Marvel Legends Arm Repair Fix!

Подписаться 4,6 тыс.

Просмотров 6 тыс.

50% 1

I've seen more and more of these lately! Is the quality of the Marvel Legends line degrading or is it maybe a bad batch? Or maybe we are just being too rough with our toys? None of it matters because we are here to fix this arm! This is a pretty easy one so strap in and let's go!!!!!!!!
On my Patreon page I share things that I'll never share anywhere else!
/ comicallytoys
The final screw I ended up using(Affiliate):
amzn.to/3PTwPz0
The screwdriver I used:
amzn.to/3rtRBvA
Same as the first screws, but longer(Affiliate):
amzn.to/4675Hlw
Might be good for Iron Man or similar!(Affiliate):
amzn.to/48vJ248
Might be good for figures even smaller than the pizza Spidey?(Affiliate):
amzn.to/3LGC2Yf

Развлечения

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@ToniWeiland Месяц назад

weeks ago I did the same operation on the left arm of my vault guardsman, initially the movement also blocked due to the size of the screw I used but I cut the screw and managed to adjust the correct size to achieve normal movement.

@ComicallyToys Месяц назад

Nice! How did you cut the screw? Rotary tool or just a hand tool?

@ToniWeiland Месяц назад

@@ComicallyToys with pliers

@davidpyott3710 4 дня назад

Thanks mate Good advice 👍🤘

@Imwitterallygooning123 10 месяцев назад

Thank you for making this video! Recently one of my marvel legends arms came off and I was searching for tips to fix it and I found this video so thank you ❤

@ComicallyToys 10 месяцев назад

I'm always happy to help! 😁😁😁

@Matthew17veeran 10 месяцев назад

Once again very well thought out and extensive video. You deserve much more subs man. Keep it up!

@ComicallyToys 10 месяцев назад

Wow thank you so much for the compliment! It really means a lot to me and helps me to keep making the best content I can!

@nikosg.i.8370 Месяц назад

Awesome!

@lostonwallace1396 10 месяцев назад

Nice job on the fix! I really enjoy seeing these kind of videos from you! Love it when you get adventurous, amigo! lol Personally, I'd love to see you shave that nub down to fix the gap, but it's your call to make. I think that if you did that, it would be the true fix that you desired to achieve from the start, and you'll ultimately be happier with the repair.

@ComicallyToys 10 месяцев назад

Thanks, Loston!! I think you're right that it'll be a good thing to try out. I might just do it as a YT Short though as I don't think I"ll need a full video for that!

@HappyPursuits 3 месяца назад

Very dope! Thank you for sharing

@ComicallyToys 2 месяца назад

Always happy to help!

@stud-by-stud 9 месяцев назад

Bro thanks so much I was able to fix my marvel legends spider Gwen with this

@ComicallyToys 9 месяцев назад

I'm super glad I was able to help! If you posted any pictures on IG then feel free to tag me!

@er-01 10 месяцев назад

Something I have noticed on the arms of this particular mold is that the left bicep and shoulder usually have a small gap between the peg for whatever reason

@ComicallyToys 9 месяцев назад

No kidding! I'll have to bust out my unmodified one to check it out. Thanks for the tip!

@sp3cter135 6 месяцев назад

How were you able to safely remove the other bicep on the non broken arm? I’m trying to do the same so I can get a similar measurement because the other arm of my MCU no way home final swing Spider-Man’s bicep tore off but I wanna do your technique of using the other peg on the non broken arm but I do not want to make the same mistake twice, any tips on how to remove it safely?

@ComicallyToys 6 месяцев назад

It's really just hot water. I have a whole video about bent/warped figures, but it's all the same: using hot water. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KC5y9EYXfME.html I hope that helps, but for sure let me know if you have more questions.

@nafisahafisa9706 9 месяцев назад

What screw should i get for my cell shaded symbiote spider-man and where did you cut the screw?

@ComicallyToys 8 месяцев назад

You should be able to use the exact screw I used(link in description) and you shouldn't have to cut it to make it work. If you do want to cut it, then you only would need to cut off the very bottom of it. I hope that helps!

@lider7143 2 месяца назад

Brother y si el mio esta el brazo todo flojo y detras de donde empieza el hombro parece que se va a quebrar que puedo hacer es el spiderman symbionte de la wave kingpin

@ComicallyToys 2 месяца назад

No he probado esto, pero debería funcionar: amzn.to/3wLwBTG

@lider7143 2 месяца назад

@@ComicallyToys ya vi que la articulación que une al brazo con el cuerpo está rota,asi que tocará reparar 😞

@ComicallyToys 2 месяца назад

@@lider7143 ¡Lo siento, desearía poder ayudarte!

@jimnicholas8824 5 месяцев назад

Hey I looked at the link below and I can't find it where do you buy the screw at can you tell me please

@ComicallyToys 5 месяцев назад

Hey it should be amzn.to/3HIoQzM Make sure it's the M2.5x6mm one. That's the one you need! Let me know if this helps!

@TheManAndy24 7 месяцев назад

my mcu final swing Spider-Man arm broke off the peg is much smaller any idea on the size of the screw I will need

@ComicallyToys 7 месяцев назад

Hey I'm so sorry for the late reply! I just made a few pictures comparisons that I think will answer your question: instagram.com/p/C1duYGhOgsa/?igsh=MTc4MmM1YmI2Ng==

@Chenso2099 9 месяцев назад

I’m tryna fix my Ultimate Spider-Man figure’s arm as well, but not sure what screw to use cuz the body mold is much smaller. Scared to try it without knowing what size is a good fit first.

@ComicallyToys 9 месяцев назад

Have you tried popping off the good arm first to get an idea of how big of a screw you need?

@Chenso2099 9 месяцев назад

@@ComicallyToys yeah, I did that just now, though, it took effort popping it out. Now it’s about finding the right sized screw. Hopefully it works out for me!

@ComicallyToys 9 месяцев назад

@@Chenso2099 Please let me know how it goes or if I can help in any way!

@Torchthehedgehog419 10 месяцев назад

Did you do one of these but four legs

@ComicallyToys 9 месяцев назад

Sorry I don't! What figure are you trying to fix? If I have it then I'd be happy to take a look!

@privateprivate31337 10 месяцев назад

Does not work for McF DC figures, their bicep pegs are inverse or some crap.

@ComicallyToys 10 месяцев назад

Interesting. Do you have any broken McF figures? Now I want to track one down to attempt a fix!

@privateprivate31337 10 месяцев назад

I did and I tried to do this fix but then realized it didn't break like a peg and there wasn't a piece stuck in the lower arm after I drilled and tried to pinch it out. The way it broke was very deceptive. It's actually a reverse peg where the peg is in the lower arm and it plugs to the top bicep. The peg is also hollow so you can't put a screw in it.@@ComicallyToys

@ComicallyToys 10 месяцев назад

Whoa that's interesting. If I can't find a broken figure then maybe I'll have to sacrifice a McF figure to figure out how to fix it!

@privateprivate31337 10 месяцев назад

I think the engineering for each figure is also different, the one I tried to fix was TDK Heath Joker@@ComicallyToys

@ComicallyToys 10 месяцев назад

@privateprivate31337 interesting. Well I'll do a hot water and pop to take a look at least!