Mastering Wavy Flags with Carveco Maker: Step-by-Step Guide

Подписаться 3,4 тыс.

Просмотров 2,6 тыс.

50% 1

Unlock the secrets of crafting mesmerizing wavy flags using Carveco Maker! Whether you're a beginner looking for guidance or an experienced user seeking new techniques, this tutorial has got you covered. Dive into this comprehensive guide, packed with tips and tricks, to elevate your CNC designs. Don't forget to like, share, and subscribe for more invaluable Carveco tutorials! 🔥🛠️ #CarvecoMaker #WavyFlags #cncdesignsolution
FREE WAVY BASE PACK drive.google.com/file/d/1QTAf...
JENNY BITS 10% DISCOUNT CODE = TIMBERFALLS
Cadence Manufacturing & Design www.cadencemfgdesign.com/?ref...
PwnCNC 5% DISCOUNT CODE = TIMBERFALLS
PwnCNC.com pwncnc.com/?ref=5CA0646TKIYN7e
CARVECO PRODUCTS 5% DISCOUNT CODE = TIMBERFALLS
store-us.carveco.com/?ref=Tim...
Use this discount to get 5% OFF!!
Join this channel to get access to perks:
/ @timberfalls
Check out our custom made STL models on our Etsy Store
www.etsy.com/shop/TimberfallsUS
Stuff I buy from Amazon Regularly
Danish oil amzn.to/3W5rmFK
Rubio Monocoat Oil Plus Pure amzn.to/3G1mLic
Sanding Discs amzn.to/3Yy8Oj5
amzn.to/3TD8yND
Respirator and filiters amzn.to/3C7LOOz
Hold down Clamps amzn.to/3hv1Wm5
For more info contact us @
www.Timberfalls.us
or
Facebook.com/Timberfalls.us

Хобби

Опубликовано:

9 окт 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@emostorm7 3 дня назад

Wow. That was a lot of info. Thanks

@Timberfalls 2 дня назад

Glad that helped and thank you for the feedback!

@212nailbender 9 месяцев назад

I have Maker and was told I needed Maker Plus. This is awesome !!! Thanks my friend!

@Timberfalls 9 месяцев назад

Thank you for that positive feedback on the video. Glad this one helped. Make sure and check out the video on how to make a 3d model with basic maker. That uses a trick or workaround too.

@wadetomczyk8043 10 месяцев назад

Exactly what I was looking for thank you looks killer.

@Timberfalls 10 месяцев назад

Thanks I appreciate the support!

@riazmughal2922 9 месяцев назад

Very nice

@Timberfalls 9 месяцев назад

Thank you. I appreciate the positive feedback. Glad this one helped.

@jimpalmer1944 9 месяцев назад

Jason, not ready for this yet. Maybe on our 6th lesson and I need some more bits.

@Timberfalls 9 месяцев назад

Jim I am always available for a lesson so just let me know when. Make sure and use the discount code Timberfalls to save 10% on your jenny bits.

@SL0W_RIDE_ 7 месяцев назад

How do you get the Vbit to follow the 3d wave of the flag? When I try and simulate tool path the carve isn’t at a consistent depth.

@Timberfalls 7 месяцев назад

I used a machine relief toolpath with the selected vectors of just the stars. While they were not exactly the same they were fairly close. There was some depth differences throughout the stars though.

@wdnick 9 месяцев назад

Hi? Thanks for the great video. I have a question. Instead of scaling the relief as a percentage for the stripes (9:40 time mark) is it possible to do a constant offset of say 1/8"? The scaling makes the "white" stripes a variable depth depending on the overall thickness of the model at a given point which is looking kinda weird. Short of a way to do it in Carveco I'm thinking the only workaround would be to just program the stripes at the main wavy surface and then just drop my Z offset 1/8" when I run that toolpath, but as a relative newbie that seems like I'm asking for a booboo.

@Timberfalls 9 месяцев назад

This was sort of a workaround for using maker to make these wavy flags and there is no real way to get the z to follow the wavy part without scaling the stripes. If you use a constant z it will only cut the tops of the raised parts and miss over the lower parts. If you scale it less it will have less effect on the different depths and make it look more even. The one I did came out pretty nice looking I thought.

@KnifeHandWoodDesign 3 месяца назад

Love the video but when i did this following all your stuff it says it will take 47 hours to do this cut

@Timberfalls 3 месяца назад

I would check the stepover and stepdown on your bit settings as these are usually the things that cause long cut times. For tapered ball nose bits you can run most of those .25 depth of cut because of the large cutting surface along the sides and during a finishing cut there is not much material being cut. Hope this helps.

@jimwoodworker4110 9 месяцев назад

Another great video as usual. I am going to have to try this. I went on your site to book a lesson and it doesn't work. Any word as to what is the problem?

@Timberfalls 9 месяцев назад

Thank you for letting me know about it not working on my website. I usually just set that up through facebook if you message me there or send me a message to timberfallls.us@gmail.com.

@DaddyDanz 9 месяцев назад

i would love to buy this particular file let me know

@Timberfalls 9 месяцев назад

Send me an email to timberfalls.us@gmail.com I will see what I can do.

@mattguzman73 10 месяцев назад

How would you make the stars pronounced instead of indented?

@Timberfalls 10 месяцев назад

Instead of pulling the stars down you would just pull them up at the part where I recessed them in the video using the red arrow. You can use this technique to create any kind of raised or recessed features in the flag.

@mattguzman73 10 месяцев назад

@@Timberfalls awesome video. Thank you! I’ve been wanting to do this.

@Timberfalls 10 месяцев назад

@@mattguzman73 Thanks man. Glad this helped.

@wayneinman6775 Месяц назад

Well it looks good, too bad it don’t cut like that. I followed this video to the tee and it just don’t work. Many many hours of run time to find out it cuts too high. The flag waves cut perfectly but the Stars and Stripes mostly cut air. Try again brother.

@Timberfalls Месяц назад

You missed a step because I cut this out and it looks exactly like this. I think the part you missed was using selected vector in the transform relief tool to add the stars and stripes to your wave base model. Once you do that your model will have the stars and stripes in it and can be carved with a machine relief tool. Watch the video on Marine Corp relief with carveco maker video and I go over this hack in detail as well. Hope this helps.