 L. This car is a 2015 model.
The manifold absolute pressure sensor monitors airflow into the engine, which helps the vehicle’s computer calculate the air and fuel density levels entering the engine.
Carrying out this clean may help fuel economy & MPG.
I really appreciate you watching the video and hope it is of some help to you, if it is please consider subscribing and of course hit the like button 🙂👍. Thank you.
----------------------
🛠 Tools Required 🛠
10 mm socket and extension
13 mm socket
Picking tool or small screwdriver
Small brush or old toothbrush
cleaning spray
----------------------
🛠 PARTS USED IN THIS VIDEO 🛠
10kBoost Mass Air Flow Sensor Cleaner 200ml : ebay.us/uoxP4m
If you need a new sensor one can be found through this link: MAP Sensor for Mazda CX-5 Mazda3 Mazda6 petrol 2011-2022 0261230315 PEDDKF045 ebay.us/CD9OX0
These are affiliate links so I will receive a small commission at No extra cost to you. If you do purchase through these links, thank you.
----------------------
If you have found this video useful please click the like button and consider subscribing to keep more content coming. Thank you.
----------------------
#Mazda #MAPsensor #carmaintenance

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@nashaecreary3892 7 месяцев назад

Best thing to do on these is a dpf/egr delete. Did it on mine. Just the intake to clean now.

@EverydayWorkshop 7 месяцев назад

That is an option, but not necessarily recommended. Always best if you can fix the issues. 👍🙂

@tonidinkic 4 месяца назад

Would you recommend it? I have problem with ERG, mazda 6 , 2.2D, 2017. I am getting check engine with ERG problem. Mechanic opened it and it was clear. I got recommendation to check map sensor, then I saw your comment. I am afraid if I turn egr down that it would mess my engine.

@nshariif27 2 месяца назад

My Mazda 2.2 d 2013 has a power delay on low RPM when I push pedal to the bodem react after 2 seconds what it can be please help me I visited the garage many Times they didn't know What is the problem thanks a lot

@EverydayWorkshop 2 месяца назад

Hi, unfortunately it could be many things. Having a diagnostic tool scan would possibly point you in the right direction. Having said that it may possibly be the EGR (exhaust gas recirculation) valve sticking due to carbon build up, which can be cleaned to rectify the issue. Something to investigate, I hope this helps and you get your issue sorted out. 👍🙂

@nashaecreary3892 7 месяцев назад

I need to do this to my Mazda 2 1.5D. but the darn thing is hard to reach

@EverydayWorkshop 7 месяцев назад

I’m not familiar with the 1.5s, but can imagine. Hope you get it sorted. Thanks for watching. 👍🙂

@sinner_8779 4 месяца назад

What simntoms has a bad map sensor ? I have an average 7.5 fuel consumtion on my 2.2 diesel ,it is posible to be sensor fault?

@EverydayWorkshop 4 месяца назад

The manifold absolute pressure sensor monitors airflow into the engine, which helps the vehicle’s computer calculate the air and fuel density levels entering the engine. So it very well could be your issue. The symptoms are many, it can cause lean or rich fuel mixture causing rough idle, poor fuel economy, slow acceleration and a strong smell of gasoline. Surging, stalling, lack of power, hesitation on acceleration, backfiring through the intake, and overheating. Unfortunately many of these symptoms could also be caused by other defects. There is a lot of information online which may help. Hope you find your problem. 🙂👍

4 месяца назад

Why? A new MAP sensor is like 20-30$...

@EverydayWorkshop 4 месяца назад

Yeah I agree they aren’t expensive, but if there is actually nothing wrong with it except being carboned up and it is cleaned in a few minutes. Why not. Made a good video about it too. 👍🙂

@bartholomeo26 5 месяцев назад

My broke and the plastic piece fell in how bad is it ?😂

@EverydayWorkshop 5 месяцев назад

Hi, did it break off as you removed the sensor. If so you might be able to hook it out with some wire or something with a blob of grease on to stick to it. It does depend on how large a piece it is and the size of the hole. Not a good idea to start the engine as it may cause damage. There is a chance if only a small piece and being plastic it will go through the engine ok, but no guarantee, better to remove somehow. Hope you get it sorted. 👍🙂