MATHEWS PHASE 4 BOW BUILD 

I wonder what Chris would say if he wasn’t sponsored. I’m not knocking anyone but I’d like to hear cons along with the pros.

Doesn’t get any better to sit back and watch you build and shoot a new Mathews! 🔥

You should do a comparison between the v3x and the phase 4 with the same shrewd stabilizers on the phase 4. I think that would really show the difference between the limbs itself. Also it would show the difference between the new bridgelock stabilizers and a regular stabilizer setup. I’m excited to see more with the phase 4!!

What impresses me is going for the lower right dot at 125 yards. That's confidence and accuracy magnified!

It would be a dream for me to have a bow like that. I already have my Mathew’s set up planned out for when I get older. I like that Mathew’s continues to make new things and talk with people in the community to see what we all want.

I like the stabilizer set up but $270 for a stabilizer is absolutely nuts. That's just for one. That's not even counting the rear stab and the mount lol. Wow

Great Video and breakdown, as usual. I'm definitely intrigued by the bow but like many, have some reservations about the durability of the limbs. It DOES certainly seem quieter, even in the vid, so I assume it's even more (or "less") noticeable in person. An easy test to maybe see what is doing the most vibration-dampening (new limbs vs bridgelock stabs)...would be to put your Shrewd stabs on the 'standard' mounts on your Phase4 and see how much, if any, vibration comes back. Keep up the great work.

I been only watching your contect for a couple weeks now. It has been super helpful and gets me excited to eventually get my first bow.

Watching your videos taught me a lot about hunting and bow’s themselves. Keep up the good content.

This just in. Mathew’s has announced the new bow for 2024! The phase 4X!

Love watching the build videos! Shop is coming along really nice

I love everything about the history & story behind Matthews, with that said I'm so tired of the death by a hundred cuts (( extra added costs before you escape out of the shop )) but as everyone will state that's the way of everything nowadays.

With the Bridgelock stabilizer mount, Mathews created a solution in search of a problem that didn’t exist.

Love these build videos, great comparison between the two bows! Thanks for keeping up with the great content, your work is greatly appreciated by us all!

I am absolutely in love with this bow. And the UV button release. Buttttery smooooth

It’s nice too with those stabs is you can slide them in to fit in your bow case or if your hiking up into country so it’s not catching on anything. Simple and quick slide out and you’re ready to go

Another great video. I would really love to do one of these builds with the phase 4 in the future when I can afford it because I’m only 15 😂. You have inspired me so much to get into bow hunting, and I have learned so much from your videos, thanks.

Just spec'd it out on Mathews website and subtotal was $2,650 before tax. I will definitely keep the Halon.

Super enjoy watching this build, great reviews between the two bows! Thank you !

Awesome video. I have learned a lot watching your channel. Watching your channel is what turned me to shooting Mathews, I used to have terrible shooting form, and I learned my draw style from you and I have learned a lot about customizing bows and arrow builds. It would be a dream of mine to be able to get a new Mathews bow and to be able to do a bow build with you. Awesome reveal video. Thanks for the insightful content.

Would love to have a bow built by you Chris….Such awesome videography all around

Mathews day is the day I always look forward to, thanks for the video Chris.🤙🏽🐝

Thanks Chris! Great video! 👍

Mathews are solid bows. Loved my vxr. I’ve been shooting Hoyt for a couple years now and I will give it to them that instead of coming up with new tech to have people spend $250, they come up with their little nub stabilizer and include it with the bow!

$250 per stabilizer and $200 for the bridgelock. Your setup here for JUST the stabilizers costs over $700, including tax. That's really hard to swallow... Who's idea was it to price stabilizers that high??

Talks about how these integrate stabilizers eliminate screws and vibrations…..proceeds to put on more screws and brackets just to attach the stabilizers

Looking forward to getting this full setup within the next two months

Love it. Gotta have one!

I love my v3x 29 in granite. I have the hamskea epsilon rest made for mathews. The bows have the same specs.

Always been a hoyt guy but I love release season for all brands. I appreciate the engineering behind all the new bows.

Love the bow builds keep it up

Man, i would love to have a shed like that... I know it's a LOOOOOT of time, effort and work that went into it... But seeing it all the way in europe, it looks freaking amazing!

My question is, if you re-served the center serving the same way to give the arrow a natural left-spin at the shot, are your arrows also fletched with left helical? A lot of archery shops and archers don't realize how important it is to fletch their arrows to spin the same way they leave the string. Personally, I make my strings with a natural right spin on the serving, so I always fletch with a right helical.

Love the Bow builds

I hardly shoot archery anymore. But I still love your build videos. Nothing slaps like a tuned bow 👍🏼

Looking forward to this for Christmas 😅

Went and got my Phase 4 today. Had a concert to go to right after so getting up in the AM to sight it in.

That’s some good felt work pal!!

Great video Chris! Love watching you content… perhaps it’s time to upgrade from my Tactic. Thanks for all the great info! Merry Christmas to dad this year 😂

Regarding re-serving for better nock fit... What size serving are you typically using? I think average is .020 for center serving, but I may be wrong. Are there certain materials that servings a made from that you feel are best for center serving vs end serving etc.? Thanks! Always enjoy the content!

Love this! You can tell it has a different sound and is quieter. One question is the down angle on your front stabilizer. With the bridge lock you give that up. Is it worth it??

Use black KT athletic tape on the rest. Way better than the QAD felt and silent! I covered the rest fork and made a pice to sit on top of my shelf and it’s perfect. And has lasted 10x longer

I would say set it at 13/16 like you said shoot a bearish after paper if you get a big tear turn the Knock First to make sure it ain't a bad Arrow then switch the top hats try it again try turning the knock again that's how I found a lot of them I'm going to tell you right now though I love this Channel and I love what you do and I'm so very proud of you buddy I like Matthews the TRX it was a very hard in between to choose in between it or the BowTech Reckoning I chose the Reckoning I shot three shots off that new SS 34 and had a bullet hole with a bear shaft that's because you could move that cam left to right on the line it is so very dead in the hand and will absolutely pound arrow for Arrow and 50 yards

hopefully this means more bridgelock sight options soon

Miss these bow builds

I love watching him build the bows i wish I had a bow like that but I’m gonna gat one

Thank you, job well done

I love the review, thanks.

I just got my stage 4 and I love it and mine on the crono hit 319 on 70 pounds

That is the absolute sickest setup I’ve ever seen.

It a solid shooting bow it’s definitely quiet got to shoot it at my part time job today

Well, that’s about perfect! Wouldn’t except anything else would we? Good looking bow over all.

Dude keep up the work I love the vids man

The arrow rest smacking the riser makes more noise than the bow does. That's pretty badass.

I think that back bracket would be a bit cumbersome, you have to make sure to put it in correctly. A regular bracket has a quick disconnect you put in, twist it tight, ready to go whereas this has to be put in almost like a sight bar

Bro that is sick

saweet... ordered mine today

I bought the z7 extreme, then the creedxs. Hated the creedxs. Stuck with my z7 until I bought a halon 6. Hated that bow too. Shot a triax and loved it but needed some tweaking. Own currently a vxr28, a v3 27”, and a v3x 29”. They all shoot exactly the same. I say all this to get to my point….. if you like the new small features then buy the new bow, it’s as simple as that.

I might have to get this for Christmas 😅

Have been saying for year Mathews needs one more size addition to the top hats. They need a set that’s equal on both sides putting the cam in the dead middle of the limbs. I’ve seen many guys land right between 2 sets where they get a tail that changes like yours did.

When are you going to come out with your Chris Bee 🐝 Stabilizer edition? I just bought my Mathews Phase 4 still waiting for the bow shop to adjust my rest so I haven’t even shot it yet, but I shot one of the other 4s they had there.

Well… I really want to get a new bow but when I buy one I keep it for YEARS! I’m worried about the rubber rotting between the Limbs / wearing out. Just another thing to maintain.

I like it. New technology. Everything always expensive for these bows. Pay it once and take care of it, I tend to Keep mine for years. Good job Chris.

I'm kinda disappointed. I've been waiting to buy a new bow since my VXR but there hasn't been a reason to. This is yet again the same bow minus the limb gimmick. And to be honest the V3X sounded a touch quieter in this video

What’s your arrow weight, type, length, build etc.? Would like a bow tech to explain what they are doing like you are. Haven’t had consistent “help” and with a $1500 toy I want it perfect.

i’m a mathews fan, but dangit hoyt, and bow tech make so many different looks, and different bows made for different things. Mathews just has their flagship, target, and youth.

Okay Chris, you've sold me. I'll be down next week so you can set up my two Hoyts and one Mathews bows for me. If only.

In all of the Mathews Integrate rests you’ve had, have you ever experienced sticky launcher springs? Like the spring in it just isn’t butter

Lol Chris how in the world did you already get your hands on a phase 4 which just released today? You gotta have a Hella serious sponsorship with them. Thanks for the content and your thoughts of the bow for this coming year

I know this video is older, but is there anyway to get a more detailed model/mount part list for this sight? Just got my phase 4 and this type of set up, especially the sight and ability to mount through the riser is exactly what I want. Any help is greatly appreciated!

I had thought you were a part of the design process. I’m hearing its time to upgrade my vx3

Can you explain a bit about maintenance and the longevity of a compound bow ? What needs to be replaced if there’s anything that does wear out or not ? I’m considering getting a compound bow and would like to know your thoughts . Cheers 🍻

Chris do you prefer to wrap the center serving by hand instead of using a jig?

you're awesome man!

Hey it's way different sounding bow sounds nice to me

Just curious, like what do you do with al your old bows. Do you just hang them on the wall and never touch them again or do they al get a different purpose. It feels like you have about 15 bows or more.

First interested but just got the v3x so might have to wait

What type of serving material do you use for the center serving?

Would you recommend this bow for a beginner?

Chris, i'm having a problem with my peep sight on my v3. i've taken it to my pro shop multiple times and it keeps twisting. they tell me it's fine. but again i was shooting today and hitting to the left. adjusted the peep to line up straight and dead center shot. besides going to a different shop lol, what can i do?

Wonder what bows will be like ten years from now. If your watching this is the future please let me know? When’s the 4x4 coming out? 4 limbs 4 cams no riser just a laser 😀

What's a good estimate on your setup for the Phase 4?

@chrisbee how did you cut your UV slider down to fit more flush in your bow?

Finally the 23 bow!!!

What do you think of the bear g2 cruzer as a beginner bow?

Could you eventually buy the phase 4 limbs for the V3X

“Catch us if you can” Mathew’s new stabilizer to my wallet!! 😅

Every year I’m here to watch the new Mathews drop. I got the v3 when it came out because of this vid. Now maybe the phase 4!

I dont like how long it took him to get a bullet hole. He is a professional archer and the way he sped up the video while doing that tells me he didn’t get it perfect. That shows you how the dead lock system is far superior of a tuning system. I’ll let this go for a year and see what type of warranty issues they have.

I just set up my hha virtus drop away. I have a bullet hole but the arrow is shorting way left compared to my whisker biscuit,should i take it into a shop?

Now that the phase 4 is out, I’m gonna see if I can find the v3x on sale. Lol my opinion, I honestly don’t see that much difference or hear that much difference. I will still test shoot the new one. Never know, that might change my mind. Lol

Can’t wait to go shoot one today awesome video review Chris🐝

Just bought my new Mathew's last night!!!

This bow is sick. I bet it shoots pure with the rubber in the limbs and the bridge lock stabilizer. I need to upgrade. Wish I could afford one like this. Keep up the videos. Always like watching.

I wonder if it’s at all possible to take the limbs and put them into the v3x previous generation bow 🤔 just a thought

I love watching your bow builds do you think you can do one with the new youth Image bow

Hey do you know what serving size you used? Gonna have to do the same thing! My 4mm nocks are to tight.

Would love to get the same string and cables as you have for my V3x. Can anyone point me in the right direction on what brand he is using?

Chris. How come you choose a cable driver vs a limb driver rest?

What about 10 degree down on the new stabilizers?