No video :(

MEC Marksman Press, 2 Year Review!

Подписаться 32 тыс.

Просмотров 21 тыс.

50% 1

We are reviewing the MEC Marksman Press after 2 Years! This is still an Excellent Press and I continue to recommend it to anyone who asks what press to buy. This press has thousands of rounds on it now and it's holding up like a champ! Anyone who invests in a reloading press should surely take a look at this one. Its ease of use and superior build quality is a must have for anyone looking to reload with precision.
Couple with with some quality dies like Redding or Mighty Armory and you'll crank out reloads with precision.
#MECMarksman
#ReloadingPress
#Press
We are back on Patreon if you would like to help support the channel by clicking here: / vaughnprecision
Below are some products we use and recommend to our subscribers, by using these links you not only get good quality products but you are helping to support this channel at no additional cost!
MEC EZ Pac Shotshell Organizer
www.amazon.com...
MEC Funnel
www.amazon.com...
MEC Bottle Support
www.amazon.com...
MEC Charge Bar
www.amazon.com...
MEC 9000GN Press
www.amazon.com...
Best Scope on the Market, it the one I use personally
www.amazon.com...
Duck Targets
www.amazon.com...
Turkey Targets
www.amazon.com...
3D Targets
www.amazon.com...
Bench Block
www.amazon.com...
Tekton Punch Set
www.amazon.com...

Опубликовано:

14 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 79

@SimpleLife1971 Год назад

I bought mine almost a year ago and have only one regret.......(drum-roll).....I didn't by it sooner! What an outstanding design and build! Great review!

@The1jonnyz 27 дней назад

I've been using this press for 3 years and it's still good as new. The only thing I don't like is it doesn't catch all the spent primers. My solution was to use the bottom half of an Android phone box. It slides through the stand and sits perfectly and catches all the primers that the MEC tray misses. You just have to cut the front of the box down to fit under the arm. Thanks for the review!

@timfarley6493 3 года назад

Curt, I bought my MEC press around the same time you did, and like you, I was impressed and still am. You can resolve the occasional primer popping out of the tray, by cutting a piece of felt to fit in the bottom and up the back of the tray, holding it in place with two-sided tape. I am sure glad you are back making videos. We can learn much from you.

@CyclopsJoeVideos 3 года назад

Dude your reloading videos are as good as Panhandle Precision . Super well made !

@mutantmutton 3 года назад

Fail! Panhandle Precision actually knows how to read a dial indicator.

@alanmeyers3957 4 месяца назад

@@mutantmuttonlol!

@ziadkhairallah1773 3 года назад

Thank you for your time you took to go through it. I follow your videos and I purchased a MEC to try it out and I am impressed by the "easy" feel to it. I already have a redding BB and this one is smoother. Both have great fit. I am happy how the ammo is turning out!! THAT is what matters the most.

@Sisu2280 3 года назад

Thanks for this - just picked one up with some Redding competition dies thanks to your first vid. I'm in Australia - won't frighten you with what I had to pay! I like to keep my stuff nice also, one idea for a future vid would be to see how you maintain the Marksmen (cleaning, lubing, etc!) I'd find that useful. Thanks and respect.

@LexLuthor1234 3 года назад

Agree on the idea of showing Good press maintenance. I'm a newbie And would most definitely like to see that. :)

@karlweiby2307 3 года назад

These are the reviews I like. After the product has been used and abused over time. So many times you see a guy review something after a week of use and it’s the best thing ever. Great video and it’s great to see you back in the shop putting out info!

@DimaProk 19 дней назад

Got mine soon after it came out and I love it. I didn't get the original stand because it stands tall as is already so I just made my own that puts the primer catch box flush on the table. My two minor complains is that even though I did everything I could to seat that primer drop chute with a hot glue gun and the gap is minimal - STILL I get primers on the floor now and then. And the 2nd is priming. Kind of wish I could prime with it for those few times when you want to load a random round or when you find that one proud primer that a hand held tool won't deal with it.

@leosharp1322 3 года назад

My red press has excessive play I'm going to get a Mec. Glad to see new videos .

@WestDesertShooter 3 года назад

I bought mine about a year after you did. No complaints here, it’s been awesome!

@michaeld9731 5 месяцев назад

I have a MEC Marksman press, too, and feel the same way you do about it--it's a fabulous press! Zero complaints!

@giljohnson432 3 года назад

I bought mine after watching your first video on this press. Love mine.

@jwiatrek 3 года назад

Love mine ... Have an older rock chucker that is showing its age (1982 purchase) ... Do NOT like the newer ones where you can mount the handle for left or right ... So bought the MEC and happy I did

@brettdearman4569 3 года назад

Based on your recommendation, I just bought a Mec Marksman. My old RCBS Rockchucker had the same kind of ram play that yours did. Looking forward to checking my runout to see if it helped. Thanks for all you do.

@vaughnprecision 3 года назад

Thanks man, I hope you like it! Follow up with me once you have it and let me know!

@brettdearman4569 3 года назад

Update: Just sized and loaded forty rounds using my Redding FL bushing die and the Mec press. My runout went from an average of .004 to less than .001. Never would’ve thought that a press could introduce runout like my old press was, but clearly I was mistaken. Thanks again for pointing me in the right direction and again, thanks for all your great videos and reviews. I’ve been reloading for a very long time, but this just goes to show that you’re never to old to learn new tricks.

@alanmeyers3957 4 месяца назад

@@brettdearman4569try taking the circlip/ shell holder retaining spring out of the RCBS.

@rdsattube 3 года назад

Glad to see you active again.

@darvinclement3250 3 года назад

Had mine for a couple of years as well and have nothing but good things to say about it.

@vaughnprecision 3 года назад

I couldn't agree more!

@wemcal 5 месяцев назад

Great video and wonderful information

@MrToddles12 3 года назад

I went with the Forster CoAx a couple years ago and sure enjoy it. Merry Christmas to all!

@CountryBoy-zl4fh 3 года назад

I bought this press about 3 or 4 months after your review back in 2018 and I would definitely recommend it to anyone wanting to produce highly concentric/accurate ammo. I also have gone to using Mighty Armory dies I believe they can't be beat for the money, the run-out I'm getting on 308 and 223 ammo is typically under half a thou.

@dougi1967 2 года назад

Thanks for the review! Gonna get it based on the positive experience you're enjoying.

@vaughnprecision 2 года назад

Still running mine to this day, still getting great results and smooth operation. I think you’ll be happy.!

@dougi1967 2 года назад

@@vaughnprecision I got the press and base online today, like for $260 plus $35 shipping, Titan Reloading.

@1917jmb 3 года назад

I've had mine for ~year and I couldn't be pleased more. I do get a laugh when a piece of brass launches because the shell holder spun and I didn't notice :)

@CorwinBos 3 года назад

Kurt, I pretty much can echo what you have said. I had several criteria when I bought a new press. Open front, ability to use LnL bushings, and able to be be run left handed. I looked at the Iron press, Coax, and the MEC. The Iron Ive heard has some issues with shell holder tipping. The Coax was too cramped as I have very large hands, cant be run left handed (handle can actually be in the way with some really tall seating dies), cant use LnL bushings. The MEC was a good fit as it could do all 3. Lastly, I am in WI, and being able to support what is a business that is an hour from me was a good thing. The best thing I did was swap the handle to be run lefty. I am right handed, but moving the lever is a dumb movement, so its perfect for my dummy left hand. This frees up my right hand to set brass and bullets which can do fine motor skills much better. I highly suggest giving it a try. It will improve your work flow a bunch. After I was happy with that I contacted Inline Fab and asked Dan to make me a left handed roller handle. Well worth the money spent as well.

@rlh7210 3 года назад

I had mine now just over two year. I also recommend the smaller handle

@zrbsrbija 3 года назад

Yep i also use the smaller handle for my co axe as well

@shutthegate8232 3 года назад

Thank you for the update.

@davecollins6113 Год назад

Being as theis press has the floating shellholder, that was what sold me on it. I have a 40 yr old Rockchucker, no real beefs with it. Also have a Co-Ax, it is worth the loot and then some, but, has some limitations and things that are awkward to do on it, or I have to buy a different tool for.. Like the front opening on the MEC better than the Rockchucker, spent primer handling is far better, it is plenty tall enough inside for 90% of reloaders needs. You say you found .0005 slop, shellholder makes up for that easily enough, and .0005 isn't really worth worrying about. MEC has plenty of experience at building presses, they did this one right, it actually feels better than the Co-Ax in operation to me. Having both is the best of both worlds though.

@therangersbulldogs6350 3 года назад

I have several single stage press, and honestly the best are made in europe, they are incredible(all the brands), I have a Turban, it's expensive but it's the price of quality(all in steel CNC machined, multi guidance with "plate" and bronze bushing with ball bearings). But there are other european brands with the same spec and "qualities", less than half oh the Turban press price(approx the same price than Forster co-ax).

@emoryzakin2576 3 года назад

Honestly I’m torn between the mec single stage or jumping to the Redding t7 turret. I will always love my lee and my Dillon but I want something in the middle

@vaughnprecision 3 года назад

I don't own the T7 but it seems to be a good press. I have a buddy who has one but the runout isn't quite as good, but still acceptable. Wish I owned one so I could show a test or comparison.!

@emoryzakin2576 3 года назад

@@vaughnprecision right and the runout is my main concern but I’ve heard there are some solutions to minimize it. More than likely I’m going to end up with both presses just have to get through these holidays! Just wanna thank you for the response and the awesome work you’ve helped me tremendously these last few months just wished you lived closer where I could catch a class! Life goals!

@DanielBoone337 2 года назад

I think you just made up my mind... I started with a RCBS Partner press and it was an ok press. I more recently picked up a new Dillon 550C and a very lightly used Hornady Lock-N-Load so I can size and do load development on the single stage then transfer everything to my Dillon to crank out ammo. My problem is that my Hornady press is already worn out with all kinds of slop in it and I've got to the point with my shooting and reloading that it's holding me back. So I started looking for a good single stage that will match up with the precision I can get out of my Dillon and everything I'm looking for keeps bringing me back to this press... Great video brother just subbed!!!

@vaughnprecision 2 года назад

I’m still running mine with thousands of rounds through it and it’s been a solid press for me. Just FYI, I take no money from any company, these are all my personal experience and I still recommend the MEC.! You’ll be happy with it if your running quality dies

@DanielBoone337 2 года назад

@@vaughnprecision I was also looking at the RCBS Summit and the Forster Co-Ax but I just keep coming back to this one. The fact your opinion is coming from long term use and that I've read reviews from other people who are having the same experience it's kind of a no brainer now... Thanks for the info brother it's much appreciated!!

@mitchmiyamoto3785 Год назад

You mentioned 6.5 grendel hand loading. I’ve been struggling to find a really accurate load for this caliber. So far my best load is xbr and 123smk. Have any suggestions?

@glefos3917 3 года назад

I’ll have to check my rockchucker. Probably 25k through it.

@texpatriot8462 3 года назад

Thank you for the informative video,. Merry Christmas to you are yours. I went with the Co-Ax to replace a Hornady. Stupid bushings would move if I breathed on them.

@bwr3rd 3 года назад

Love the hoodie!

@markschnittker4770 2 года назад

Im confused why run out is important if the shell holder floats anyway? Could a worn out press be considered "self centering"?

@charlesmarais4582 3 года назад

Very good review thank you. Wonder what longer term success of the RCBS "Summit" will be? Where I live (South Africa) RCBS imports are always available but MEC less so. One does find that the MEC shotshell reloaders are imported now and then but usually it is a case of the future owner doing the importation, which in terms of the US ITAR regulations can be difficult.

@vaughnprecision 3 года назад

Hope you folks can see more of the MEC there, I like all 3 of mine. I’m not up to date on all the international shipping rules and regulations.

@nickmundo8265 2 года назад

Did u have any weird resistance screwing in any dies???? My Forster dies us some resistance. Also the bench primer from Lee, what kind of primer holder number is 6.5 Creedmoor?????

@carpenterpilot487 2 года назад

thanks for ur video!!

@TheColoradoconceal 3 года назад

Planning on purchasing this press. Total newbie to reloading tho. Any specific shell holders to use with this press? Thanks for the info!!

@comodice905 2 года назад

What maintenance and upkeep on press. Rebuild ect

@rapidfireXring 3 года назад

Where is the best price to be found. I was shopping and it seemed that a big price jump happened.

@conservativesniperhunter7439 3 года назад

I’ve had my eye on one of these MEC Marksman for a while now . I’ve been tossing up between the RCBS Rebel press , the Redding Big Boss or the MEC Marksman. Truthfully I don’t thinks I’ll go wrong with any of these bad boys but I’m leaning toward the MEC .

@vaughnprecision 3 года назад

For what it’s worth, the RCBS would be my last choice. I’d pick the MEC or Redding first. Just my 2 cents

@conservativesniperhunter7439 3 года назад

@@vaughnprecision Thanks . It’s looking like that will be my pick sometime in the new year . Cheers 🍻

@PlunderAndPillage 2 года назад

Have you considered installing the Hornady bushing conversion to make switching between dies a little quicker?

@vaughnprecision 2 года назад

No, I’m never in a hurry so it doesn’t bother me

@PlunderAndPillage 2 года назад

@@vaughnprecision I was curious if it would affect the quality of ammunition produced.

@yvestouchette4159 3 года назад

I wonder why/how the ram play is bad if some amount of float between the cartridge and the die is desirable?

@vaughnprecision 3 года назад

She’ll plate float is horizontal, Ram play is vertical and can cause runout

@eddieb9110 2 года назад

Does this press work with decapping dies? Or does the floating shell holder cause problems?

@vaughnprecision 2 года назад

Works great with them

@jimcastillo8950 3 года назад

Hello Sir, you said that this system is not a cam over. So how do you adjust your dies. Is it just simply till it touches it ? Thank you

@vaughnprecision 3 года назад

If you follow the instructions from the die manufacturers they set up just the same really.

@tommcqueen3145 Год назад

👍

@mutantmutton 3 года назад

How does .003" equal half a thousandth? I see 30 × 0.0001" on your dial @ 2:55 in this video. 1/2 a thousandth is .0005" Your dial is sweeping .003", which is three thousandths.

@mutantmutton 3 года назад

Hello? Are you just going to ignore this question? I think it is questionable, at best, to have affiliate links to a product that you have clearly misrepresented.

@edmurray5763 3 года назад

Its an 1 and 10,000 micrometer

@JohnDoe-jn4ex Год назад

Super users friendly...

@jeffhdpd782 9 месяцев назад

so given the measurement of the movement how does that compare to any others? for context

@vaughnprecision 9 месяцев назад

I’ve measured a few, it’s at least 50% better in some cases and even more in others.

@jeffhdpd782 9 месяцев назад

@@vaughnprecision that’s really good to know. I appreciate it. I’m in the process of buying the necessary equipment to start doing my own reloads, and I’ve been fussing over which press to get and I really like the Mec. But I wasn’t sure how it stacked up to all the other single stage press is out there, considering it hasn’t sold nearly as many as you typically see with our TBS or Lee or any of the rest. I really do like the design and I think based on this review that you did, I’m probably gonna end up getting this one so thanks for your review.

@wolverinekut 3 года назад

👍💯

@jeffreyweekley6974 3 года назад

No , .030 is not impressive ! What did it measure when it was new ?

@ziadkhairallah1773 3 года назад

I think he miss-read the indicator but it is not what you wrote (0.03")...It is still a 0.003" and still impressive. We are talking about 0.0015" clearance on each side. That is good and no matter what measured new, still a very good fit. If you maintain it, it will last several lifetime.

@rcflyeryou Год назад

I just received my Marksman, and my first impressions of it are terrible. The entire front and back of the vertical supports have huge gouges where someone took an angle grinder and chewed up the surface prior to powder coating it. It's hard for me to have any kind of confidence that there is any kind of precision in this press, if they are willing to do this. I called to talk with them and got the too bad, so sad, but that is the way they are line. This is a crock.