Maximizing Drill Press Storage - With Removeable Bit Storage

Подписаться 263 тыс.

Просмотров 99 тыс.

50% 1

PART 2
Organization and storage is key to making the most of my small shop.
That is why I wanted my new drill press stand to have as much as possible functional storage and organization drawers.
Purpose-built drawers to maximize my drill press storage.
Maximizing Drill Press Storage - Part 1:
• Maximizing Drill Press...
To support my channel visit one of our merch stores:
USA - teespring.com/...
EU - teespring.com/...
Or follow my projects on social media:
Facebook: / woodworkjunkiesite
Instagram: / woodworkjunkie
Check Out My Gear (Affiliate):
USA - www.amazon.com...
UK - www.amazon.co....
Other videos you might like:
Building the ultimate small workshop All-In-One bench (Playlist):
• ALL-IN-ONE Woodworking...
One-Of-A-Kind Tapering Jig
• One-Of-A-Kind Tapering...
Sander And Sand Paper Storage And Organizer
• Making The Complete Sa...
Rust To Riches - Table Saw Restore
• Did I Buy A Diamond In...
Some product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support.
Disclaimer.
All of the videos on this channel are intended for entertainment purposes only.
Should you choose to make or do anything as depicted on this channel you would do so at your own risk.
Woodworking and the use of power tools can be extremely dangerous.
The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct.
Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer.
Always use protective gear where applicable and never attempt something you are not comfortable doing.
Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do.
Please, stay safe and work smart.

Хобби

Опубликовано:

23 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 154

@benbrubaker7896 3 года назад

Thanks for demonstrating the process of template cutting and routing. Most makers will go straight for the CNC machine.

@deucerider430 3 года назад

Super shop piece! A piece worthy of being in your living room! Oh wait, as a woodworking person, the shop IS your living room! 😉

@ericrickert3045 3 года назад

You, my man, are the expert at using every bit of space!

@tavosurfs 3 года назад

I like the handle much better than a store bought one. Great idea

@jumar360 3 года назад

I wonder if your house is this organized. Great job!

@johnyfriesen 3 года назад

That drill press stand looks really nice I like your work

@deliciousadventures4028 3 года назад

This cabinet is very functional!Great job!

@mountris7can 3 года назад

One of the best cabinets I've seen inside here!.If not the best.. Keep the good work mate.Greetings from Greece

@GeeDeeBird 2 года назад

I might have put the push-to-open devices on the bottom of the drawers to they would be less intrusive... Thanks for sharing!

@greaser5691 3 года назад

15:00 Dome nut or acorn nut are the usual names for those things. :)

@WoodshopJunkies 3 года назад

Great! Thanks!

@zafarsyed6437 3 года назад

Ditto. Acorn nuts are very useful when not trying to rip clothing or skin open. Especially useful in exterior or bathroom light fixtures as well

@nickgenericusername 3 года назад

Never imagined those kinds of push to open hardware to be strong enough to push the whole middle unit out! good to know

@philipjones9297 3 года назад

How in hell do you come up with these ideas!!!!!! That’s the best looking thing on RU-vid, I gotta have a go at copying this 👍👍👍

@anewman513 3 года назад

I was going to ask the same question. I am ever amazed at these ideas and the precision of the result.

@andrewarcher880 3 года назад

Do you have plans available?

@shawnr771 3 года назад

@@andrewarcher880 Check his website.

@SKTWoodDesign 3 года назад

@@anewman513 mee too

@chrismullin8304 2 года назад

Nice build! Being organized creates more usable space.

@thierrybesse7834 2 года назад

Hello, I am French, I have been following you for a few days on RU-vid. I love what you do, your work is super neat and above all what creativity, it's super functional what you do. I'm appreciative. Good for you. Friendship Thierry

@mechminded2207 3 года назад

Lugnut. One of my favourite hardware terms and insults.

@router5840 3 года назад

In the UK a dome headed nut,Merry Christmas.

@dougveganparadisebuilder5808 3 года назад

What do you mean you had no time for finishing the ultimate part!? Ahhh, you had to trim that big beard... Fantastic job! The storage cabinet, of course. Really neat design.

@_WillCAD_ 3 года назад

Great piece of shop furniture. So nice, in fact, that it practically cries out to have a little insert on the front to complete the trim where the base of the drill press sits. Just for looks, it would come out whenever you need to remove the drill press. It's also crying out for some kind of finish. I know you don't usually finish your shop furniture, but this one looks too nice, it needs some protection. Even just some spray poly would be good.

@guillermosolanorosa1805 3 года назад

Very nice job. A lot of ideas in only one project. congratulations!

@remoc52357 3 года назад

Buddy you are amazing with your ideas........you have an incredible mind!

@laurabarrerablas1831 3 года назад

Que belleza de mueble. Todo es perfecto!. Gracias por mostrar.

@brucekokkinn6347 3 года назад

Clever conception, well thought out and well constructed!

@rouxanh6694 3 года назад

Looks pretty cool... Like it a lot.... You should paint it to match the new color of your new saw color

@lesd40 3 года назад

It's nice like a jewelry box. Maybe you could make a smaller version for your wife for Christmas next year.

@drhender6943 3 года назад

Very nice stand! I may need to build one of those myself.

@cequelec3479 2 года назад

Superbe, très bonne idée 👍

@superchile9640 3 года назад

That jig is cool. Great job

@benjaminshipley7789 3 года назад

Nice middle drill bit idea, sweet! And cool trim with MDF and the plywood.

@RoyBlumenthal 3 года назад

Excellent.

@heavymetallife398 3 года назад

very nice job mate

@kayhaverkort4220 2 года назад

Verry nice build 👌 lots of thought went into utilizing every cubic inch of that place. However I don't suspect the push to open poppers will have a long life with the weight the drawers full of bits and drills. I advise doubling them up. Even more practical would be to just use a handle. Yes they will probably mess up the clean look a bit. But when working it's easier and faster to throw them open and shut without a thought. Personally I love the poppers but only to create a clean look in the house whare I'm not constantly opening and closing doors and drawers in a hurry.

@miker9951 3 года назад

And you answered my question... Can't wait to see it.

@mariushegli 3 года назад

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

@JosephASorrentino 2 года назад

That was a lot of effort for rounded corners for the drill bit storage! I don't think it looked any better than straight. great job!

@DaBuild 3 года назад

Very nice content! :) Love the different drawer's ideas

@dpmeyer4867 3 года назад

good job

@dougggiereid 3 года назад

Best drill press stand I have seen. I have watched many RU-vid videos and yours are some of the most innovative. I was wondering why you used dados instead of rabbets for the top and bottom pieces, but then your handle idea and push to open plan explained this. Really good ideas. I really don't know where you get the inspiration for such clever yet easy to build ideas.

@jaytea1985 3 года назад

This is amazing, Jean! Really well done!

@fabriceseverin8030 3 года назад

good work

@helderlage 3 года назад

WOWOWOWOW... as allways, fantastic design

@paulrowley71 3 года назад

That turned out really nice. Great work. 👍🏻

@stephensmith5587 3 года назад

Great ideas combined with well thought out design. looking forward to seeing the rear vertical drawer installation.

@gregmislick1117 3 года назад

Came out very nicely. Lots of nice ideas in there!

@andystephenson7102 3 года назад

Another very well thought out design, top notch fella 👌🏻

@bw162 Год назад

Great design. I think I might have tried to put the foot pedal arrangement on a side. I hate those lift pedals right where you stand.

@barnyardkh4 3 года назад

Will the push-to-open springs be strong enough once you get the drawers fully loaded? Drill bits and the like can be pretty heavy. If they do work, you better paint your drawer fronts because dirty hands will quickly ruin the nice clean look of your drawers otherwise. Nice work.

@paulhewitt7664 3 года назад

Brilliant design!

@juliantavalin4842 3 года назад

I'm thinking in the middle...how's he going to add that handle? There's CLEARLY no room. He didn't think it through! Wow major oversight. And then the piano hinges. Oh yeah, he's the genius and I'm the dummy. Wish I could leave two likes on this movie (and all the rest of his movies).

@marctripp3140 3 года назад

i know I'm kinda off topic but do anyone know of a good site to watch new movies online?

@tylerangelo4189 3 года назад

@Marc Tripp I watch on FlixZone. Just google for it :)

@collinabdullah3145 3 года назад

@Marc Tripp I would suggest FlixZone. You can find it on google :)

@Greg8872 3 года назад

Very nice! way better than a lot of the "Ultimate" type videos.

@stevehubner560 3 года назад

Well done there's a lot of work in that little cabinet it looks great!

@SweSuf 2 года назад

Very neat, and several clever solutions!

@johntovarbricomaniaco9359 Год назад

Excelente, extraordinario.

@Brian18741 3 года назад

Cap nuts or dome nuts over here in Ireland 🇮🇪. Great work as always, the push to open is a very nice touch! 👍

@michaelsnell4034 3 года назад

Also seen them called acorn nuts.

@joycemiller4716 3 года назад

Acorns in England 🏴󠁧󠁢󠁥󠁮󠁧󠁿

@ADBBuild 3 года назад

Acorn nuts in the US as well.

@sapnasalve9003 3 года назад

😎...Nice work... 👍

@mornewucherpfennig1336 3 года назад

Absolutely brilliant as always.

@geoffcapper5025 3 года назад

This is fantastic. Love the creative storage for all the things!

@MCsCreations 3 года назад

Really fantastic work, dude! It looks great! 😃 Happy holidays! And stay safe there with your family! 🖖😊

@kovzoljan 3 года назад

You're brilliant again! Simple and great each part. Excellent design! Thanks!

@billofalltrades1468 3 года назад

Very well done! Great design.

@DasShaten 3 года назад

You could do push to open on the smaller drawers, go to the back of the drawer router in a channel (on the side of the drawer) to allow for the push to open to live and there you go. (though the friction on the drawer slides may be to much for them)

@luigicicatiello3991 3 года назад

I'm really enjoying your works. So simple, so great. I'll use some of your ideas for my projects (If you don't mind...). Keep up the great work!!!

@309dill 3 года назад

I have heard them called Acorn nuts

@alistairfurnell126 3 года назад

Very very cool, Hamilton New Zealand

@MrGeroth 3 года назад

That is one fine cabinet. Thanks for sharing. Merry Christmas.

@crossgrainwoodproductsltd9230 Год назад

This has to be my favorite project of yours and this is the 3rd time watching it. I haven't looked, but I am hoping you have plans for it. After this 3rd viewing, I definitely want to build this for my shop. There are a lot of steps to the build so as you did, I will be doing this is steps so as not to get to over whelmed with a one day build. The genius of this design has to be the vertical drawer behind the pillar. Here I was just going to attach a shelf to the pillar that swings in when needed and back when not. I then would have had to find a placement for the rest of my drill bits and attachments. I just finished laying out every bit and attachment I have to make sure it will all fit. This will be a fun project!!

@Absfor30 3 года назад

You may need to double up on the push to opens for the removable unit... It's going to be heavier once that's got the bits in... Nevermind, I should really wait until the end of the video... Great project!

@docghines 3 года назад

Great project

@jasulliv3 3 года назад

I would add one detail to your drill bit storage unit. A vertical through all and a dawl on a "chain" as a travel lock. That can store in the handle area when not in use. Without somthing like that all of thous drawers of bits are going to shift the balance of your load and eject themselves onto the floor and then tip your other load the other direction. Don't ask how I know this.

@Kainosktisis 3 года назад

Nicely done, stand is way nicer than the tin box I've been using 🙄 bet you'll be able to find what you want when you need it!

@stanwiggins3423 3 года назад

Ever thought of using double sided tape instead of the blue tape when putting the MDF on the plywood? Less needed to do the same holding job.

@johnnygsdiy1981 3 года назад

Nice jobs. Stay creative!

@shawnr771 3 года назад

Very cool. Well thought out design. Merry Christmas. Look forward to more videos.

@WoodfulProjects 3 года назад

very ingenious ideas. well done

@grahamlewis9656 3 года назад

professional build as usual great have a good 2021

@thevjoiners 3 года назад

I love your work! 😍

@michaelposey6529 3 года назад

dammit, I caught myself blowing the dust off the router twice as you were routing the slots

@moelmakrani7116 3 года назад

Haha

@genelegate1308 3 года назад

In the US, those rounded nuts are called acorn nuts. Nice job on the project, it's exactly what I need to build for my drill press and all its odds and ends.

@Absfor30 3 года назад

Cap nuts from where I am from in the UK.

@TheHummingBeard 3 года назад

That's one beautiful build. It surely gave me some ideas for some of my storage solutions.

@scsolutions25 3 года назад

genius

@markweiner4430 3 года назад

You're clever.

@enriquemartinsanchez4613 Год назад

Un trabajo genial

@Zogg1281 3 года назад

That pull out drill bit box works really well and those handle are a great idea!! Very clever design. I hope you have a great Christmas and New Year 👍

@jan-agedeboer 3 года назад

"unfortunately I've run out of time" again.. But no worries looks awesome and love the process. Keep it up and greeting from the Netherlands 👍

@MultiKlompen 3 года назад

Wow, a lot of work! But it turned out very very great

@Валерій-я5п 3 года назад

Great work!

@moelmakrani7116 3 года назад

Nice job man! Cheers

@dominicchappell1399 2 года назад

Great work! Looking forward to seeing the rest of this series. I'm looking at plans for my own drill press and I really love your ideas.

@martyclack8782 3 года назад

Awsome job mate.

@THIRSTYGUMS 3 года назад

Very nicely done! but the MDF is not a nice material i reckon it needs finishing, veneer or paint? good vid though.

@keithbaker5042 3 года назад

Nice Job!!!

@idiotluggage 3 года назад

Wow! You have some great ideas in use. How did you line up everything for the loose bit drawers? The video makes it look like you are just that awesome with eyeballing it. :)

@BRICOLAJELISTO 3 года назад

Buenos departamentos para los accesorios.👍

@MrPatdeeee 3 года назад

You are truly a genius with the ideas you come up with. I can't wait to build one just like yours. Thank you kind Sir. May Jesus bless you and yours always.

@miker9951 3 года назад

Ever consider making a Drill Press Table? Would love to see your ideas on that

@WoodshopJunkies 3 года назад

It will form part of the completed cabinet.

@KC0ORL Год назад

@@WoodshopJunkies this post was over a year ago, just wondering what happened to building a table and if you have plans on your website somewhere for tjis drill press cabinet?

@clevelandexplorer2221 2 года назад

This is great as always :) I think it would be a really cool detail if that top facier of the pull out drawer of interest could pull up or perhaps even spring up automatically, when chalf the box is clear of the slot. Two reasons: the bottom has use of catching the push release, this would have a symmetrical use. Also a little shamfer of the box behind the upper facier would make it easy to do I reckon, if it can be done while hiding the fixing point-making it look really neat when pulled up/out :)

@zafarsyed6437 3 года назад

Recommend moving the handles further towards the front of the holder, so that the drawers naturally stay further back, such that you don't risk having a drawer and contents fall out

@VROne111 2 года назад

Beauty

@TizeN85 3 года назад

Looks nice ! You should paint it at least to protect it from oil when drilling metal :). Also did you plan to make a plan of it (even a paid one to support your channel !) ? I will be greatly interested to make something similar for my small workshop :)