No video :(

MatrixGold Pendant Two Tone

Подписаться 4,1 тыс.

Просмотров 1,9 тыс.

50% 1

In this video we will show how to make a two-tone dome pendant. We will be using MatrixGold Auto Base and Smart flow to design the dome of the item. We will also be using MatrixGold Pave Gems and Prongs on Surface. I hope you find the content useful and helpful in your designing process. If so, please think about hitting that subscribe bell, tap on like, leave a comment and share the content for others. Thanks so much for your time and support. Much appreciated.
If you are just starting out in 3D printing, I would recommend going with one of these printers at a low cost and get familiar with the printing and adding supports and then maybe level up to a faster and higher priced printer. Keep your cost low to start until you become familiar with everything that 3D printing has to offer. Anycubic Printers and resins:
shareasale.com...
discount code: www.shareasale...
Here are some links to some equipment, Printers and other items that might interest you.
Elegoo Saturn 3D printer from Amazon n amzn.to/41CgeDU
Jewelry Casting flasks amzn.to/3tnCQvq
Vacuum Casting Machines from Amazon amzn.to/48b5KxH
Elegoo wash and Cure station amzn.to/47dOOWg
Jewelry tools and supplies amzn.to/3H06zNZ
3D Printers and Resing: amzn.to/3TTclc6
Vacuum Caster Melting Furnace amzn.to/3tOVSeb
Tumbler for castings: amzn.to/3tNBmL6
Other videos that may be useful:
• MatrixGold Award or C...
• MatrixGold, Matrix. R...
• MatrixGold, Matrix, Rh...
• MatrixGold Curve Thick...
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
• MatrixGold Add a unde...
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
/ @donsjewelrymakingandj...
@donsjewelrymakingandjapantrave
Facebook Group help: Users helping Users
/ 195166233291059
#jewellery #jewelry #jewellerydesign #3drendering #jewelrydesigner #designer #customjewelry #finejewelry #howtomakejewelry #howtodesignjewelry #howto #caddesign ##3dprintingdesign #3dshoftware #howtodesignjewelry #cadtutorials #3dtutorial #howtomakejewelrytutorial #jewelrymakingtools #highfashionjewelry #3dprintingdesign #3dtutorial #jewelrycollection #jewelrybusiness #caddesign #gemvisiointutoiral #gemvisioinmatrix #gemvsioinjewelry #rhinoceros #freecad #tinkercad #autocad #autocadtutorial #rhinojewerlymaking #gemvisiontutorial #gemvisionmatrix #gemvisionjewelry #rhinoceros3d #tinkercad #autocad #autocadtutorial #jewelry #rhinojewelrysoftware #gemvisionvirtualsummit #matrixgold #transparentbackground #transparent #rhinoceros3d #rhinoceros #rhinojewelrysoftware #rhino #matrix #matrix9 #caddesign #3dprintingdesign #autocad #3dtutorial #3Dmodeling #jewelryguidtoprongthickness #jewelrydesigns #3djewelrytips #3djewlerymodels #fashion #ladiesfashion #ladieswear #matrix9
#matrix
*Disclaimer: This video or video description contains affiliate links. That means that I am awarded a small commission for purchases, at no added cost for you.

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@ParisaJey 2 месяца назад

Can not say how much grateful I am, for learning all these golden tips. It is obvious that this is the result of too much experience, time and effort. Thank you very much for sharing 🙏

@donsjewelrymakingandjapantrave Месяц назад

Thanks, Yea, too much time but it is starting to get a little difficult to continue. Not really any money in it but I enjoy trying to help others. But maybe need to focus on selling my product instead of making videos. I hope the content is helping. Appreciate your comment and all your support.

@ParisaJey Месяц назад

@donsjewelrymakingandjapantrave sorry to hear that, but wish you all the best Thank you

@carinevanniekerk9506 5 месяцев назад

Thank you so much Don. I am learning so much and appreciate you 😊

@donsjewelrymakingandjapantrave 5 месяцев назад

Wonderful! That goes both ways. lol thanks again for the comment and the support.

@AhmetAkbey Год назад

thank you

@donsjewelrymakingandjapantrave Год назад

No thank you for everything.

@arabiclearner711 Год назад

Thanks so much, I always wanted a great tutorial to teach this, all I ever found were speed builds and it is pretty much impossible to follow along with those 😅, thanks again brother !

@donsjewelrymakingandjapantrave Год назад

Yea, I have watched a lot of speed tutorials and really find them difficult to follow along as well. I refuse to make them myself. I think it is much better to go through and show step by step how to make things. Really appreciate your comment and your time. Thanks for your support. Sorry for the late reply.

@chzaryab488 Год назад

excellent video sir.❤🙏🙏

@donsjewelrymakingandjapantrave Год назад

Thanks. I have to ask you since you have been watching the channel for a while now. I just started a new series on going through all the ribbons and commands along with the command line options. Do you think this type of content will be helpful or do you think most would rather see different designs being made. I still plan to upload designs but was going to do the commands as well. Not sure it is the right path or not. Your thoughts would be greatly appreciated.

@chzaryab488 Год назад

@@donsjewelrymakingandjapantrave (Thanks. I have to ask you since you have been watching the channel for a while now.)i always will be watch your channel.(I just started a new series on going through all the ribbons and commands along with the command line options. Do you think this type of content will be helpful or do you think most would rather see different designs being made.)God bless you sir i really want you to do this. if i well known with all commands designing will easy for me.(Not sure it is the right path or not. Your thoughts would be greatly appreciated.)if you do this i will be Thankful to you and my good wishes always with you.

@joaoluizxavier6157 Год назад

Another video to enrich my library. thanks

@donsjewelrymakingandjapantrave Год назад

LOL Hope to grow that in the future. lol Thanks for the comment and all your support.

@humbertocastillo9439 Год назад

Thanks for the tutorial . Excellent pendant design.

@donsjewelrymakingandjapantrave Год назад

It was a fun one to make. I can see all kind of possibilities with this type of design. Thanks for your support and your comment.

@vidhyamotapothula9311 Год назад

can you please make a video on how to make different types of bangles and ear rings

@donsjewelrymakingandjapantrave Год назад

Very good idea. Yes, I will lean more to those in the future designs. Thanks for the suggestion and your support as well as your comment.

@cansahinoglu Год назад

Nice educational work Don. Thanks

@donsjewelrymakingandjapantrave Год назад

This one was a fun one to make. I know I can ask you questions, and you will give me a straight answer. I just started a new series on going through all the ribbons and commands explaining about how to use them and their command line options. Is this something that you think people will find useful or do you think they would rather see making different designs. Not sure I'm venturing on a good path.

@cansahinoglu Год назад

@@donsjewelrymakingandjapantrave Your thinking is very logical. Before designing, wee need to know the basic commands. Because it's hard to do in design without knowing how to use commands. Otherwise, it will be memorization and different things will not occur.

@iliajebirashvili8895 Год назад

so cool 👍👍

@donsjewelrymakingandjapantrave Год назад

Thank you!

@bsmith4996 Год назад

Hi ,can you direct me to the setting that adds the rhino buttons to the interface. I’ve seen you do it but now can’t find that setting or video. Thanks Brian

@donsjewelrymakingandjapantrave Год назад

Type options into the command line hit enter. This will give you the Rhino options pop up. At the bottom you’ll see toolbars I think second from the bottom. Click on that. Then it will give you a list of all the Rhino toolbars you can load. Scroll down until you see the one that says 16 or 13 that will give you all of them. Just click the box and click ok and you’ll have all the tabs for the Rhino options.

@iliajebirashvili8895 Год назад

Can you make a video on how to render well and what we should consider to get a good result? How to set the right color for a diamond to be ideal? Because the white diamond in MatrixGold has an unnatural color. Thank You 👍💎

@donsjewelrymakingandjapantrave Год назад

Yea, The Cycles Rendering has a little more learning curve to it. But If you have the 3.0 or later update you should have the Vray diamonds and metals. They will help you out in the rendering area. I will try to get some more content up on rendering soon. Thanks for the suggestions.

@arabiclearner711 Год назад

@@donsjewelrymakingandjapantravecant wait

@hellodd6 4 месяца назад

Hello, may I ask how to make a line thicker like yours? 1:00

@donsjewelrymakingandjapantrave 4 месяца назад

I just put up some content on how to change the thickness of the curves in Matrix 9, MatrixGold 3.0-3.5 and MatrixGold 3.8. I hope it answers your question and helps.

@HewadyHewady Месяц назад

where can i download that picture ?

@donsjewelrymakingandjapantrave Месяц назад

I just pulled it off the net. I just typed in drawings and started looking through to find one that might be interesting. There are 100s that you can do the same thing with online. Can't remember exactly where this one is, or I would tell you. Sorry about that. I do appreciate you leaving a comment and your support.

@HewadyHewady Месяц назад

@@donsjewelrymakingandjapantrave okay, i got you and I just wanted to say thank you for your amazing videos. I started learning MatrixGold a month ago, and your tutorials have been incredibly helpful.

@donsjewelrymakingandjapantrave Месяц назад

Thats awesome. Thank you for the comment and the support as always. Greatly appreciated.