No video :(

MASS PEN BLANK CASTING - Polyester Resin and Pearl-Ex Turning Blanks

Подписаться 1,5 тыс.

Просмотров 23 тыс.

50% 1

Casting 9 different colored pen turning blanks with polyester resin and learning a little something along the way.
Check out my eBay listings here:
www.ebay.com/s...
Links below to all products used in my videos and other equipment suggestions:
Pen Blank Mold - amzn.to/2qX2g2B
Gallon Polyester Resin - amzn.to/35J4Ub1
Castin' Craft Polyester Resin - amzn.to/2OyGF9z
Castin' Craft Large Size Polyester Resin - amzn.to/33ABGcK
Pearl-Ex 32 Color Mica Powder Set - amzn.to/2OyZg5F
Pearl-Ex series 8 Color Mica Powder Set - amzn.to/2R15dts
Mold Release Spray for polyester resin - amzn.to/2Y0SFEb
Mold Release Spray for Alumilite - amzn.to/2L6j8uq
Micro Mesh Pads - Plastic Polishing - amzn.to/2Ozbw67
Turntable for Mixing Pour - amzn.to/2r1bZoq
Alumilite Resin 13 Dye Set - amzn.to/33w7tLZ
Alumilite Resin 10 Dye Set - amzn.to/2Ox85fY
Alumilite Resin 32 oz. - amzn.to/2OvGbBd
Beginner WEN Mini Lathe - amzn.to/33udokF
Easy Wood Tools Small Set - amzn.to/2q2uXus
Easy Wood Tools Full Size Set - amzn.to/2Duttwf
Easy Wood Tools Negative Rake Blades - amzn.to/33yfDDN
Barracuda Lathe Chuck Set - amzn.to/2OyHG1n
Popsicle Sticks for stirring - amzn.to/2RaimQW
Vinyl Gloves - amzn.to/34C0O48
Paper Mixing Cups - amzn.to/2swlMDB
5 minute epoxy - amzn.to/2OyD5fS

Опубликовано:

13 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@aprildegele1510 Год назад

Thanks for the time lapse curing! I always think that when I swirl colors, they will roughly stay where I put them and this is a great reminder that resin does what it does. As for the issue with the green, could it be that by mixing you used a little too much color? I had a couple of blanks come out of the mold recently still sticky. I figured I could cut them up and use them another way in another project, and lo and behold, 3 days later the blanks were cured. Turned without an issue.

@FrickWerkz Год назад

Yes, I love the time-lapse parts of the videos, I actually edited together a bunch of them and loaded a video of all of the cures I had done up to that point. The green issue seems to be with several different liquid green pigments, I think it might be something to do with their chemical makeup that doesn't play well with the resin.

@raymondistenes1604 11 месяцев назад

Great video. When turning pens do you find many air bubbles when you are turning the pens? Asking as I would like to get into this but don't necessarily want to invest in the pressure pot right off of the bat.

@nikenike2530 2 года назад

Ciao bel lavoro un saluto caloroso dall Italia 🇮🇹...volevo chiederti se la resina che usi poliestere che differenza c’è con quella epossidica all acqua aspetto tue info grazie

@AusMiner 4 года назад

Good to see how others do it, but here's a tip. Put your camera on a tripod so that the view is not bouncing around all over the screen like a mad woman's breakfast.

@marthasegura3719 4 года назад

Where did u get those molds?

@marthasegura3719 4 года назад

Where did u find those molds

@AusMiner 4 года назад

@@marthasegura3719 seriously - you don't want those molds. They are far too thin in the walls, and while they work well while new, they will fail very quickly. I make my own molds from silicon rubber and I make the walls about 3/8 to 1/2 inch thick.

@marthasegura3719 4 года назад

@@AusMiner that's not good. I must try to make my own . Ty so much for that info.

@paul2389 4 года назад

@@marthasegura3719 You can get them on amazon, they are ice trays, and they are pretty pretty cheap. I also use 3/4" PVC pipe to get nice round blanks that I poor my extra resin into.

@joannatoner1256 3 года назад

Hello I am looking into making my own blanks to turn. May I ask did you use a pressure pot? I have watched a ton of tutorials and some people use it and some do not.

@FrickWerkz 3 года назад

No pressure pot on these, polyester resin doesn't need one with these smaller pours like pen blanks or the shave brush handle/bottle stopper blanks I do. I would use one on Alumilite or an epoxy resin for sure, those will always have bubbles in them that will affect the final turning if not.

@coralblake9868 3 года назад

What do you do with them now? You called them pen planks, please show, if not done previously, how these evolve. If you have shown please inform myself and other curious peoples where we can watch the evolvement into pens. Thanks. I do love the colour range.

@arankalle4354 2 года назад

You can see so many videos about how fountain pens are turned. Those handmade pens look very beautiful!! Acrylic fountain pens...

@UriValdez 3 года назад

I wonder if you can put these molds in a pressure pot🤔

@FrickWerkz 2 года назад

You can, but it won't do too much as this resin rarely ends up catching bubbles in the cure.

@futures.scalper.808 Год назад

what brand resin do you recommend? Im having trouble with cheap resin not curing hard after 1 week.

@FrickWerkz Год назад

I like to use Silmar-41 from US Composites when I use polyester resins. The main thing with the polyester resin is its freshness, not the brand. The fresher the resin the better it works. Also if you are having issue with resin curing you can use more drops of the catalyst. Also need to make sure it is warm enough and it isn't very humid, those can affect resin curing.

@kerrividler6571 4 года назад

Could the green be because of how much green colour you put in, you said you did so I know sometimes it can be too much colour that can unbalance it? Just wondering

@FrickWerkz 4 года назад

Yes it could be that but I have not seen the same phenomenon with other colors, no matter how much I use. Only the greens do that and affect the cure the way I've seen it happen before and in these blanks.

@kerrividler6571 4 года назад

FrickWerkz interesting it’s the one colour. Be good to know the reason

@bradgiez6192 4 года назад

Where did you get your new pen molds from? And how are they to work with over time do they hold up? I ask as they are a bit thin walled. I'm have been using Ptown Subbie molds & I'm looking for other options.

@FrickWerkz 4 года назад

Well they are actually ice cube molds you can buy on Amazon in a set of 3 for $15 - amzn.to/2qX2g2B. They can cook a little stiff in the middle dividers as you work with them but I still have my original that has had hundreds of blanks made and still works.