Тёмный

Mazda Bose Speaker Repair | Rattling Blown Bose DIY Fix | 2014 Mazda 6 Grand Touring 

Darius Buildz
Подписаться 3,5 тыс.
Просмотров 17 тыс.
50% 1

Do you have a 2013-2021 Mazda 3/6/CX3/CX5/CX9? Does it have Bose? Does one of your front door speakers rattle? If you have answered yes to the previous 3 questions, then this video is for you!
If you are a little handy and know how to use super glue, you can possibly repair your speaker with the assistance of this video!
Take 6 minutes and enjoy the video! Hopefully it helps you!
Door clips: amzn.to/3F1yNHi
E6000 Glue: amzn.to/3xhuOSx
Materials used:
CA Glue: amzn.to/3qU4zha
Gorilla Super Glue Gel: amzn.to/2Wa0bw2
Trim Removal Set 5pc: amzn.to/3QbhnMt
Trim Removal Set 12pc: amzn.to/3xBfz8A
---
Do you Drive Your Car Everyday like I do?
If so, visit my Sponsor Daily Driver, Inc for Banners, Merch and More to rep that Daily Driver Status. Visit dailydriversin...
---
Need an Aftermarket Spoiler for your Roof or Trunk that is Made up of High Quality Polyurethane Material and is Custom Fitted to Your Vehicle, is Manufactured AND Packaged in the good ole US of A??
If so, visit my Sponsor SpoilerKing at www.spoilerkin...

Опубликовано:

 

13 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 53   
@brianohara8806
@brianohara8806 2 года назад
Just finished this fix with my son. I am NOT mechanically inclined and did it no problem. Music sounds great again. Thank you!!
@DariusBuildz
@DariusBuildz 2 года назад
Im glad your son’s sound has been restored!!
@digitalvizun5678
@digitalvizun5678 2 года назад
Thanks for making this video. My speakers started rattling a few weeks ago…this saved me a lot of money.
@DariusBuildz
@DariusBuildz 2 года назад
I’m glad it could help! E6000 glue would be my recommendation although the ca glue and gorilla gel super glue has been holding up fine for me.
@fuzzylumpkins6034
@fuzzylumpkins6034 6 месяцев назад
I came for the food and stayed for the company! Both speakers sorted, sound deadening done and rear tweeters upgraded. Cheers mate
@DariusBuildz
@DariusBuildz 6 месяцев назад
That sound deadening make a huge difference in these doors!
@bustan44
@bustan44 Год назад
Great vid dude. Bought my 2015 used and discovered the rattling speakers. I was imagining having to spend hundreds at the dealer for a replacement but I did this fix and just tested them. Cranked up some D'Angelo and by golly they're fixed and sound great. Thanks a ton.
@DariusBuildz
@DariusBuildz Год назад
I’m glad to see the video still helping people! Enjoy the better sound!
@andrewbelsen774
@andrewbelsen774 Год назад
hell yeah im doing this tomorrow, just got a 2014 6i GT and the speaker rattles insane. Thank you for the vid and saving me hundreds of dollars my dude.
@DariusBuildz
@DariusBuildz Год назад
No problem! It amazing how many people have this issue! It really is a problem
@andrewbelsen774
@andrewbelsen774 Год назад
@@DariusBuildz mission complete! i can actually listen to music now! Yeah the more ive looking into it the more I see others with the same issue. Great vid!
@AM-cz4fd
@AM-cz4fd 2 года назад
Thanks! Just bought a used Mazda 3 2016 and the speaker just started rattling. Going to do this tomorrow, thank you!
@DariusBuildz
@DariusBuildz 2 года назад
Best of luck on the repair. CA glue and super glue works well, but E6000 glue is a little more flexible and may hold longer!
@kristofferpence
@kristofferpence Год назад
What’s hilarious to me- I just watched and commented on your mileage update recently. And you said “the speakers will need to be fixed, at some point it will happen”. 5 days later, it happened 😂
@DariusBuildz
@DariusBuildz Год назад
Dam, 😂. Mazda gave us the budget barrel Bose.
@kristofferpence
@kristofferpence Год назад
@@DariusBuildz I’m definitely going to fix it asap, but considering replacing them in the near future. Just not sure what to go with lol. I haven’t been into stereos since I was 18 haha
@simonackerman333
@simonackerman333 Год назад
Great video. So far so good, the system sounds great again, all for the price of a bit of glue. Thanks
@DariusBuildz
@DariusBuildz Год назад
It’s so much better when they are not rattling!
@coffinraider1
@coffinraider1 4 дня назад
Thanks unc !
@DariusBuildz
@DariusBuildz 3 дня назад
No problem Nephew!
@lewisthomas1118
@lewisthomas1118 9 месяцев назад
You are a legend! 🎉❤❤❤❤
@DariusBuildz
@DariusBuildz 9 месяцев назад
I try!
@chrissymes8092
@chrissymes8092 Год назад
Hey with the rattling does the speaker also produce a degraded sound like really muffled? I’m pretty sure that the issue you show here is my problem also but not sure if it is this or the actual cone is damaged. I don’t particularly want to take off the door trim just too have a look (read- too lazy) and it is consistent 36 degrees c (98 degrees f?) here atm so that’s another thing. I know I’ll have to take it off eventually though 😂
@DariusBuildz
@DariusBuildz Год назад
Mine didn’t really sound muddled more than the apparent “flapping” from part of the surround being loose. But if you turn the bass down, does it sound fine, then as you increased the bass, it sounds more muffled?
@mattysxmusicxfiles9198
@mattysxmusicxfiles9198 9 месяцев назад
Could you use the CA-EM 2000 Thick Gap Filler in place of the CA-EM02 Thin that you used?
@DariusBuildz
@DariusBuildz 9 месяцев назад
I’m thinking so, bc I’ve seen people use silicon and E6000 for the repair as well.
@chriscarpen786
@chriscarpen786 8 месяцев назад
Solution: Buy some acoustic foam or material that is used fo dampen vibrations and stuff it in the door cup holder. That should alleviate most if not all of the issues with the audio. Visually, not the most appealing but it gets the job done for me at least. I can comfortably turn my bass to 4 and not have much rattles. Try it and let me know what happens
@DariusBuildz
@DariusBuildz 8 месяцев назад
Other than the speaker itself rattling, when I tightened the screws that attached the door trim to the doors, the rest of my rattles went away.
@chriscarpen786
@chriscarpen786 8 месяцев назад
@@DariusBuildz I did the same thing to my car and the rattles were still there. I also learned that windows rattle too. Rolling the window up and down seems to alleviate that
@keithtombs
@keithtombs 8 месяцев назад
Do you actually need this ribbed backing? Looking at mine and it looks like it doesn’t really do much but maybe a bit of resistance on the cone?
@keithtombs
@keithtombs 8 месяцев назад
Don’t worry… just answered my own question… it keeps the cone and coil lined up… so it really does need to be glued back in place.
@DariusBuildz
@DariusBuildz 8 месяцев назад
Ok. I was going to say, yes that is needed. If you were to cut out that the sub would not function.
@michaelv1984
@michaelv1984 Год назад
I’m using rtv silicone. They need to recall this because it’s on every Bose system from s wide range of years. My 2015 mazda 3 has had it for years on the passenger side and it drives me nuts. Even very low volume rattles badly.
@DariusBuildz
@DariusBuildz Год назад
It would have been nice for a recall. I have fixed about 15 speakers total between 3, 6, and CX5's.
@pcurley4
@pcurley4 2 года назад
Nice video!
@DariusBuildz
@DariusBuildz 2 года назад
Thank you! Trying to help people save some money!
@tehxii7706
@tehxii7706 4 месяца назад
Would regular Gorilla glue work with CA glue?
@DariusBuildz
@DariusBuildz 4 месяца назад
The gorilla gel super glue works as I have used that as well for the repair.
@Imenijebitno108
@Imenijebitno108 Год назад
Did you break any of the plastic hatches on the door panel?
@DariusBuildz
@DariusBuildz Год назад
Luckily I did not break any door clips. Some people have reported to have broken almost all of them.
@Imenijebitno108
@Imenijebitno108 Год назад
@@DariusBuildz can they be used again if I somehow broke them
@Imenijebitno108
@Imenijebitno108 Год назад
@@DariusBuildz Thank you very much, i repaired it. Found rust at the edges, saved 200$.
@burns985
@burns985 4 месяца назад
Is it better with selicone ?
@mastacrx
@mastacrx 4 месяца назад
I did it with flexible silicone based sealant, mind you used screen clamps and lefr it for 24h to dry.
@burns985
@burns985 4 месяца назад
@@mastacrx yes Sir. Thank you
@mastacrx
@mastacrx 4 месяца назад
@@burns985 No problem👍
@DariusBuildz
@DariusBuildz 4 месяца назад
Some people have used silicon with great success. I have also used E6000 glue as well.
@wongdewei9730
@wongdewei9730 2 года назад
Hi,I wanna ask any super glue work ?
@DariusBuildz
@DariusBuildz 2 года назад
I prefer the gel super glue, but E6000 is more flexible is will prob last longer long term.
@erinyoung5811
@erinyoung5811 2 года назад
Socket size for speaker removal?
@DariusBuildz
@DariusBuildz 2 года назад
I don’t remember exactly, but it’s probably a 10mm.
@MustPassTruck
@MustPassTruck Год назад
Trying to hear if your speaker rattle is like mine while in my mazda 6 is one of those DUH moments LOL
@DariusBuildz
@DariusBuildz Год назад
🤣. That made me laugh. Hearing a rattle via a rattling speaker 😭
Далее
ТИПИЧНОЕ ПОВЕДЕНИЕ МАМЫ
00:21
Просмотров 718 тыс.