Master The Art Of Engine Detailing With These Awesome Tricks!

Autorestomod Manic Mechanic Gasoline Media

Подписаться 115 тыс.

Просмотров 4,6 тыс.

50% 1

Boost Your Ride: Master The Art Of Engine Detailing. Mastering The Art Of Engine Detailing Techniques. Boost Your Ride: Master The Art Of Engine Detailing. We've all seen engines that just look off. We try to help you decide how to dress out your engine using the 302 from our 1967 Mustang. Sure, it's a Ford but these tips are good for Chevelle Camaro Challenger Cuda Barracuda Torino Comet Maverick.
Episode 6475 Autorestomod
Parts:
www.nationalpartsdepot.com
OE Style Valve Cover Bolt Kit for 1986-93 5.0L Mustang: M-6582-8AK
Classic Design Valve Cover Set, Black Crinkle Finish: 6582-35A
Air Cleaner Assembly, Black, reproduction: C-3402-02D
NOTE: need 1968 302 air cleaner decal to match arc of C-3402-02D.
Valve Cover Oil Filler and Breather Cap: 6766-17D
Heater Hose Connection: 18599-10
DIPSTICK TUBE, ENGINE OIL: 6754-5
DIPSTICK, ENGINE OIL: 6750-5D
EXTENSION FITTING, OIL PRESSURE SENDING UNIT: 9B339-2
Pertronix Flame Thrower 8mm Spark Plug Wire Set, Red with 115 Boots: 12259-8MC
Wing Nut, Air Cleaner: 358871-S
Separator, Ignition Wire, Black, 4 Slots, Locking, Exact Repro, Valve Cover Stud Mount D9az-12297-B: M-12297-8A
Separator, Ignition Wire, Black, 3 Slots, Locking, Exact Repro, Valve Cover Stud Mount E6az-12297-A: M-12297-2A
Separator, Ignition Wire, Black, 2 Slots, Locking, Exact Repro, Valve Cover Stud Mount E2zz-12297-A: M-12297-6A
Jford@autorestomod.com
Insta: @autorestomod
www.patreon.com/gasolinemedia
Sponsors:
www.npdlink.com
Insta: @npd_nationalpartsdepot
www.eatondetroitspring.com
Insta: eatondetroitspring
Facebook: / eatondetroitspring
www.rrsusa.com
Insta: @rrs.usa
Facebook RRS USA

Опубликовано:

21 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@et76039 6 месяцев назад

Appreciate the tip on orienting the valve covers. 😀 Liked watching Cammage minimize the damage by being neat with the plug wires; with any kind of wiring, neatness goes a long ways to preventing problems. Yes, it is best to have the plug wires touch as little as possible. 👍Some folks don't understand the possibility of inductive crossfire, and I honestly don't know how often it happens. Better to prevent it than to troubleshoot it. 😖

@AutoRestoMod 6 месяцев назад

For sure

@hotrodray6802 5 месяцев назад

Always use helical (spiral 🙄) core wires.

@johnbarker5009 6 месяцев назад

Neat, orderly, and unified in appearance. Looks great.

@AutoRestoMod 6 месяцев назад

Glad you like it

@stephenhotzjustdriveit 6 месяцев назад

Good job and enjoy having Cam on this one

@AutoRestoMod 6 месяцев назад

Old Cam is pretty cool, isn't he?

@alwayslearning8365 6 месяцев назад

Thanks. You gave me a few ideas for my engine. 👍👍👍

@AutoRestoMod 6 месяцев назад

Glad I could help

@tomberan1282 6 месяцев назад

Nicely done, I like the look

@AutoRestoMod 6 месяцев назад

Thank you!

@dungonekrazy8902 19 дней назад

Jeff is that not a 750 cfm Holley carb on what I'm hearing is a basic stock 302 Everything I read is over carbureted by old school standards, cuz I really wanted to use the blue 750 cfm on my 302 build , but instead bought the 600 cfm 4160

@mycontinental3611 6 месяцев назад

Looks great.

@AutoRestoMod 6 месяцев назад

It does!

@tbm3fan913 6 месяцев назад

Have several chrome air cleaners and a black one like yours. You want them! My engines look so much better with the Dark Ford Blue air cleaner. Plug wires are always black. None of these yellow, blue, or red wires and I once did yellow when younger. Valve covers are fine along with Ford Cobra black aluminum covers with the bare aluminum top ribs as on my 68 Cougar. Standard Ford blue covers for the 68 Mustang. Black engines aren't my favorite as I like to see when an oil leak develop sooner than later. So a Ford 3.0 will be painted medium gray. All six of my cars run Pertronix II via a relay system, I make, which puts full voltage to the plugs.

@Thirdgen83 6 месяцев назад

Yep, black is a terrible color for an engine. I like twist-on caps for my valve covers, not push-in grommets. I like my blue ignition wires on my SBF. I hope those exhaust manifolds were given a high-temp coating (POR 15 is the best)...

@AutoRestoMod 6 месяцев назад

Right on

@pieroramacciato9434 6 месяцев назад

What was put on the threads of the oil pressure sensor tube/extender? Thanks. Good work as usual.

@AutoRestoMod 6 месяцев назад

Automotive thread sealer

@domfer2540 6 месяцев назад

I ran into the same problems, with air cleaner and fuel lines. Your air filter looks a little high to clear the hood, second to prevent the gas line interfering with distributor, I turned the fuel line from the carb and ran the fuel line behind the engine.

@AutoRestoMod 6 месяцев назад

It's honestly kind of funny I had never thought about turning the fuel line toward the back what a great idea

@hotrodray6802 5 месяцев назад

Hard to get from that fuel pump to carb on that circuitous route. Exposes a lot more heat and the fan air doesn't blow on it. Just thinking...

@aguyinnc2865 6 месяцев назад

Had no idea the Hi Po manifolds were available. Way, back in the day I wrecked my '65 Mustang GT, so I swapped the engine into a '67 Mustang with a stick. Didn't know where to find these exhaust manifolds at, so I went down to JC Penney's and ordered a set of A/FX headers for 75 bucks. Ahhh, the good old days! Now, about the Mach 1?

@AutoRestoMod 6 месяцев назад

Yes National Parts Depot stocks them although I are having problems with finding the correct longer bolts for these manifolds

@antilaw9911 6 месяцев назад

The lid would look nice with an factory checkered flag/engine size sticker on it. Yes i also like the look of a Duty engine.

@AutoRestoMod 6 месяцев назад

We are going to be using the Ford Checkered Flag 302 air cleaner badge

@stevenkryptonite1641 6 месяцев назад

Hey Jeff, I can't remember the part# but there is another option on the cap if you like the male cap it's an international distributor cap.. fits the stock application small with male spikes.. even uses the same rotor.. I'm sure someone here or maybe you might know the part number an weirdly in stock at AZ an O'Reilly, an Advanced, NAPA..

@AutoRestoMod 6 месяцев назад

I tried to find that cap as well and could not. If anyone on here knows the part number for that cap please post it up and we'll put it in the description

@hotrodray6802 5 месяцев назад

@@AutoRestoMod See my post on here of May 1 10 pm CT.. showing the complete cap video. 😎👍

@hotrodray6802 5 месяцев назад

Check my new post for full info. (Posts keep disappearing 🤔🙄)

@grantstanborough 6 месяцев назад

Hi I’m from Australia is there a power window kit I can buy for my falcon xy 71?

@AutoRestoMod 6 месяцев назад

Not that I could find

@SixRoundsStudio 6 месяцев назад

Geez Cam....and I used to love yah brother! Now you want to give me a Hot Wheel????!!!!!

@AutoRestoMod 6 месяцев назад

🤣🤣🤣🤣

@mariocooldude9092 5 месяцев назад

Superconductor

@lilorbielilorbie2496 6 месяцев назад

While I'm sure that engine looks awesome in person. When you put a black engine into a black engine bay. Something is gonna disappear. IMO.

@Thirdgen83 6 месяцев назад

Exactly.

@AutoRestoMod 6 месяцев назад

That could be true but I'm doing what the owner wants

@Thirdgen83 6 месяцев назад

You need a 13-inch air cleaner.

@AutoRestoMod 6 месяцев назад

Honestly if I had put the Ford 14 in Element air cleaner on there it wouldn't be an issue. But they don't make that air cleaner in anything but Chrome.

@hotrodray6802 5 месяцев назад

🔔😎🇺🇸 DISTIBUTOR CAP: YT video "Swapping out to a smaller male duraspark distributor cap" By... DAZE CARS... posted 1/13/24 YeeeeHaaaaw!!!! 😎

@AutoRestoMod 5 месяцев назад

You can do that but I didn't have one available locally

@413x398 6 месяцев назад

You guys are amateurs. All that green screen could have been used to have any of hundreds of movie sharks chomping on Cam as he worked. Tsk tsk, I say.

@AutoRestoMod 6 месяцев назад

We thought about that or dancing naked ladies in the background but that probably would have gotten us flagged by RU-vid so probably best to just stick with the green screen green screen LOL