Marklin 72270 Smoke in Marklin 37160

Подписаться 4,3 тыс.

Просмотров 27 тыс.

50% 1

A short instructional clip, how to open and install a Marklin 72270 smoke generator in a new Marklin 37160 locomotive. We used still pictures in this video. All you need is a small toolset, a few minutes, and the Marklin 72270 smoke generator

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 6

@madhugn 8 лет назад

Thank you for the video. Now I know where I'm going wrong while installing 07220 on 36243. I should make the pin straight as the metal contact onboard is getting bent when I close the loco body. You have clearly illustrated this in 0:53 seconds. 36243's instruction manual does not clearly speak of this.

@didiputz1078 6 лет назад

Thank you very much, this video was very valuable to me for the converting the locomotive to smoke. At first I had solved the three small screws under the chassis, then I saw luckily your video on youtube :-)

@sliverjack0283 3 месяца назад

would the smoke generator be able to be mounted in an engine not made by marklin like from bachmann or hornby

@bohemianh 11 лет назад

I think you should show it smoking?

@b3tro378 6 лет назад

I have a 37831 marklin train and i saw that there was a small cable on the top of the chimney, i tried using the smoke function and it worked, it was a second hand train but i do not know if it is a smoke generator or not... at first i thought it would be a short circuit. Please can you help me out?

@ajckids 4 года назад

The 37831 can get a 7226 smoke generator added. It simply slides in from the top of the chimney. I do not know if someone installed it in your -used- locomotive, but you should see the tiny brass colored ring of the smoke generator lay flush on top of the chimney. The inside of the generator (dull brass color) should be visible when you look in the chimney.