MatrixGold Scroll work Part 1 using polysurfaces

Подписаться 3,8 тыс.

Просмотров 1,5 тыс.

50% 1

Part 1. In this video we will show one of many ways to make scroll work for your designs. This will be a very simple way of making it, but we will build on this content. There are many ways to make scroll work such as using emboss and clayoo. So, this is just one and a very simple way of designing it. We will go back and show more ways to design and edit this content in future videos, but I hope this will give you a starting point for understanding on how to make it. I hope the video is useful in your designing endeavors and if so, please think about tapping the bell to subscribe, hit like and leave a comment. Feel free to share the content as well. Thanks for watching and good designing.
If you are just starting out in 3D printing, I would recommend going with one of these printers at a low cost and get familiar with the printing and adding supports and then maybe level up to a faster and higher priced printer. Keep your cost low to start until you become familiar with everything that 3D printing has to offer. Anycubic Printers and resins:
shareasale.com/r.cfm?b=138449...
discount code: www.shareasale.com/u.cfm?d=11...
Here are some links to some equipment, Printers and other items that might interest you.
Elegoo Saturn 3D printer from Amazon n amzn.to/41CgeDU
Jewelry Casting flasks amzn.to/3tnCQvq
Vacuum Casting Machines from Amazon amzn.to/48b5KxH
Elegoo wash and Cure station amzn.to/47dOOWg
Jewelry tools and supplies amzn.to/3H06zNZ
3D Printers and Resing: amzn.to/3TTclc6
Vacuum Caster Melting Furnace amzn.to/3tOVSeb
Tumbler for castings: amzn.to/3tNBmL6
Other videos that may be useful:
• MatrixGold Award or C...
• MatrixGold, Matrix. R...
• MatrixGold, Matrix, Rh...
• MatrixGold Curve Thick...
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
• MatrixGold Add a unde...
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
/ @donsjewelrymakingandj...
@donsjewelrymakingandjapantrave
Facebook Group help: Users helping Users
/ 195166233291059
#jewellery #jewelry #jewellerydesign #3drendering #jewelrydesigner #designer #customjewelry #finejewelry #howtomakejewelry #howtodesignjewelry #howto #caddesign ##3dprintingdesign #3dshoftware #howtodesignjewelry #cadtutorials #3dtutorial #howtomakejewelrytutorial #jewelrymakingtools #highfashionjewelry #3dprintingdesign #3dtutorial #jewelrycollection #jewelrybusiness #caddesign #gemvisiointutoiral #gemvisioinmatrix #gemvsioinjewelry #rhinoceros #freecad #tinkercad #autocad #autocadtutorial #rhinojewerlymaking #gemvisiontutorial #gemvisionmatrix #gemvisionjewelry #rhinoceros3d #tinkercad #autocad #autocadtutorial #jewelry #rhinojewelrysoftware #gemvisionvirtualsummit #matrixgold #transparentbackground #transparent #rhinoceros3d #rhinoceros #rhinojewelrysoftware #rhino #matrix #matrix9 #caddesign #3dprintingdesign #autocad #3dtutorial #3Dmodeling #jewelryguidtoprongthickness #jewelrydesigns #3djewelrytips #3djewlerymodels #fashion #ladiesfashion #ladieswear #matrix9
#matrix
*Disclaimer: This video or video description contains affiliate links. That means that I am awarded a small commission for purchases, at no added cost for you.

Хобби

Опубликовано:

12 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@AghaZee-lf2zm Год назад

Thank you sir wonderfulllllllllllllllllllllllllllllllllllllllll

@donsjewelrymakingandjapantrave Год назад

Very kind of you. Thank you for your support and comment.

@ParisaJey 2 месяца назад

wonderful, wonderful, Thank you🙏

@donsjewelrymakingandjapantrave 2 месяца назад

Thank you so much. Really appreciate you taking the time to leave a comment. Also, really appreciate the support.

@user-gy2zv7vc4x Год назад

I like when you say that you don't want to take our time. That's very kind of you but, I'll say please do take our a lof of time as much as you want . :) Cos there is so much to learn about plus seeing the tools you use in different ways is great experience. In each details that's wonderful to catch something new each time. Thanks again for your efforts and generosity for sharing what you know about the MG. Have a good day. 🙏

@donsjewelrymakingandjapantrave Год назад

Very kind of you. I'll try to do my best to help any way I can. Thanks for the comment and the support.

@AhmetAkbey Год назад

thank you :)

@donsjewelrymakingandjapantrave Год назад

Very Welcome. I hope it helps

@jayneweber5510 Год назад

Excellent video‼️🙌🏻👏🏻👏🏻👏🏻

@donsjewelrymakingandjapantrave Год назад

Thank you very much. Very kind of you to say. Much appreciation.

@joaoluizxavier6157 Год назад

Donald my friend and teacher, you overcome yourself every day, you shined with that heart, congratulations.

@donsjewelrymakingandjapantrave Год назад

I wish I felt the same. lol I think I could have done a better job. It was a great experience. Honored to have played a part in it. The Gemvision MatrixGold staff are wonderful people. They are really putting in the effort to make the program better and better for all of us. I'm not just saying that I truly believe it. Thank you so much for your comment and support. You are awesome!

@cansahinoglu Год назад

I'm looking forward to the sequel.

@donsjewelrymakingandjapantrave Год назад

Sorry it's taking so long. Last week I was tied up with other obligations. I will get on it soon.

@cansahinoglu Год назад

@@donsjewelrymakingandjapantrave No problem Don.

@chzaryab488 Год назад

im waiting for this video sir thank you for making it for us.

@donsjewelrymakingandjapantrave Год назад

Yes sorry taking so long. I have been totally busy with obligations last week but should be able to have more time to put up content in the next few days.

@abolfazlbehshti7422 Год назад

Very very very very very very very very very very very very very very very very good very very very very very very very much thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks

@donsjewelrymakingandjapantrave Год назад

You are more than welcome. I hope it helps.

@mawia225 4 месяца назад

AMAZING ! more of these videos please and is there a part 2 ??

@donsjewelrymakingandjapantrave 4 месяца назад

We are working in that direction. Sorry about the slow pace. I will be doing more of these and different ways to do them in the near future. Keep checking back but it should be within the next few weeks. Really appreciate the comment and the support. Thank you.

@robertreed5424 Год назад

Thank you , once again I have learned a lot in 30 mins , you can make it longer I don’t mind , I never realized that you can use rhino commands perfectly in matrix gold , thank you for your time , can’t wait to see another !!!

@donsjewelrymakingandjapantrave Год назад

Yea, Rhino is a big part on the learning curve. Love the program.

@dyamonta Год назад

More than wonderful work You are an inspiring and creative person thank youuuu ❣❣

@donsjewelrymakingandjapantrave Год назад

Thank you for the kind words. You guys are the greatest.

@dyamonta Год назад

@@donsjewelrymakingandjapantrave ❤❤

@dreamhunter2542 Год назад

My friend it is me again... firstly, i did many shapes like these using sweeps, and i noticed that your method is a little different than mine but they kinda complement each other, so i wanna thank you first of all and if you may i would also like to offer a humble idea regarding the second shape... so when you traced the outline of the second shape, i thought you left the sharp edge open so you'll blend curves later on, but you didn't, instead you left them wide open and you placed a another cross section like the one you placed on the opposite side, now this method works but it won't give you a sharp corner which it didn't, and you had to cap it off by a parametric cap and you're lucky that it somehow worked, what you could've done instead was simply join the end of the curves into a sharp edje and then sweep 2 using the "point" option in the command line of the sweep 2 order as follows: sweep2, select first and second rails, select cross section the press "point" in the command line befire executing the order and it will sweep the cross section smoothly to the sharp corner without any distortions. thank you again, greetings from Lebanon, and if you ever decide to travel for a holiday i would gladely host you in our beautiful country. good luck again sir.

@donsjewelrymakingandjapantrave Год назад

Long time. Hope all is well with you. Yea, I totally understand what you are saying. I thought about most of what you said but went ahead and did it this way. lol. I really don't like doing sharp edges or points because of casting issues but sometimes they are not that bad. But Thanks for add all that so other people can see it and learn. Much appreciation. Would love to go to Lebanon someday. If I get the chance, I'll take you up on the offer. Thanks so much.

@balentinecojewelers1595 Год назад

So, when it comes to using free form and smart curve tools I struggle. My curves look janky, and I usually make it worse trying to tweak them with the edit points. Is this something that takes practice to get good with or do you have some tips to do better using these tools to draw?

@donsjewelrymakingandjapantrave Год назад

Sure! I’ll be doing another video on scroll work soon. Hopefully have it up this weekend when I do it I’ll talk more deeply about how to draw smoother cures and how to achieve the best results. Gemvision staff recommends only using up to degree 3 curves. Are you knowledgeable on understanding what the degree of a curve is and how the degree effects the curves and edit points?

@balentinecojewelers1595 Год назад

@@donsjewelrymakingandjapantrave Awesome! I have been learning MG from Gemvision videos exclusively for the past year with no prior experience in CAD or bench work. I have learned a lot that way, but I am glad to have found your channel, it is helping a lot become familiar with different tools and methods of doing things. To answer your question, no I am not knowledgeable curve degrees and their effect on edit points. When I use the rebuild tool, I am really just winging it lol.

@donsjewelrymakingandjapantrave 10 месяцев назад

It is suggested by the GemVision staff that you only go up to a degree 3 in MatrixGold or the older Matrix programs in order to maintain control. So really you don't need to dive into those too much. Really appreciate your support and comments. By the way how are the classes at Stuller. I only attended classes before Stuller took over Matrix and Gemvision. would like to attend some hopefully in the future.

@balentinecojewelers1595 10 месяцев назад

@@donsjewelrymakingandjapantrave Thanks! I enjoy the Stuller classes. Beau is really knowledgeable, and I enjoy the sense of community you get from the classes and Gemvision forum as well:)

@FedericoMirvi Год назад

Grazie Mr Don, le volevo chiedere se nei prossimi video oltre ad insegnarci i vari comandi potesse includere qualche nozione da maestro orafo..(per esempio come va posizionata una fresa, come fare al meglio i rembi di un castone ecc..) gliene sarei davvero molto grato! come sempre la ringrazio e le mando un saluto dall'Italia

@donsjewelrymakingandjapantrave Год назад

I will try to make some content on that as soon as possible. It's a great idea. Thanks for the suggestion.

@FedericoMirvi Год назад

@@donsjewelrymakingandjapantrave 🙏❤