McLaren Honda MP4/6 Part2 【 TAMIYA 1/12 scale 】Peeling off the cowl paint. Underfloor processing. 

Perfect. just you, the car and the sounds between the two. Love it. I enjoy being on the journey with you. Thank you for sharing your work, your time, your creative solutions.

元々の塗装を剥がす所は日焼けした肌を剥いてるみたいで快感。 何度も観てしまいます。

I still have the 1/10 RC version Tamiya made back in the early 90’s. Not as detailed as yours though but still a beautiful model just to have on display!

参考にしたいですが、やっぱり参考にできるレベルではないです😂 今後も楽しみにしてます😊

Looking forward to your ideas on how to overcome the challenges.

Another master piece is on the making. I've got two Tamiya 1/20 models I've build back in the 1990's but I build them "wrong" 😞. I mean, my building and painting technics were not as good as I wish so, I'm thinking seriously to rebuild them, I have new unbuilded models, but I want to keep them like that, brand new, so, maybe I'm gonna make the same you are doing, put them in an isopropyl alcohol bath and get/buy the decals again. One model is the Mansell's Lola T93 and the other one is Senna's Lotus 99T, plus the same 99T but radio control 1/10 car, Tamiya aswell, it needs repainting due to many years of "service". I have started and to sand off all the old paint is a pain 😅.

Its awesome to watch your talent and patience while building this project.

Zippoオイルの空き缶を利用するってのがいいですねぇ！ 欠品パーツが多いということは匠の技を沢山見れる…楽しみですなぁ👍

相変わらずやる事か凄いです😱 無い部品は作る？かっこいいです🤣 ワタクシには出来ません笑これからの動画もっと楽しみにしてます😀👍 頑張って下さい💪

As allways, love your style making videos. And your passion for modelling. 😘👍👋

When I was young one of the model magazine’s suggested using model airplane fuel to strip paint. I had just done a bad job on some big parts of a Tamiya 1/12 Porsche 910. What a mess. Glad you didn’t do that. 😂 Superb work. I enjoy every one.

楽しみにしてます😊

You are the best to do it👌

Wonderful work! I tried using Alcohol once and it made the body brital. I now use Heavy Duty Dot 3 Brake fluid. I would like to go back to alcohol due to the cost. Is there a certain brand or concentration you recommend? The use of the Zippo case was outstanding. Thanks so much for sharing your work.

Awesome model.

Really looking forward to this build!! 👍👍 I wish Tamiya would've supplied Scale Hardware with this model instead of Phillips Head screws, they just don't look scale.

Para despintar es ideal líquido de frenos, se deja en la tina y se despinta al 100%

Hi, I am trying to work out why you separated and re-joined the undertray. Is this a feature of the real car ?

Nice job , Where do you bey that sanding paper ?

あー、ただの神がかった職人さんの所業って事ですね。 なんか、日本人の器用さが海外の人にも受けているようですね もちろん、日本人の全員が、器用な訳では到底無い訳で、 職人のみが持ち得る至高の技な訳ですが・・

1:23 reminds me of me a couple of days after a good sunburn lol

Do you know the screw size that fits the body to the base? I’m redoing mine now Iv had 10 years

まさかシャシーの真横ぶった切ってZippoの空き缶を使って接続とか…😅誰もが考え付かなかった事を初めて見たのでびっくりしました。もしかして本物のシャシーはああいう作りになっているんでしょうか？資料とか見たこと無いので解らない😂

Santa is very Happy 😻 Santa Like your videos. Like and comment for your great Channel 👏

Why cut the under floor into two parts?

ペイントを除去するためにどのような製品/化学物質を使用しましたか?ありがとうございます😊

前のオーナーさん　ちゃんとサフ吹いてますね

塗膜を剥がしたい時、以前はラッカーシンナー溶剤を容器に入れて その中にボディをダイブさせたましたがやはり大量に溶剤を使うし臭うしで精神的にキツかったですが IPAだとあっさり塗膜が剥がれるのは助かります。いつ見ても手際のよさに関心します☆ 先は長いでしょうが陰ながら応援しております。頑張って下さい(*´ω｀*) いずれ自分も1/12F1に挑戦しようと思います(*´ω｀*)

すみませんサムネすいそうに漬けてる様で何してるんだろうと思って見に来た😮 TAMIYAにも1/12てあるんですね

ハンマーの叩き方が板金職人のよう。

塗料がペリペリとはがれる所がヘル・ミッショネルズのマスク刈りみたいに気持ち良いです(￣ー￣)ｂｸﾞｯ!

👍

やっぱり 欠品は作っちゃうのね(^^;

Useless handlings

Какое то индийское машиностроение